Synthesis of RE Y zeolite for formulation of FCC catalyst and the catalytic performance in cracking of n-hexadecane

Research on Chemical Intermediates - This study presents the synthesis of rare earth-doped Y (RE Y) zeolite, its application in formulation of a fluid catalytic cracking (FCC) catalyst and the...     

Synthesis of hexagonal zeolite Y from Kankara kaolin using a split technique

Synthesis of hexagonal zeolite Y from Kankara kaolin using a split technique is presented. The technique entails splitting kaolin to alumina and silica components. These components were further recombined to synthesize zeolite Y. The as-synthesized NaY zeolite was transformed to REY zeolite. Characterizations of the as-synthesized zeolite Y were carried out using X-ray diffraction (XRD), X-ray fluorescence (XRF), Brunauer–Emmett–Teller (BET) texture analysis, scanning electron microscope (SEM), transmission electron microscope (TEM) and Fourier transform infrared (FTIR) spectroscopy. Catalytic desulfurization of the as-synthesized REY zeolite was studied using microwave assisted desulfurization of model diesel. The Si/Al molar ratio of the as-synthesized NaY zeolite was 4.27. The crystallinity of the as-synthesized NaY and REY zeolites were 79.1 and 56.5% respectively. The as-synthesized NaY and REY zeolites possessed hexagonal morphology with average crystal sizes of 200 and 100 nm respectively. The specific surface area, pore volume and pore diameter of the as-synthesized NaY zeolite were 732 m² g^?1, 0.2611 cm³ g^?1 and 1.426 nm respectively. The specific surface area, pore volume and pore diameter of the as-synthesized REY zeolite were 456 m² g^?1, 0.1591 cm³ g^?1 and 1.395 nm respectively. Zeolite Y synthesized using the split technique possessed physiochemical properties comparable to the commercial zeolite Y, it was also free of quartz and competing phase impurities reported in previous works. The as-synthesized REY zeolite resulted to 79% sulfur reduction when used as a catalyst in a microwave desulfurization of model diesel at 100?°C for 15 min.     

Magnetic recyclable eggshell-based mesoporous catalyst for biodiesel production from crude neem oil: Process optimization by central composite design and artificial neural network

A magnetically recyclable eggshell-based catalyst (MKEC) was synthesized to circumvent saponification during the conversion of neem, Jatropha, and waste cooking oils (free fatty acid, 2.3–6.6%) to biodiesel. The characterization results indicated that MKEC had a mesoporous structure with the pore width of 3.24 nm, a specific surface area of 128 m²/g, and a pore volume of 0.045 cm³/g. The results confirmed that the MKEC is more tolerant to fatty acid poisoning than calcined eggshell. The effects of process parameters for maximum fatty acid methyl ester (FAME) content were evaluated by central composite design (CCD) and artificial neural network (ANN). The experimental FAME content of 94.5% was achieved for neem oil with a standard deviation (SD) of 0.68, which was in reasonable agreement with predicted values (CCD, 96.9%; ANN, 95.9%; SD, 0.73). The reusability studies showed that the mesoporous catalyst can be reused efficiently for five cycles without much deterioration in its activity.     

Recording long-term potentiation of synaptic transmission by three-dimensional multi-electrode arrays

Background  

Multi-electrode arrays (MEAs) have become popular tools for recording spontaneous and evoked electrical activity of excitable tissues. The majority of previous studies of synaptic transmission in brain slices employed MEAs with planar electrodes that had limited ability to detect signals coming from deeper, healthier layers of the slice. To overcome this limitation, we used three-dimensional (3D) MEAs with tip-shaped electrodes to probe plasticity of field excitatory synaptic potentials (fEPSPs) in the CA1 area of hippocampal slices of 129S5/SvEvBrd and C57BL/6J-Tyr^C-Brd mice.     

Protein foam application for enhanced oil recovery

Protein foam was explored as a foaming agent for enhanced oil recovery application in this study. The influence of salinity and oil presence on bulk stability and foamability of the egg white protein (EWP) foam was investigated. The results were compared with those of the classical surfactant sodium dodecyl sulfate (SDS) foam. The results showed that the EWP foam is more stable than the SDS foam in the presence of oil and different salts. Although, the SDS foam has more foamability than the EWP foam, however, at low to moderate salinities (1–3 wt% NaCl), both foam systems showed improvement in foamability. At a NaCl concentration of 4.0 wt% and above, foamability of the SDS foam started to decrease drastically while the foamability of the EWP foam remained the same. The presence of oil has a destabilizing effect on both foams but the EWP foam was less affected in comparison to the SDS foam. Moreover, increasing the aromatic hydrocarbon compound percentage in the added oil decreased the foamability and stability of the SDS foam more than EWP foams. This study suggests that the protein foam could be used as an alternative foaming agent for enhanced oil recovery application due to its high stability compared to the conventional foams.     

Rheological properties of surface-modified nanoparticles-stabilized CO2 foam

This study investigates the rheological properties of surface-modified nanoparticles-stabilized CO₂ foam in porous media for enhanced oil recovery (EOR) applications. Due to the foam pseudo-plastic behavior, the foam apparent viscosity was estimated based on the power law constitutive model. The results show that foam exhibit shear-thinning behavior. The presence of surface-modified silica nanoparticles enhanced the foam bulk apparent viscosity by 15%. Foam apparent viscosity in the capillary porous media was four times higher than that in capillary viscometer, and foam apparent viscosity increased as porous media permeability increases. The high apparent viscosity of the surface-modified nanoparticles-stabilized foam could result in effective fluid diversion and pore blocking processes and enhance their potential applications in heterogeneous reservoir.     

Mechanistic study of nanoparticles–surfactant foam flow in etched glass micro-models

This study was conducted in order to identify the pore-level mechanisms controlling the nanoparticles–surfactant foams flow process and residual oil mobilization in etched glass micro-models. The dominant mechanism of foam propagation and residual oil mobilization in water-wet system was identified as lamellae division and emulsification of oil, respectively. There was inter-bubble trapping of oil and water, lamellae detaching and collapsing of SDS-foam in the presence of oil in water-wet system and in oil-wet system. The dominant mechanisms of nanoparticles–surfactant foam flow and residual oil mobilization in oil-wet system were the generation of pore spanning continuous gas foam. The identified mechanisms were independent of pore geometry. The SiO₂-SDS and Al₂O₃-SDS foams propagate successfully in water-wet and oil-wet systems; foam coalescence was prevented during film stretching due to the adsorption and accumulation of the nanoparticles at the gas–liquid interface of the foam, which increased the films’ interfacial viscoelasticity.     

Hydroquinone Decorated with Alkyne,Quaternary Ammonium,and Hydrophobic Motifs to Mitigate Corrosion of X-60 Mild Steel in 15 wt.% HCl

1-(6-Bromohexyloxy)-4-propargyloxybenzene upon quaternization with 3-dimethylamino-1-propanol and N,N-dimethyldodecylamine produced two new inhibitor molecules: N-[6-(4-Propargyloxyphenoxy)hexyl]-N,N-dimethyl-N-(3-hydroxypropyl)ammonium bromide (PHAB) and N-[6-(4-Propargyloxyphenoxy)hexyl]-N,N-dimethyl-N-dodecylammonium bromide (PDAB), respectively, in excellent yields. The inhibitor molecules were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR spectroscopy. The inhibitors were evaluated for X-60 mild steel corrosion in 15 wt.% HCl using different electrochemical and gravimetric techniques. The potentiodynamic polarization confirms both the inhibitors as mixed-type corrosion inhibitors. A low concentration (15 ppm) of PDAB has demonstrated excellent corrosion inhibition efficiencies of 97%, 98%, and 86% at 25 °C, 50 °C, and 70 °C, respectively, for 24 h exposure time. SEM and EDX spectra reveal that the adsorptions of corrosion inhibitors on X-60 mild steel create a protective film that serves as a barrier to mitigate the corrosion process. The X-ray photoelectron spectroscopy confirmed the chemical interaction between the corrosion inhibitors and mild steel, which was predicted by the Langmuir adsorption model. Assembly of inhibitive motifs of the alkyne, π-electron-rich aromatic, quaternary ammonium and C₁₂ alkyl chain hydrophobe in PDAB has augmented its inhibiting action.     

Experimental study of the influence of silica nanoparticles on the bulk stability of SDS-foam in the presence of oil

The influence of silica nanoparticles on the bulk stability of SDS-foam in the presence of oil was investigated in this study using KRÜSS dynamic foam analyzer. The bulk foam static stability was evaluated from half-decay time, liquid drainage, bubble size distribution, and change in total height and volume of the generated foams with respect to time. Results clearly showed that foam stability in the presence of oil mainly depends on the viscosity and density of the oil. Foam stability increased with the addition of silica nanoparticles due to the aggregation of the nanoparticles at the thin lamellae of the foam, which prevents spreading of the oil at the gas–liquid interface. Moreover, optimum foam stability was obtained with the modified nanosilica–SDS mixtures, while slower liquid drainage from the foam did not generally result in high foam stability.