Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Optimisation of Supercritical Carbon Dioxide Systems for Complexation of Naproxen : Beta-Cyclodextrin

Supercritical carbon dioxide (scCO₂)offers several attractive scenarios for thepharmaceutical processing as an alternativeto aqueous and organic solvents. In thiswork naproxen, a widely used non steroidalanti-inflammatory drug with analgesic andanti-inflammatory properties, was chosenas a model drug. Its complexation with cyclodextrinsimproves the rate and extent of dissolutionof the drug, increase its rate of absorption and mayreduce the unpleasant side-effects of the drug.The interest in using this supercritical technologyled us to develop an experimental unit for the useof supercritical CO₂ as a processing medium forthe complexation of naproxen with beta cyclodextrin (CD).     

Adsorption mechanism of polylysine on hydroxyapatite and its effect on dissolution properties of hydroxyapatite

Adsorbed amounts of poly-l-lysine (pLys) and bromide ion on hydroxyapatite (HAp) from aqueous solutions of poly-l-lysine hydrobromide, and amounts of calcium and phosphate ions liberated concurrently from HAp during the adsorption of pLys were determined at 25 degrees . The pLys was adsorbed on HAp by the mechanism of ion-exchange between its amino groups and calcium ions of HAp. The released amount of calcium ion increased, therefore, with the adsorbed amount of pLys. On the other hand, the released amount of phosphate ion first decreased and then increased after attaining a minimum with the equilibrium concentration of pLys. The analysis using an equilibrium dialysis method revealed that the released phosphate ions were mainly in the bound state to the amino groups of pLys remaining in the solution, and that the concentrations of calcium and phosphate ions free from both HAp and pLys were restricted by each other under the law of the solubility product of HAp. The first decrease in the released amount of phosphate ion was concluded to be attributed primarily to the increase in the released amount of calcium ion because pLys remaining in the solution was little in this region. When sodium hydroxide was added to the solution, the adsorbed amount of pLys increased and then slightly decreased with the equilibrium pH of the solution due to the increase or decrease of the electrostatic attractive force between the adsorbate and the adsorbent. However, conformational change in pLys around pH 10 seemed to have little effect on the adsorption.     

Rh(II) catalysed intramolecular C-H insertion of diazo substrates in water: a simple and efficient approach to catalyst reuse

Water is an efficient solvent for the Rh2(OAc)4 catalysed intramolecular C-H insertion of a range of diazo substrates without competitive water insertion. Due to the high solubility and stability of the catalyst in water, the catalyst can be efficiently reused.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

Influence of the tannin structure on the disruption effect of carbohydrates on protein-tannin aggregates

The disrupting effect of three different ionic carbohydrates (xanthan, pectin and gum arabic) on the formation of tannin-protein insoluble aggregates was assessed by nephelometry using bovine serum albumin (BSA) and several procyanidin fractions previously extracted from grape seeds. The presence in solution of any of the carbohydrates studied was found to restrain the formation of insoluble protein-tannin aggregates for every procyanidin fraction used. Xanthan was the most effective carbohydrate, whereas gum arabic was the least effective. The present work has revealed that the disrupting effect of carbohydrates is quite different depending on the procyanidin structure complexity. In general, the three carbohydrates studied revealed a similar trend in that their disrupting effect on tannin-BSA aggregate formation decreased with increase of the procyanidin degree of polymerization.     

Recent discoveries on the structure of iodine(iii) reagents and their use in cross-nucleophile coupling

This perspective article discusses structural features of iodine(iii) compounds as a prelude to presenting their use as umpolung reagents, in particular as pertains to their ability to promote the selective coupling of two nucleophilic species via 2e⁻ oxidation.

This perspective article discusses structural features of iodine(iii) compounds as a prelude to presenting their use as umpolung reagents, to promote the selective coupling of two nucleophilic species via 2e⁻ oxidation.     

An insight into the mechanisms of the phototoxic response induced by cyamemazine in cultured fibroblasts and keratinocytes

The phototoxicity of cyamemazine (CMZ, Tercian), a neuroleptic of the phenothiazine family, has recently been reported in humans. CMZ has an absorbance maximum at 267 nm (molar absorptivity, 25,800 M(-1) cm(-1)) but a weaker molar absorptivity in the ultraviolet A (UV-A) region. CMZ exhibits a fluorescence with maximum emission at 535 nm and a quantum yield of 0.11. CMZ is a powerful photosensitizing agent toward HS 68 human skin fibroblasts and NCTC 2544 keratinocytes. At a UV-A radiation dose of 10 J/cm2, innocuous to cells in the absence of CMZ, the LD50 (lethal dose corresponding to 50% killing) are 0.5 and 1 microM for the fibroblasts and the keratinocytes, respectively, after overnight incubation with the drug. Short incubation times do not significantly alter the LD50. The CMZ-induced phototoxicity is accompanied by lipid membrane peroxidation consistent with the amphiphilic character of this photosensitizer. Keratinocytes are an order of magnitude less sensitive to the photosensitized lipid peroxidation than fibroblasts. Microspectrofluorometry reveals that lysosomal membranes are major sites of CMZ incorporation into the two cell lines because a Forster-type resonance energy transfer process occurs from CMZ to LysoTracker Red DND99 (LTR), a specific fluorescent probe of lysosomal membranes. The CMZ-photosensitized destruction of LTR demonstrates that CMZ retains its photosensitizing capacity after its lysosomal uptake.     

Gamma radiation effects on physical properties of parchment documents: Assessment of Dmax

Parchments are important documents that give testimony for History; therefore these materials should be respected and preserved. Considering incremental biodeterioration problems that have to be faced daily, the Archive of the University of Coimbra (AUC) is involved in different scientific projects in order to evaluate and determine new methods for document decontamination and preservation.The aim of this study was to evaluate gamma radiation effects on the colour and texture of the AUC parchment documents. The assessment of these effects was used to estimate the maximum gamma radiation dose (D_max) that could guarantee parchment documents′ decontamination treatment, without significant alteration of their physical properties. Parchment samples were exposed to gamma radiation doses ranging from 10 to 30 kGy. The texture and colour of samples were assessed before and after the irradiation procedure, using a texture analyser and an electronic colorimeter. Hardness and springiness were determined based on texture spectra. Lightness (L?), Chroma (C), greenness vs. redness (a*) and yellowness vs. blueness (b*) values were obtained from colorimetric measures. Results indicate no significant effects of gamma radiation on the texture and colour of parchment for the studied doses.     

On-off scheduling schemes for power-constrained electric vehicle charging

In this paper, we study the problem of establishing a dynamic charging schedule of electric vehicles (EVs) at a charging station, assuming that limited power implies that only a limited number of EVs can charge simultaneously. The only control we assume to be available to the charging station is the ability to (at any given time) turn on or off the power supply to any EV, with this tool we want to develop a charging schedule that will satisfy the energy demands of the EVs in their intended deadlines. We propose two distinct approaches to this problem: a discretized time version, based on a greedy-like algorithm, and a continuous time version, based on linear programming. We compare these two approaches and numerically study the improvement they yield in the efficiency of the charging procedure, when applied to simulated data based on real parking data. Finally, we illustrate the flexibility of the models by sketching several possible extensions.