Self‐curable polyester by a reaction of glycidol with maleic anhydride

The controlled reaction of equimolar quantities of maleic anhydride and glycidol in dimethoxyethane gives soluble polyesters with one hydroxyl group in each repeating unit. The reaction proceeds with stepwise ring opening of the components and gives highly viscous clear solutions in relatively short periods. In the first step, monomaleate ester formation takes place around 80 °C. The ring opening of the oxirane group is the second step, and it occurs at 120 °C. The overall reaction is the formation of soluble polyesters with moderate molecular weights (6000–18,000), without the elimination of water. The soluble polyesters can be crosslinked tightly by direct heating at 190 °C without additional vinyl monomer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2549–2555, 2003     

Weighted extended b-splines for one-dimensional electromagnetic problems

This paper considers the weighted extended b-splines as basis function for finite element method in electromagnetics and compares with the standard finite element method applied to the two-point boundary value problems with different boundary conditions. This new approach, which provides more accurate results than standard finite element method, is presented to compare other numerical techniques and applied to one-dimensional electromagnetic problems. Computed results are compared with other numerical results in literature.     

Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thermally induced fixed diradical generation on solid supports for surface‐initiated polymerization

A method is presented for generation of all surface‐bound radicals on solid polymer surfaces. Thus, secondary amide group of newly synthesized crosslinking comonomer, methacryloyloxyethyl methacrylamide was determined as versatile precursor for generation fixed diradicals on solid microspheres, obtained by copolymerization with methyl methacrylate (MMA) in aqueous suspension. Nitrosoation of the secondary amide groups on the microbeads and followed thermolysis above 90 °C was demonstrated to give surface‐bound radicals, capable of initiating polymerization of vinyl monomers, such as; styrene, MMA, N‐vinyl formamide, and N‐vinyl, 2‐pyrrolidone, as evidenced by H NMR, Fourier transform infrared, thermogravimetric analysis, and differential scanning calorimeter techniques. Appreciable grafting yields (55.1%–286.1%) and low free‐homopolymer formation (7.2%–19.7%) were noted within 6 h of the grafting at 100 °C in each case. This strategy involving the use of amide functional crosslinker seemed to be generally applicable to generate surface‐bound radicals for surface‐initiated polymerization from various solid substrates. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Papain Loaded Poly(ε-Caprolactone) Nanoparticles<Emphasis Type="Italic">: In-silico and</Emphasis><Emphasis Type="Italic">In-Vitro</Emphasis> Studies

Papain is a protease enzyme with therapeutic properties that are very valuable for medical applications. Poly(ε-caprolactone) (PCL) is an ideal polymeric carrier for controlled drug delivery systems due to its low biodegradability and its high biocompatibility. In this study, the three-dimensional structure and action mechanism of papain were investigated by in vitro and in silico experiments using molecular dynamics (MD) and molecular docking methods to elucidate biological functions. The results showed that the size of papain-loaded PCL nanoparticles (NPs) and the polydispersity index (PDI) of the NPs were 242.9 nm and 0.074, respectively. The encapsulation efficiency and loading efficiency were 80.4 and 27.2%, respectively. Human embryonic kidney cells (HEK-293) were used for determining the cytotoxicity of papain-loaded PCL and PCL nanoparticles. The in vitro cell culture showed that nanoparticles are not toxic at low concentrations, while toxicity slightly increases at high concentrations. In silico studies, which were carried out with MD simulations and ADME analysis showed that the strong hydrogen bonds between the ligand and the papain provide stability and indicate the regions in which the interactions occur.     

Localizing Binding Sites on Bioconjugated Hydrogen-Bonded Organic Semiconductors at the Nanoscale

Hydrogen-bonded organic semiconductors are extraordinarily stable organic solids forming stable, large crystallites with the ability to preserve favorable electrical properties upon bioconjugation. Lately, tremendous efforts have been made to use these bioconjugated semiconductors as platforms for stable multifunctional bioelectronics devices, yet the detailed characterization of bio-active binding sites (orientation, density, etc.) at the nanoscale has not been achieved yet. The presented work investigates the bioconjugation of epindolidione and quinacridone, two representative semiconductors, with respect to their exposed amine-functionalities. Relying on the biotin-avidin lock-and-key system and applying the atomic force microscopy (AFM) derivative topography and recognition (TREC) imaging, we used activated biotin to flag crystal-faces with exposed amine functional groups. Contrary to previous studies, biotin bonds were found to be stable towards removal by autolysis. The resolution strength and clear recognition capability makes TREC-AFM a valuable tool in the investigation of bio-conjugated, hydrogen-bonded semiconductors.     

Dose response of hydrazine – Deproteinated tooth enamel under blue light stimulation

The beta dose response and Optically Stimulated Luminescence (OSL) signal stability characteristics of human tooth enamel deproteinated by hydrazine reagent under blue photon stimulation are reported. Removal of the protein organic component of tooth enamel resulted in a higher OSL sensitivity and slower fading of OSL signals. The effect of chemical sample preparation on the enamel sample sensitivity is discussed and further steps to make this deproteinization treatment suitable for in vitro dose reconstruction studies are suggested.     

Poly(p‐phenylene methylene)‐based block copolymers by mechanistic transformation

The synthesis of poly(p‐phenylene methylene) (PPM)‐based block copolymers such as poly(p‐phenylene methylene)‐b‐poly(ε‐caprolactone) and poly(p‐phenylene methylene)‐b‐polytetrahydrofuran by mechanistic transformation was described. First, precursor PPM was synthesized by acid‐catalyzed polymerization of tribenzylborate at 16 °C. Then, this polymer was used as macroinitiators in either ring‐opening polymerization of ε‐caprolactone or cationic ring‐opening polymerization of tetrahydrofuran to yield respective block copolymers. The structures of the prepolymer and block copolymers were characterized by GPC and ¹H NMR investigations. The composition of block copolymers as determined by ¹H NMR and TGA analysis was found to be in very good agreement. The thermal behavior and surface morphology of the copolymers were also investigated, respectively, by differential scanning calorimetry and atomic force microscopy measurements, and the contribution of the major soft segment has been observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Strategies on the evaluation of binomial coefficients for all integers

Binomial coefficients are used in many fields such as computational and applied mathematics, statistics and probability, theoretical physics and chemistry. For accurate numerical results, the correct calculation of these coefficients is very important. We present some new recurrence relationships and numerical methods for the evaluation of binomial coefficients for negative integers. For this purpose, we give some comparisons of the outputs for different computer programming languages in case of negative integers, and also we wrote two new algorithms for computations.     

Synthesis of new polyamidoximes and their crosslinking by transition metal ions

Three new polyamidoximes (PAO) having appropriate functionalities to bind transition metal ions were prepared. The polymers were obtained by the reaction of dichlorooximino ethane with the corresponding diamine. Characterization and crosslinking of PAOs via coordination with transition metal ions such as Ni(II), Co(II), Cu(II), and UO₂(II) are presented. The crosslinked polymer complexes exhibit good thermal stability. It was also found that both square planar and tetrahedral coordination structures are present in the crosslinked polymers.