Order restricted randomized designs for control versus treatment comparison

We develop a method of randomizing units to treatments that relies on subjective judgement or on possible coarse modeling to produce restrictions on the randomization. The procedure thus fits within the general framework of ranked set sampling. However, instead of selecting a single unit from each set for full measurement, all units within a set are used. The units within a set are assigned to different treatments. Such an assignment translates the positive dependence among units within a set into a reduction in variation of contrasting features of the treatments. A test for treatment versus control comparison, with controlled familywise error rate, is developed along with the associated confidence intervals. The new procedure is shown to be superior to corresponding procedures based on completely randomized or ranked set sample designs. The superiority appears both in asymptotic relative efficiency and in power for finite sample sizes. Importantly, this test does not rely on perfect rankings; rather, the information in the data on the quality of rankings is exploited to maintain the level of the test when rankings are imperfect. The asymptotic relative efficiency of the test is not affected by estimation of the quality of rankings, and the finite sample performance is only mildly affected.     

A finite element-spherical harmonics radiation transport model for photon migration in turbid media

In this paper, we solve the steady-state form of the Boltzmann transport equation in homogeneous and heterogeneous tissue-like media with a finite element-spherical harmonics (FE-P_N) radiation transport method. We compare FE-transport and diffusion solutions in terms of the ratio of absorption to reduced scattering coefficient, (μ_a/μ_s′) and the anisotropy factor g. Two different scattering phase function formulas are employed to model anisotropic scattering in the slab media with high g-value. Influence of void-like heterogeneities, and of their boundaries with the surrounding medium on the transport of photons are also examined.     

Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

Chemical-effect variation of Kβ/Kα X-ray intensity ratios in 3d elements

Chemical effects on Kβ/Kα X-ray intensity ratios for some Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn compounds are studied experimentally. The X-ray spectra were measured by using a Si (Li) solid state detector with high resolution. The vacancies were produced by heavily filtered ²⁴¹Am gamma rays. It is found that the Kβ/Kα X-ray intensity ratios measured with compounds deviated up to 43% from the corresponding values of the pure elements. The values for pure elements are compared with the other experimental and with theoretical values.     

Conversion of Allylic Alcohols into Allylic Nitromethyl Compounds via a Palladium-Catalyzed Solvolysis: An Enantioselective Synthesis of an Advanced Carbocyclic Nucleoside Precursor(1)

A two-step reaction sequence to homoallylic nitro compounds from allylic alcohols is presented. Ethoxy carbonylation of the alcohols with ethyl chloroformate provides the corresponding allylic ethyl carbonates in high yields. Exposure of these substrates to catalytic palladium(0) in CH(3)NO(2) initiates a reaction sequence, ionization-decarboxylation-nitromethylation, that culminates with the formation of nitroalkenes. The regio- and stereochemical outcomes of the nitromethyl allylation reaction can be explained by the behavior of the transient pi-allylpalladium complexes. This methodology serves as a centerpiece for the synthesis of an important carbocyclic nucleoside intermediate.     

99mTc-labelled human serum albumin: Chemical and electrochemical labelling methods

The labelling of human serum albumin /HSA/ with^99mTc has been investigated using a chemical method /stannous citrate/ and electrolytically generated tin/II/ ions. A comparative study of various chemical parameters and current intensities has been carried out in order to find the optimal conditions for labelling. The labelling yield was over 95%, for the chemical and electrolytical methods.     

Sodium p‐nitro­benzoxasulfamate monohydrate

The title compound, alternatively named sodium 6‐nitro‐3H‐1,2,3‐benzoxa­thia­zole 2,2‐dioxide monohydrate, Na⁺·C₆H₃­N₂O₅S^?·H₂O, consists of chains of NaO₇ units, with the seven donor‐O atoms coming from two water mol­ecules and five p‐­nitro­benzoxasulfamate anions. The seven‐coordinate geometry around the Na⁺ ion is described as monocapped trigonal prismatic, but with a large distortion from ideal geometry. Each triangular face is defined by one O atom each from a water mol­ecule, a nitro group and a sulfonyl group. An O atom from a sulfonyl group caps one of the square faces of the trigonal prism in an unsymmetrical fashion. The water mol­ecules and one sulfonyl O atom are involved in bridging adjacent units, as is the nitro group of the anion. The sulfamate ions adopt an antiparallel alignment between the NaO₇ units and are connected to each other by C—H?O and π–π interactions. The three‐dimensional crystal structure is stabilized by a network of strong O—H?N hydrogen bonds.     

Synthesis, molecular and crystal structure of bis(triethanolamine)manganese(II) saccharinate: a seven-coordinate manganese complex with tri- and tetradentate triethanolamine ligands

The synthesis, molecular and crystal structure of bis(triethanolamine)Mn(II) saccharinate, [Mn(tea)₂](sac)₂ are reported. The configuration of the tea ligands results in an unusual example of coordination number seven for the Mn(II) ion. The two triethanolamine (tea) ligands coordinate to the Mn(II) ion forming a monocapped trigonal prism geometry, in which one of the tea ligands behaves as a tridentate ligand, while the other one acts as a tetradentate donor. The free and coordinated hydroxyl hydrogens of the tea ligands are involved in hydrogen bonding with the amine nitrogen, carbonyl and sulfonyl oxygens of the neighbouring sac ions to form a three-dimensional infinite network. A weak π–π interaction between the phenyl rings of the sac ions also occurs.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Solid phase extraction and preconcentration of uranium(VI) and thorium(IV) on Duolite XAD761 prior to their inductively coupled plasma mass spectrometric determination

A simple and effective method is presented for the separation and preconcentration of thorium(IV) and uranium(VI) by solid phase extraction on Duolite XAD761 adsorption resin. Thorium(IV) and uranium(VI) 9-phenyl-3-fluorone chelates are formed and adsorbed onto the Duolite XAD761. Thorium(IV) and uranium(VI) are quantitatively eluted with 2 mol L⁻¹ HCl and determined by inductively coupled plasma-mass spectrometry (ICP-MS). The influences of analytical parameters including pH, amount of reagents, amount of Duolite XAD761 and sample volume, etc. were investigated on the recovery of analyte ions. The interference of a large number of anions and cations has been studied and the optimized conditions developed have been utilized for the trace determination of uranium and thorium. A preconcentration factor of 30 for uranium and thorium was achieved. The relative standard deviation (N = 10) was 2.3% for uranium and 4.5% for thorium ions for 10 replicate determinations in the solution containing 0.5 μg of uranium and thorium. The three sigma detection limits (N = 15) for thorium(IV) and uranium(VI) ions were found to be 4.5 and 6.3 ng L⁻¹, respectively. The developed solid phase extraction method was successively utilized for the determination of traces thorium(IV) and uranium(VI) in environmental samples by ICP-MS.