Silver chloride supported on Vitamin B1 -Organometallic magnetic catalyst: synthesis,density functional theory study and application in A3-coupling reactions

A highly efficient Fe₃O₄@VitB₁–Ag(I) magnetic catalyst has been obtained using surface modification of Fe₃O₄. To this end, silver chloride was immobilized on Fe₃O₄ nanoparticles via vitamin B₁ biomolecules. The synthesized biocompatible magnetic catalyst was applied in an A³-coupling reaction in the presence of aldehyde, amine and phenyl acetylene under solvent-free conditions and afforded the desired products in excellent yields. Also, interactions between metal and ligand in the Fe₃O₄@VitB₁–Ag(I) were studied using theoretical calculations.     

On the natural convection of nanofluids in diverse shapes of enclosures: an exhaustive review

Journal of Thermal Analysis and Calorimetry - The ultimate goal of the present review paper is to summarize and discuss the findings of the most recently published literature on natural convection...     

Synthesis and characterization of molecularly imprinted polymers for selective solid-phase extraction of pseudoephedrine

Molecular imprinted solid-phase extraction (MISPE) is a well known technique for the selective extraction and pre-concentration of analytes, are present at low levels in chemically complex materials. Herein, water-soluble, molecularly imprinted polymers (MIP) were prepared for solid-phase extraction of pseudoephedrine hydrochloride (PSE), which was monitored at 256 nm by the UV spectroscopy. MISPE conditions were optimized to allow the selective and determination of PSE in aqueous samples and composite materials, such as biological fluids and human urine. MIP was prepared by precipitation polymerization method, using methacrylic acid as a functional monomer and ethylene glycol dimethacrylate as a cross-linking agent in either acetonitrile or chloroform. The results suggest that the obtained MISPE exhibits high affinity for PSE, and the imprinted polymer demonstrates much higher efficiency than a non-imprinted polymer (NIP). The imprinting-induced extraction was confirmed by the determination of recovery values for NIP (4%) and MIP (80%) polymers, respectively. The binding capacity of the MIP for PSE was found of 47.6 mg g⁻¹.     

Influence of counter-anion on the coordination geometry of manganese(II) complexes with methyl-2-pyrazinecarboximidate ligand

Two new complexes of [Mn(2-MPyzCI)₂Cl₂].H²O (1) and [Mn(2-MPyzCI)₂(H₂O)₂](NO₃)₂ (2) were synthesized from the reaction of MnX₂.4H₂O (X=Cl^? and NO₃^?) with 2-cyanopyrazine in methanolic solution. The chelating methyl pyrazine-2-carboximidate (2-MPyzCI) ligand is formed via the methanolysis of 2-cyanopyrazine. Although coordination environment around manganes(II) ions is similar, but these complexes are different in geometrical position of 2-MPyzCI ligands. As both compounds are synthesized under the same reaction conditions, the only difference between these two complexes are counter ions and changing of geometrical position of ligands can be considered as a result of influence of the counter-anions on the molecular structures.     

Molybdenum hexacarbonyl supported on amine modified multi‐wall carbon nanotubes: an efficient and highly reusable catalyst for epoxidation of alkenes with tert‐butylhydroperoxide

In the present work, highly efficient epoxidation of alkenes catalyzed by Mo(CO)₆ supported on multi‐wall carbon nanotubes modified by 2‐aminopyrazine, APyz‐MWCNTs, is reported. The prepared catalyst was characterized by elemental analysis, scanning electron microscopy, FT IR and diffuses reflectance UV–vis spectroscopic methods. This new heterogenized catalysts, [Mo(CO)₆@APyz‐MWCNT], was used as a highly efficient catalyst for epoxidation of alkenes with tert‐BuOOH. This robust catalyst was reused several times without loss of its catalytic activity. Copyright © 2010 John Wiley & Sons, Ltd.     

SPE and HPLC/UV of resin acids in colophonium-containing products

A new method, involving SPE and HPLC/UV diode-array detection (DAD), was developed for the quantification of colophonium components in different consumer products, such as cosmetics. Colophonium is a common cause of contact dermatitis since its components can oxidize into allergens on exposure to air. Three different resin acids were used as markers for native and oxidized colophonium, abietic acid (AbA), dehydroabietic acid (DeA), and 7-oxodehydroabietic acid (7-O-DeA). The SPE method, utilizing a mixed-mode hydrophobic and anion exchange retention mechanism, was shown to yield very clean extracts. The use of a urea-embedded C(12) HPLC stationary phase improved the separation of the resin acids compared to common C(18). Concentrations higher than 2 mg/g of both AbA and DeA were detected in wax strips. In this product also 7-O-DeA, a marker for oxidized colophonium, was detected at a level of 28 microg/g. The LODs were in the range of 7-19 microg/g and the LOQs 22-56 microg/g. The method is simple to use and can be applied on many types of technical products, not only cosmetics. For the first time, a method for technical products was developed, which separates AbA from pimaric acid.     

