Effect of surfactants on the voltammetric response and determination of an antihypertensive drug

The effect of adding surface-active agents to electrolytes containing terazosin, an antihypertensive drug, on the voltammetric response of glassy carbon electrode was studied. The current signal due to the oxidation process was a function of the amount of terazosin, pH of the medium, type of surfactant, and accumulation time at the electrode surface. Two surfactants were used, an anionic type, sodium dodecyl sulfate (SDS) and a cationic type, cetyl trimethyl ammonium bromide (CTAB). Addition of SDS to the terazosin-containing electrolyte was found to enhance the oxidation current signal while CTAB showed an opposite effect. Beside the interfacial interaction of the surfactant with the electrode surface in reference to the bias applied potential and the charge of surfactant, terazosin-surfactant interaction in the electrolytic solution was found to be critical to the magnitude of current signal. Addition of SDS to terazosin-containing buffer solution resulted in a decrease in the drug absorption spectrum both in the ultra-violet and visible (UV-vis) regions. Moreover, NMR measurements showed considerable chemical shifts for the aromatic protons of the quinazolinyl moiety of the terazosin in presence of SDS. The affected aromatic protons are positioned next to the interacting protonated amino-group of the terazosin with the charged sulfonate-group of SDS. On the other hand, addition of CTAB did not cause noticeable changes both to the UV-vis and NMR spectra of the drug. The use of SDS in the electrochemical determination of terazosin using linear sweep voltammetry and differential pulse voltammetry at solid glassy carbon electrode enhanced the detection limit from 6.00 × 10⁻⁷ mol L⁻¹ in absence of surfactant to 4.58 × 10⁻⁹ mol L⁻¹ when present. The validity of using this method in the determination of drug active ingredient in urine samples and tablet formulations was also demonstrated.     

Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

Study of the Retention Behavior of Newly Synthesized s-Triazine Derivatives in RP TLC Systems,and the Lipophilicity of the Compounds

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic behavior of nine newly synthesized s-tri-azines has been studied by thin-layer chromatography on C18/UV254...     

Electrochemical synthesis, characterization and some properties of a polymer derived from thioflavin S

Polymeric films derived from thioflavin S were electrosynthesized on mild steel and silver electrodes in sulfuric acid and lithium perchlorate-containing aqueous solutions. The introduction of thioflavin S in an acidic solution protected the surface of steel from corrosion. The electrochemical behavior of the steel coated with a layer of poly(thioflavin) was examined by electrochemical impedance spectroscopy. The films exhibited a capacitive behavior and were semi-conductive in nature. Infra red reflectance measurements of the polymer films at the steel surface showed that the polymer structure retained the aromatic structure of the benzene and thiazole rings with the distinction of a nitrogen quinone vibrational band. Surface morphology of the polymer film was examined with scanning electron microscopy. The films are yellow, compact and dense when electrochemically formed onto steel surfaces when compared to a blue rather porous when formed onto silver electrode. The mechanism of electropolymerization of thioflavin is given and found similar to that of aniline with the possibility of metal chelation with the sulfur and/or nitrogen in the thiazole ring.     

Determination of diamine oxidase by a kinetic method with 2,2''-azino-di(3-ethylbenzthiazoline-6-sulfonate)

Hydrogen peroxide, the product of diamine oxidase-catalyzed putrescine or cadaverine oxidation, formed in proportion to the enzyme activity, is measured spectrophotometrically by using the above sulfonate (ABTS) and peroxidase. Only one reagent solution containing 3 mmol of putrescine or 10 mmol of cadaverine, 4 mmol of ABTS and 3000 U of peroxidase per litre of 0.2 mol l^-1 Tris—0.1 mol l^-1 HCl buffer pH 7.5 is needed. Absorbance changes are measured at 410 nm over the first 3 min of the reaction. This initial oxidation rate of the chromogen enables diamine oxidase activity up to 230 U l^-1 to be determined.     

