Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Investigation of mass attenuation coefficients of water, concrete and bakelite at different energies using the FLUKA Monte Carlo code

The mass attenuation coefficients of water, bakelite and concrete sample defined in the simulation package were obtained using the FLUKA Monte Carlo code at 59.5, 80.9, 140.5, 356.5, 661.6, 1173.2 and 1332.5 keV photon energies. The results for the mass attenuation coefficients obtained by simulation have been compared with experimental and the theoretical ones and good agreement has been observed. The results indicate that this process can be followed to determine the data on the attenuation of gamma-rays with the several energies in other materials. Also, the deposited energy by 661.6 keV photons at several thicknesses of each media was determined as being an important data for radiation shielding studies.     

Determination of lead, copper and manganese by graphite furnace atomic absorption spectrometry after separation/concentration using a water-soluble polymer

In this study, a water-soluble polymer, polyvinylpyrrolidinone (PVP) having chelating functionalities was used for the preconcentration and separation of traces of Pb, Cu, Ve and Mn prior to their determination by graphite furnace atomic absorption spectrometry. For this purpose, the sample and the PVP solutions were mixed and the metal bound polymer was precipitated by adding the mixture onto acetone. The precipitate was separated by decantation and dissolved with water. By increasing the ratio of the volumes of sample to water used in dissolving the precipitate, the analyte elements were concentrated as needed. The concentration of trace elements was determined using graphite furnace atomic absorption spectrometry. The analyte elements in matrix free aqueous solutions were quantitatively recovered. The validity of the proposed method was checked with a standard reference material (NIST SRM 1577b bovine liver) and spiked fruit juice, sea water and mineral water samples. The analytical results were found to be in good agreement with certified and added values. Detection limits (3δ) were 1.7, 3.6 and 4.1 μg l⁻¹ for Pb, Cu and Mn, respectively, using 10 μl of sample volume. The method is novel and can be characterized by rapidity, simplicity, quantitative recovery and high reproducibility.     

Determination of lead and nickel in Apple-Leaves and sea-water by electrothermal atomic absorption spectrometry after solid-phase extraction using Chromosorb-107 filled in a syringe

Lead and nickel were concentrated and separated after sorbing on Chromosorb-107 filled in a syringe prior to their determination by electrothermal atomic absorption spectrometry. To retain the analytes, the sample solution treated with or without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Then the analyte elements were eluted by drawing and discharging the suitable eluent. The optimum experimental conditions for quantitative recoveries of analytes (amount of sorbent, pH of sample, concentration and kind of eluent, flow rates of sample and eluent and adding of the effect of complexing agent) were investigated. Nickel was quantitatively retained at pH6 irrespective of whether it was complexed with APDC while the quantitative sorption of lead was achieved at pH8 only if it was treated with APDC prior to passing through the sorbent. The lead and nickel retained on the sorbent were eluted drawing and discharging 4.5 M HNO(3), respectively. If the concentration of analyte elements in the sample were too low to be detected, then they were concentrated by increasing the ratio of sample value to eluent volume as needed. The lead and nickel in spiked sea-water samples and in certified reference Apple-Leaves (NIST SRM 1515) standards were quantitatively (95%) recovered with R.S.D. of around +/-2%.     

Characterization of Sixteenth to Nineteenth Century Ottoman Silk Brocades by Scanning Electron Microscopy–Energy Dispersive X-Ray Spectroscopy and High-Performance Liquid Chromatography

Historical textiles in the Topkap? Museum, which are called silk kaftans and brocades by art historians from the sixteenth and nineteenth were characterized by scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDX) and high-performance liquid chromatography with diode array detection for identification of metal threads and dyestuffs. In the most Ottoman textiles, metal threads, especially belonging to the sultans, were used as the gold gild. Although the chemical composition of the samples on the surface may easily be obtained by SEM–EDX, the thickness of the thin gold layer on metal threads cannot be obtained directly. Hence, the goal of this project is to describe whether metal threads are gilded or not and to measure coating thickness. A new method was developed for measuring the thickness of gold layer, and the modeling was reformed. The SEM–EDX results were interpreted in accordance with the theoretical models. The coating thickness of metal threads was subsequently measured in ancient textiles. The thickness, depth, and valuable metal composition in the threads of the artistic objects were obtained by this approach. Dye analysis was used to characterize the presence of indigotin, carminic acid, ellagic acid, and luteolin in the historical textiles.     

