Synthesis,Electronic Properties and WOLED Devices of Planar Phosphorus‐Containing Polycyclic Aromatic Hydrocarbons

We describe the synthesis and the physical properties of polyaromatic hydrocarbons (PAHs) containing a phosphorus atom at the edge. In particular, the impact of the successive addition of aromatic rings on the electronic properties was investigated by experimental (UV/Vis absorption, fluorescence, cyclic voltammetry) and theoretical studies (DFT). The physical properties recorded in solution and in the solid state showed that the P‐containing PAHs exhibit properties expected for an emitter in white organic light‐emitting diodes (WOLEDs).     

The Calogero–Bogoyavlenskii–Schiff Equation in 2+1 Dimensions

We use the classical and nonclassical methods to obtain symmetry reductions and exact solutions of the (2+1)-dimensional integrable Calogero–Bogoyavlenskii–Schiff equation. Although this (2+1)-dimensional equation arises in a nonlocal form, it can be written as a system of differential equations and, in potential form, as a fourth-order partial differential equation. The classical and nonclassical methods yield some exact solutions of the (2+1)-dimensional equation that involve several arbitrary functions and hence exhibit a rich variety of qualitative behavior.     

Design and application of double amplified recirculating ring structure for hybrid fibre buses

The design of a double-parallel amplified recirculating optical delay line utilizing an erbium-doped fibre amplifier for a fibre optical bus is described. This structure is used for amplifying, equalizing and filtering multicarrier signals coming from optoelectronic units attached to fibre couplers. The use of this structure for a hybrid multimode-singlemode fibre bus that includes optoelectronic units for sensors is also demonstrated.     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Organophosphorus π-conjugated materials: the rise of a new field

The synthesis and electronic properties of new linear organic π-conjugated systems incorporating phosphole rings are described. Well defined α,α′-(phosphole-thiophene) oligomers possess low HOMO-LUMO gaps and their optical and electrochemical properties can be tuned via chemical modifications of the P-atoms. The physical properties of these compounds make them valuable materials for OLED’s. The coordination ability of phosphole-based dipoles has been exploited for the synthesis of efficient multipolar NLO-phores. Lastly, phospholes have been used for the synthesis of assemblies exhibiting through-bond interaction between two π-systems via P-P σ-skeletons.     

Line Intensities in the ν6Band of CH3F at 8.5 μm

Infrared absolute line intensities of the ν₆band of CH₃F have been measured around 8.5 μm using a diode-laser spectrometer. These line strengths were obtained by the equivalent width method and, for 13 lines, by fitting a Rautian profile to the measured shape of the lines. From these results, we have deduced the vibrational band strength to beS⁰_v= 9.66 ± 0.13 cm⁻²atm⁻¹at 296 K and the first Herman–Wallis factors.     

Metal phosphonates applied to biotechnologies: a novel approach to oligonucleotide microarrays

A new process for preparing oligonucleotide arrays is described that uses surface grafting chemistry which is fundamentally different from the electrostatic adsorption and organic covalent binding methods normally employed. Solid supports are modified with a mixed organic/inorganic zirconium phosphonate monolayer film providing a stable, well-defined interface. Oligonucleotide probes terminated with phosphate are spotted directly on to the zirconated surface forming a covalent linkage. Specific binding of terminal phosphate groups with minimal binding of the internal phosphate diesters has been demonstrated. The mixed organic/inorganic thin films have also been extended for use arraying DNA duplex probes, and therefore represent a viable general approach to DNA-based bioarrays. Ideas for interfacing mixed organic/inorganic interfaces to other bioapplications are also discussed.     

In vitro ageing and degradation of PEG-PLA diblock copolymer-based nanoparticles

Diblock copolymers composed of poly(oxy-ethylene) (POE) and poly(dl-lactic acid) segments were synthesized by anionic polymerization of d,l-lactide using the oxyanion formed by reaction of the monohydroxyl monomethoxy-poly(ethylene glycol) on sodium hydride. For comparison, a similar copolymer was prepared by using tin octoate to catalyze the lactide polymerization. The copolymers were used to make nanoparticles, which were stored at 4 °C. After a few months under these storage conditions, a dramatic decrease of the poly(ethylene glycol) content was observed, however, the mean diameter of the nanoparticles was not affected. The degradation of the nanoparticles was investigated in vitro under conditions selected to mimic physiological conditions. Changes of characteristics were monitored by ¹H NMR, SEC, DLLS and CZE on nanoparticles and/or on the degradation by-products dissolved in the ageing medium. According to their nanometric dimensions, the microparticles degraded very slowly and there was no difference in behaviour between the sodium hydride and the stannous octoate-derived copolymers.     

