Intermolecular interaction in an open-shell pi-bound cationic complex: IR spectrum and coupled cluster calculations for C2H2+-Ar

The intermolecular potential energy surface (PES) of Ar interacting with the acetylene cation in its (2)Pi(u) ground electronic state is characterized by infrared photodissociation (IRPD) spectroscopy and quantum chemical calculations. In agreement with the theoretical predictions, the rovibrational analysis of the IRPD spectrum of C(2)H(2) (+)-Ar recorded in the vicinity of the antisymmetric CH stretching fundamental (nu(3)) is consistent with a vibrationally averaged T-shaped structure and a ground-state center-of-mass separation of R(c.m.) = 2.86 +/- 0.09 A. The nu(3) band experiences a blueshift of 16.7 cm(-1) upon complexation, indicating that vibrational excitation slightly reduces the interaction strength. The two-dimensional intermolecular PES of C(2)H(2) (+)-Ar, obtained from coupled cluster calculations with a large basis set, features strong angular-radial coupling and supports in addition to a global pi-bound minimum also two shallow side wells with linear H-bound geometries. Bound state rovibrational energy level calculations are carried out for rotational angular momentum J = 0-10 (both parities) employing a discrete variable representation-distributed Gaussian basis method. Effective spectroscopic constants are determined for the vibrational ground state by fitting the calculated rotational energies to the standard Watson A-type Hamiltonian for a slightly asymmetric prolate top.     

Simulation of variations in mechanical properties of polyurethane elastomers modified with carbon nanotubes

The addition of extremely small portions of single-wall carbon nanotubes causes an anomalous change in mechanical properties of a cross-linked polyurethane-amide-urea elastomer containing 10% of polyamide-6; namely, with a nanofiller content of hundredths and thousandths of a percent, local maxima of elastic modulus and ultimate stress are observed. In the work, the anomalous variation in the elastic modulus is simulated relying on the concept of intermediate phase layer formation at the boundary of contacting particles of the initial material.     

Effect of Radiation from an Infrared Laser and <Emphasis Type="Italic">γ</Emphasis>-Rays from <Superscript>60</Superscript>Co on the Molecular–Topological Structure of Polyvinylidene Fluoride

We investigate the molecular–topological structure of polyvinylidene fluoride (PVDF) irradiated with γ-rays from ⁶⁰Co and IR radiation from a carbon dioxide laser by the thermomechanical spectroscopy method. The initial PVDF has a topological three-block network structure containing the low- and high-temperature amorphous blocks and crystalline fragments. Both types of irradiation can initiate interblock mass transfer of the macromolecular fragments from the amorphous to the crystalline form. As a result, unlike the predominantly amorphous structure of the native polymer, which is 7% crystalline, the weight fraction of the crystalline modification of the PVDF due to irradiation by an IR laser increases to 72%. Comparative analysis leads to the conclusion that the PVDF has a greater resistance to γ-irradiation than to IR laser irradiation. After IR laser irradiation, the pseudo-network structure of PVDF undergoes noticeable changes. The quantitative content of the crystalline fragments of macromolecules increases by almost an order of magnitude; the mobility of chains is reduced, and the rigidity of the chains is increased. However, the molecular flow of the polymer irradiated by the laser and γ-rays begins in the same temperature range (437 – 441 K) near where the native polymer is flowing (438 K).     

Spherically symmetric inhomogeneous dust collapse in higher dimensional space-time and cosmic censorship hypothesis

We consider a collapsing spherically symmetric inhomogeneous dust cloud in higher dimensional space-time. We show that the central singularity of collapse can be a strong curvature or a weak curvature naked singularity depending on the initial density distribution.     

Studies of structures of poly-ε-caprolactam/montmorillonite nanocomposite: Part 2. Tests of annealed specimens

Using the novel version of thermomechanical analysis (TMA) method, a poly-ε-caprolactam (PA6) and its nanocomposite (PNC) containing 1.6 wt.% of montmorillonite (MMT) were examined. Several disc specimens of those as investigated in the first part of this article were then melted, annealed, and sheared at a rate of 0.5 s⁻¹ engendering ca. 140% strain at 240 °C in a rotational rheometer, and next solidified in ambient air. In PNC as in PA6 specimens prepared in the same way, an amorphous isotropic structure in the surface layer up to 0.5 mm thick was identified, with topological regions differing in thermal expansion properties and related a state of order. This finding differs from other tests, which detect a high level of crystallinity. Probably, it is related with small thickness of the tested layer of material and kinetics of solidification in ambient air.An increase in the free volume fraction, V_f^TMA, evaluated as equal to 3ΔαT_g (Δα is the difference in linear thermal expansion coefficients below and above the glass transition temperature T_g) and resulted from melting, annealing, shearing, and next solidification in ambient air was observed. It suggests that these operations introduce into the specimen some amount of gases (e.g., evaporated water absorbed when cooling) what increases thermal expansion over high-temperature transition of the high-temperature topological region. It means that V_f^TMA is a sum of all voids within a specimen tested (not only a real free volume) independently on their origin. Because of this, it is better to term it as micro or nanoporosity.     