Occupational prolonged organic solvent exposure in shoemakers: brain MR spectroscopy findings

Our purpose was to investigate, by magnetic resonance (MR) spectroscopy, the metabolite changes in the brains of subjects in the shoemaking industry who had been chronically exposed to organic solvents. A total of 49 male subjects and 30 age-matched healthy volunteers underwent detailed neurological and psychiatric examinations. All subjects had long-echo [repetition time (TR) 2000 ms, echo time (TE) 136 ms] single-voxel MR spectroscopy. Voxels (15 x 15 x 15 mm(3)) were placed in the parietal white matter, thalamus, and basal ganglia. N-acetylaspartate (NAA)/creatine (Cr) and choline (Cho)/Cr ratios were calculated. There was no significant difference between the study subjects and the control group in NAA/Cr ratios obtained from thalamus, basal ganglia, and parietal white matter. Cho/Cr ratios in thalamus, basal ganglia, and parietal white matter were found to be significantly increased compared to controls. There was a positive correlation between basal ganglia Cho/Cr ratio and duration of exposure (r = 0.63). MR spectroscopy should be performed to reveal metabolite changes and determine the degree of brain involvement in solvent-related industry workers.     

Phenolic acid contents, essential oil compositions and antioxidant activities of two varieties of Salvia euphratica from Turkey

This study was designed to evaluate the in vitro antioxidant activities of n-hexane (Hex), dichloromethane (DCM), methanol (MeOH) and essential oils (EO) extracts obtained from Salvia euphratica var. euphratica and Salvia euphratica var. leiocalycina and to determine their essential oil and phenolic acid compositions. The samples were screened for their antioxidant activity by using DPPH and β-carotene/linoleic acid assays. Methanol extracts of both varieties exhibited strong antioxidant activities. Our results showed that rosmarinic acid was dominant phenolic acid of MeOH extracts (39.4 and 55.8?μg?mg?1, respectively). The chemical compositions of essential oils of two varieties were analysed and their main components were determined as eucalyptol (18.4%) and trans-pinocarvyl acetate (24.9%), respectively. It can be said that these varieties could be used as natural antioxidant.     

Preparation and Optical Characterization of Sol-Gel Deposited Pb(Zr0.45Ti0.55)O3 Films

Homogeneous crack-free lead zirconate titanate (Pb(Zr_0.45Ti_0.55)O₃: PZT 45/55) films were prepared by a chemically modified sol-gel process using lead acetate trihydrate, zirconium n-propoxide, and titanium isopropoxide precursors. The coating solutions were modified by the addition of diethanolamine. Single and multilayer films were deposited with a 2000 rpm spin rate on fused silica and MgO(100) substrates. Multiple spin coating with an intermediate heat treatment in air at 400°C for 3 min between coatings was performed to obtain films up to 2 m in thickness. The formation of the tetragonal perovskite structure was found to depend on the intermediate firing temperature, final annealing temperature, and annealing time. A 650°C rapid thermal annealing treatment in oxygen was required to crystallize the PZT film into the perovskite structure. The films were characterized using optical spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and thermo-gravimetry and differential scanning calorimetry (TG-DSC). The optical constants of the PZT films were evaluated from spectral transmittance and reflectance measurements. Optical constants are presented over the visible and near infrared region.     

Applicability of alkanet (Alkanna tinctoria) extract for the histological staining of liver tissue

Staining of tissue is a significant process in histotechnology and staining techniques are used in the examination and diagnosis of diseases. The increase of international awareness for the environment, ecology, and health directed people to reduce toxic effluents and stop usage of dangerous chemical dyes. The present trend throughout the world is shifting towards to use of natural products over their synthetic alternatives. Therefore, in this study, the dyeing ability of alkanet plant on the cells of unstained sections taken from Wistar rat liver was investigated. The extract of Alkanna tinctoria contain naphthaquinone group of dyestuff. Chemical characterization of A. tinctoria extract was performed with HPLC-TOF/MS and UV spectra analysis, respectively. Different metal salts were used in the staining processes in order to obtain different colors. In the staining of without adding mordant (metal salt) to the extract, pale brown staining was obtained in the cytoplasm. Light pink color was obtained with the addition of CuSO₄ mordant. Dark pink-red color was achieved by adding alum, and also NiSO₄ was added for light purple staining. The staining of cytoplasm of different cells in liver tissue was achieved successfully with the extract of A. tinctoria and different colors were obtained using various mordants.