Construction of a TiO2–Fe3O4‐decorated molecularly imprinted polymer nanocomposite for tartrazine degradation: Response surface methodology modeling and optimization

We synthesized a novel recoverable and reusable photocatalyst system for tartrazine degradation by one‐step incorporation of Fe₃O₄ and TiO₂ nanoparticles into a molecularly imprinted polymer through a facile precipitation polymerization method. The as‐prepared samples were systematically characterized using X‐ray diffraction, infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, energy‐dispersive spectroscopy, and vibrating sample magnetometry. Benefiting from the positive synergistic effect, tartrazine was almost completely degraded under UV‐C within 180 min by the multicomponent photocatalyst (Fe₃O₄ + TiO₂ + MIP) in comparison with far fewer activities by the corresponding NIP system and the nonmagnetic and bare structures. On the other hand, the central composite design in response surface methodology was applied to optimize the tartrazine photocatalytic degradation process. Twenty experiments were conducted by adjusting three parameters (nanocomposite dosage, initial pH of the reaction solution, and initial dye concentration) in the multiple variable analysis method. A satisfactory correlation between the experimental and predicted values was obtained (R² = 0.956). Additionally, ANOVA analysis with a p value of 1.15 × 10^–5 indicated that the model terms are highly significant. Under the determined optimum conditions, a verification experiment was conducted and shown the adequately approximate value between the predicted (99%) and the experimental (97%) results, which confirmed the validity of the model.     

ZnO nanorods as efficient catalyst for the green synthesis of thiophene derivatives: Investigation of antioxidant and antimicrobial activity

In this work, thiophene derivatives were synthesized in good yields via multicomponent reaction of isoquinoline, alkyl bromides, activated acetylenic compounds, isothiocyanates, and catalytic amounts of ZnO nanorods (NRs) at room temperature under solvent-free conditions. This procedure for the synthesis of thiophene derivatives is green, easy, and simple with excellent yield. In addition, DPPH radical scavenging and ferric reduction power experiment has been studied for the evaluation of the antioxidant activity of some prepared thiophenes, for example, 5b , 5d , 5e , and 5f . As outcome, the compound 5d exhibited a noteworthy radical trapping activity and excellent reducing ability than synthetic antioxidants such as butylated hydroxytoluene (BHT) and 2-tertbutylhydroquinone (TBHQ). Moreover, the antimicrobial activity of some synthesized thiophenes was confirmed by employing the disk diffusion test on Gram-positive and Gram-negative bacteria. The obtained results of disk diffusion test showed that compounds 5b , 5d , 5e , and 5f prevented bacterial growth.     

Simultaneous spectrophotometric determination of metformin hydrochloride and glibenclamide in binary mixtures using combined discrete and continuous wavelet transforms

In this work, a combined discrete and continuous wavelet transform analysis was developed for simultaneous spectrophotometric determinations of metformin hydrochloride and glibenclamide, two antidiabetic drugs, in binary mixtures without any chemical pretreatment. Absorption spectra were subjected to the 4-level db4 discrete wavelet transform (DWT) for signal de-noising. Selected continuous wavelet transform (CWT) families (rbio3.1 with scaling factor, a = 80, and gaus2, a = 60) were applied on these de-noised signals. Finally, a zero-crossing technique was used for the construction of calibration curves for both drugs. The proposed method was validated by analyzing synthetic mixtures of the investigated drugs with various concentrations. The amount of metformin hydrochloride and glibenclamide were determined by using CWT amplitudes in zero-crossing points. The mean recovery values of metformin hydrochloride and glibenclamide were found between 98.6-102.0 and 97.9-102.4% for rbio3 and 98.3-101.2 and 97.1-101.4% for gaus2 families, respectively. The obtained results showed that the developed method is a simple, rapid and precise procedure for the simultaneous determination of metformin hydrochloride and glibenclamide in binary mixtures.     

Amino Acids as Additives against Amorphous Aggregation: In Vitro and In Silico Study on Human Lysozyme

Applied Biochemistry and Biotechnology - The effect of 16 amino acids (AA) with various physicochemical properties was investigated on human lysozyme (HL) heat-induced amorphous aggregation....