Influence of Gamma-Irradiation and Thermal Annealing on Molecular–Topological Structure of Tetrafluoroethylene–Ethylene Copolymer

The molecular–topological structure of a tetrafluoroethylene copolymer with ethylene after γ-irradiation and thermal annealing has been studied. The pseudo-network structure of the copolymer contains, in addition to the amorphous block, crystalline segments of macromolecules in the role of branching sites. Topologically, the diblock structure of the copolymer after thermal annealing at 538 K is transformed into a three-block structure with the appearance of a high-temperature amorphous block. Irradiation of the copolymer with γ-rays to a dose of 150 kGy does not lead to appreciable changes in its molecular–topological structure.     

Influence of fluorine-containing lubricant on properties of NR/BR rubber

K95 experimental lubricant being a product of fluorine reaction with a blend of mutually soluble poly(fluorine alcohols) and poly(fluorine esters) with molecular weight 240-900 g/mol was studied as an additive for rubber compounds based on blend of NR and BR. It was thermally stable till 270-300 °C. For comparison, it was tested simultaneously with homogenizing agent, Struktol MS40. Lubricant K95 added in a quantity of 0.5 wt% reduced the viscosity of rubber compound; it also improved compound flow in the mold. Mechanical properties of cured rubber not decrease while resistance to abrasion and fatigue increased. K95 participated in forming strong physical junctions (lower molecular weight between junctions of thermally stable network) while Struktol MS40 reduced the networking degree of rubber. As a result, it acts a multifunctional additive for NR/BR rubber.     

Energy transfer in thermal and hyperthermal collisions between CN(X2Sigma+, v = 2) in selected rotational levels (Ni = 0, 1, 6, 10, 15 and 20) and N2

We report rate coefficients (k(tot,N(i))) for total removal of CN(X(2)Sigma(+), v = 2, N(i)) radicals from selected rotational levels (N(i) = 0, 1, 6, 10, 15 and 20) and for state-to-state rotational energy transfer (k(i-->f)) between levels N(i) and other rotational levels N(f) in single collisions with N(2). CN radicals have been generated using two sources: (a) the pulsed laser photolysis of ICN at 266 nm, which generates translationally 'hot' CN radicals; and (b) the pulsed laser photolysis of NCNO at 570 nm, which generates CN radicals with translational energies close to the average value at 298 K. Comparison of the values of k(tot,N(i)) obtained using these two sources of CN demonstrates: firstly, that the same results are obtained as long as time is allowed for the translationally hot CN radicals generated from ICN to be thermalised before radicals are promoted to a specific rotational level in v = 2 using a tuneable infrared 'pump' laser operating at ca. 2.45 micro m; and secondly, that the rate coefficients decrease, but the averaged cross-sections remain approximately constant, as the excess translational energy in CN radicals is moderated by collisions. With NCNO as the source of CN radicals, the observed values of k(tot,N(i)) do not depend on the delay between the pulses from the photolysis and pump lasers. Finally, we demonstrate that, for the non-reactive collision partner N(2) and with allowances made for the rate coefficients that are too small to measure directly, the sum of the state-to-state rate coefficients, Sigma(f)k(i-->f), for rotational energy transfer from a selected initial level N(i) agrees quite well with the value of k(tot,N(i)) for total transfer from the same initial level. The values of k(tot,N(i)) and of the state-to-state rate coefficients are compared with similar, earlier, results in which helium and argon were the collision partners. The relevance of these results to the study of collisions of CN with reactive collision partners is briefly discussed.     

Scattering by small defects in the neighbourhood of a fluid-solid interface

The scattering of incident plane elastic waves by a varietyof different defects that lie upon a fluid-solid interface isconsidered here using matched asymptotic expansions. The expansionscheme is developed in terms of a parameter , the ratio of typicaldefect length scale to a typical wavelength of the incidentfield, taken to be small. Three different canonical situations occur and these are illustratedvia three specific examples treated here: a rigid strut, anedge crack, and a rigid strip. In each case the leading-ordermatching is performed to identify the leading-order contributionof the defect to the acoustic field in the far field. In particular,each defect is identified with a source of dipole response ininterfacial stress of displacement. It is shown in the limit as s<<s1 that in the inner problemsthe fluid and solid pieces uncouple in a particularly convenientmanner allowing analytical solutions to be deduced. These arethen matched with appropriate outer solutions.     

Pressure influence on the ferromagnetic resonance in ferrodielectrics

The pressure influence on the ferromagnetic resonance (FMR) is considered. Magnetostatic mode coupling caused by sample compression is taken into account by means of a perturbation theory. Two simple models are considered for strong coupling when perturbation theory works badly.