Thermal analysis and kinetics of the copper-lead matte roasting process

In this paper, the results of copper-lead matte investigations are presented. Investigated copper-lead matte is intermediate product of the lead production in TREPCA-Zvečan. In the first part of the paper characterization of starting material is presented, consisting of: chemical composition analysis (XRQ), scanning electron microscopy (SEM) and diffractometry (XRD). Thermal properties of investigated matte were determined using differential thermal analysis (DTA) at characteristic temperatures. Using results of induced analysis, mechanism of matte oxidation process was determined. In the second part of the paper kinetic parameters describing oxidative roasting of copper-lead matte are presented. For activation energy calculations, non-isothermal methods defined by Kissinger and Ozawa were used [1, 2]. Kinetic equation describing oxidation process was determined using Sharps method of reduced half time of reaction [3].     

Spectrophotometric determination of ethanol by an enzymatic method with 2, 2'-azino-di(3-ethylbenzthiazo- line-6-sulfonate)

The method is based on the oxidation of ethanol in the presence of alcohol oxidase, followed by oxidation of 2,2'-azino-di(3-ethylbenzthiazoline-6-sulfonate) in the presence of peroxidase.     

Reversal of Regioselectivity of Nitrone Cycloadditions by Lewis Acids

The regio‐ and stereoselectivity of cycloadditions of the nitrone 1a and the chiral, sugar‐derived nitrones 13a and 13b with 3‐(prop‐2‐enoyl)‐1,3‐oxazolidin‐2‐one ( 2 ) depends on the nature of the Lewis acid catalyst used. Addition of Lewis acid reverses the regioselectivity of the cycloaddition, and improves the anti‐diastereoselectivity in the case of chiral nitrones. The sterically favored isoxazolidin‐5‐yl‐substituted adducts 3, 4 , and 14 – 17 are produced as the major products in the absence of Lewis acid, while the electronically favored regioisomers with isoxazolidin‐4‐yl substituents ( 5, 6 , and 18 – 21 , respectively) are obtained as major products in the [Ti(OⁱPr)₂Cl₂] catalyzed reactions. The reactions of nitrone 13b with 2 in the presence of other Lewis acids such as ZnCl₂, ZnBr₂, ZnI₂ and MgI₂/I₂ gave both regioisomeric pairs of the diastereoisomers, favoring the 4‐substituted congeners. The diastereoisomeric isoxazolidines 3a – 6a were reduced with NaBH₄ in THF/H₂O with subsequent desilylation to yield the separable diols 9 – 12 . Reduction of the diastereoisomeric isoxazolidines 19a and 18a afforded the chiral alcohols 23 and 22 , the latter of which was analyzed by X‐ray crystallography.     

The separation of some Bi- and tervalent cations on zirconium phosphate columns

Summary On small columns filled with the inorganic cation-exchanger zirconium phosphate, Zn²⁺-Cd²⁺ were quantitatively and Ni²⁺-Co²⁺ partly separated. The exchanger was in the NH₄+ form, and 0.5–4N NH₄Cl served as eluent. With the exchanger in the H+ form, U0₂ ²⁺ was separated from bivalent cations and ferric iron by stepwise elution with 0.1, 0.5 and 4N HCl solutions.

---

Zusammenfassung An kleinen Säulen des anorganischen Kationenaustauschers Zirkoniumphosphat wurden Zn²⁺ und Cd²⁺ quantitativ, Ni²⁺ und Co²⁺ teilweise getrennt. Der Austauscher lag in der NH₄+-Form vor, 0,5-bis 4-n Ammoniumchlorid diente als Eluent. Mit der H+-Form des Austauschers wurde UO₂ ²⁺ von zweiwertigen Kationen und von Fe³⁺ durch schrittweise Elution mit 0,1-, 0,5- und 4-n Salzsäure getrennt.

---

Résumé On a séparé Zn²⁺-Cd²⁺ quantitativement et Ni²⁺-Co²⁺ partiellement sur de petites colonnes remplies de phosphate de zirconium comme échangeur minéral cationique. L'échangeur se trouvait sous forme NH₄+ et l'on a pris NH₄Cl 0,5-4N comme éluant. Avec l'échangeur sous forme H⁺, on a séparé UO₂ ²⁺ des cations bivalents et de l'ion ferrique par élution graduelle avec des solutions chlorhydriques 0,1, 0,5 et 4N.