Evidence of steric factors in the fungitoxic mechanisms of 8-quinolinol and its 2-, 3-, 4-, 5-, 6-and 7-chloro and bromo analogues

Summary A study was made of the fungitoxicity of 2-, 3-, 4-, 5-, 6- and 7-chloro and bromo-8-quinolinols againstAspergillus niger,A. oryzae,Myrothecium verrucaria,Trichoderma viride andTrichophyton mentagrophytes in Sabouraud dextrose broth and in Yeast Nitrogen Base supplemented with 1%D-glucose and 0.088%L-asparagine. Based on the presence or absence of synergism between pairs of substituted 8-quinolinols and reversal or nonreversal of toxicity byL-cysteine or N-acetyl-L-cysteine, the following conclusions were reached: (1) substituents on the quinoline ring change the site(s) of action of the toxicant; (2) the sites of action of the 5-, 6-, and 7-chloro-8-quinolinols are different from each other and from 8-quinolinol and its 2-, 3-, and 4-chloro analogues, and the same is true for the corresponding bromo compounds; (3) 8-quinolinol and its 3- and 4-chloro and bromo analogues appear to share common sites of action; (4) for good antifungal activity the 2 position of the ring must not be substituted by sterically bulky groups; (5) the geometry of the binding sites of action are not so constrained that they cannot accommodate the analogously substituted chloro- and bromo-8-quinolinols.

---

Nachweis sterischer Faktoren bei der Fungitoxizität von 8-Chinolinol und seinen 2-, 3-, 4-, 5-, 6- und 7-Chlor- und -Brom-Analogen

Zusammenfassung Es wurde eine Studie der Fungitoxizität von 2-, 3-, 4-, 5-, 6- und 7-Chlor- und-Brom-8-chinolinol gegenüberAspergillus niger,A. oryzae,Myrothecium verrucaria,Trichoderma viride undTrichphyton mentagrophytes in Sabouraud Dextrose Nährmedium und in Hefe-N-Base mit 1%D-Glucose und 0.088%L-Asparagin unternommen. Auf der Basis des Zutreffens oder der Abwesenheit eines Synergismus zwischen Paaren von substituierten 8-Chinolinolen und der Umkehrung oder Nichtumkehrung der Toxizität durchL-Cystein oder N-Acetyl-L-cystein wurden folgende Schlußfolgerungen abgeleitet: (1) Substituenten am Chinolin-Ring ändern die Aktionsstelle(n) des Toxikans; (2) Die Angriffsstellen der 5-, 6- und 7-Chlor-8-chinolinole sind untereinander und von 8-Chinolinol und seinen 2-, 3- und 4-Chlor-Analogen verschieden, wobei das auch für die entsprechenden Brom-Verbindungen gilt; (3) 8-Chinolinol und seine 3- und 4-Chlor- und -Brom-Analogen scheinen gemeinsame Aktionsstellen zu teilen; (4) für eine gute antifungale Aktivität darf die 2-Position des Rings nicht mit sterisch anspruchsvollen Gruppen besetzt sein; (5) Die Geometrie des Bindungsstellen der Wirkung ist nicht so gespannt, daß nicht sowohl analoge Chlor- oder Brom-8-chinolinole Platz finden.

     

Sodium 5‐nitro‐2‐pyridonate trihydrate

The title compound, alternatively sodium pyridin‐2‐olate trihydrate, Na⁺·C₅H₃N₂O₃^?·3H₂O, crystallizes in the P space group. It is made up of edge‐shared chains of NaO₆ octahedra with five water mol­ecules and one 5‐nitro‐2‐pyridonate anion. Four of these water mol­ecules are bicoordinating, involved in connecting the adjacent octahedra, and the fifth is coordinated to only one octahedron. The crystal structure is stabilized by a network of strong O—H?O and O—H?N interactions. The organic moieties occupy the space between the chains with an antiparallel alignment.