Enrichment of copper and nickel with solid phase extraction using multiwalled carbon nanotubes modified with Schiff bases

The behaviour of some Schiff bases in the presence of metal ions is very selective in complex formation. In this study, new, selective and easily prepared adsorbent materials have been developed. Multiwalled carbon nanotubes (MWCNTs) are quite suitable as supporting material for preparation of new solid phase adsorbents modified with Schiff bases due to their selective nature. Different Schiff bases were designed and synthesised as adsorbent agents for Ni(II) and Cu(II) ions, according to the literature, and MWCNTs were modified with these Schiff bases. The modification of CNTs was performed by adsorption from the alcoholic solution of Schiff base. The measurements of Ni(II) and Cu(II) ions were carried out using ICP-MS. Different parameters such as pH, model and eluent solution flow rates, eluent type, amount of ligand, sample volume and effect of foreign ions, which have an effect upon recovery of analytes, were investigated. The obtained results indicated that enrichment can be done with six modified adsorbent materials for Cu(II) at pH 9 and two modified adsorbent materials for Ni(II) at pH 8. It was concluded that four adsorbent materials were selective only for the enrichment of Cu(II). Merely one modified adsorbent material was noneligible for the enrichment of Cu(II) and Ni(II). The solid phase adsorbents prepared by modification with two of the Schiff bases used in this study showed an enrichment factor of 80 for both metal ions, whereas the solid phase adsorbents prepared by modification with four of the Schiff bases showed an enrichment factor of 40 for Cu(II) ions. The confirmation of the developed method was tested with certified reference materials with satisfactory results.     

Artificial neural network modeling of diuron and irgarol-based HPLC data and their levels from the seawaters in Izmir,Turkey

The LC determination of two well-known antifouling booster biocides, diuron and irgarol, was investigated from the seawaters in ?zmir, Turkey. The biocide levels were pre-concentrated through C18 solid-phase extraction cartridges and they were analyzed by the LC-UV method. An artificial neural network (ANN) was used to model the data obtained from LC optimization. Column temperature, percentage of acetonitrile, flow rate, wavelength, pH, and concentration of biocides were used as input parameters. The retention time was selected as output parameter. The best back-propagation algorithm in ANN modeling for diuron and irgarol was found to be the Levenberg–Marquardt algorithm. The limits of detection for diuron and irgarol were calculated as 25.38 and 39.49 ng L^?1, respectively. The inter-day and intra-day precisions were obtained less than 13.5% for each biocide. The recovery rate for diuron was 96.9% and for irgarol it was 84.6%. The maximum diuron and irgarol levels were measured as 1779 ng L^?1 and 908 ng L^?1, respectively. In conclusion, ANN is a robust modeling method to predict the retention time in LC studies. Since diuron and irgarol have been detected in Turkish waters, it is therefore suggested that booster biocides with less impact on the environment should be used in antifouling paint formulas.     

Brush Type Copolymers of Poly(3-hydroxybutyrate) and Poly(3-hydroxyoctanoate) with Same Vinyl Monomers via “Grafting From” Technique by Using Atom Transfer Radical Polymerization Method

Brush type graft copolymers of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxyoctanoate) (PHO) with methylmethacrylate, (MMA), styrene, (S), and n-butylmethacrylate, (n-BuMA) were obtained by using Atom Transfer Radical Polymerization Method, (ATRP), via “grafting from” technique. Firstly PHB and PHO were chlorinated by passing chlorine gas through their solution in CHCl₃/CCl₄ (75/25 v/v) mixture and CCl₄, respectively, in order to prepare chlorinated PHB, PHB-Cl, and chlorinated PHO, PHO-Cl, with different chlorine contents. The determination of the chlorine content in chlorinated poly(3-hydroxyalkanoate) (PHA-Cl) was performed by the Volhard Method. Then ATRP of vinyl monomers was initiated by using PHA-Cl as macroinitiators in the presence of cuprous chloride (CuCl)/2,2′-bipyridine complex as catalyst, at 90 °C in order to obtain brushes containing PHAs. The polymer brushes were fractionated by fractional precipitation methods and the γ values calculated from the ratio of the volume of nonsolvent (methanol) and the volume of solvent (chloroform) of brushes varied between 0.82 and 6.50 depending on the composition of brushes. The polymer products were characterized by gel permeation chromatography (GPC), ¹H NMR, FTIR, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques.