(e, 3e) test on e-e correlations in helium

The angular variations of the five-fold differential cross section obtained by using different wave functions of helium are compared with experimental data. It is found that in the coplanar geometry two kinematical arrangements, (i) equal energy sharing between the two ejected electrons with one of them ejected along the momentum transfer direction and the other along varying direction and (ii) the Bethe ridge condition with fixed sum of ejected electron energies and varying angle between them, are very sensitive to e-e correlations contained in the target wave function. This comparison has been used to show that open-shell class of wave functions better incorporate e-e correlations than the closed-shell class.     

Quantitative evaluation of benzene, toluene, and xylene in the larvae of Drosophila melanogaster by solid-phase microextraction/gas chromatography/mass spectrometry for potential use in toxicological studies

A simple, rapid, and solvent-free method for quantitative determination of benzene, toluene, and Xylene in exposed Drosophila larvae was developed using headspace solid-phase microextraction (HS-SPME) coupled to GC/MS. Larvae fed on standard Drosophila food mixed with benzene, toluene, and Xylene for 48 h were homogenized in Milli-Q water. Extraction of benzene, toluene, and Xylene was performed at 65 degrees C for 30 min on the SPME fiber (silica-fused). Subsequently, the fiber was desorbed in the GC injection port, followed by GC/MS analysis in the selected-ion monitoring mode. An external calibration curve was used for the quantification of benzene, toluene, and Xylene in the exposed organism. Recoveries were in the range of 78-82% (intraday) and 76-81% (interday) in larvae, and 91-96% (intraday) and 87-92% (interday) in the diet. LOD with an S/N of 3:1 and LOQ with an S/N of 10:1 were in the range of 0.01-0.023 and 0.034-0.077 microg/L, respectively. Percent RSD values for benzene, toluene, and Xylene were in the range of 0.50-0.81 (intraday) and 0.89-1.23 (interday) for retention time, and 2.16--3.85 (intraday) and 2.99-4.95 (interday) for peak concentration, showing good repeatability. This method was sensitive enough to quantitate benzene, toluene, and Xylene in small exposed organisms like Drosophila larvae. The SPME/GC/MS method developed may have wider applications in various in vivo toxicological studies.     

Production of ROS by photosensitized anthracene under sunlight and UV-R at ambient environmental intensities

The aim of this study was to analyze the photostability and phototoxicity mechanism of anthracene (ANT) in a human skin epidermal cell line (HaCaT) at ambient environmental intensities of sunlight/UV‐R (UV‐A and UV‐B). Photomodification of ANT under sunlight/UV‐R exposure produced two photoproducts, anthrone and 9,10 anthracenedione. Generation of ¹O₂, O₂^?? and ^?OH was measured under UV‐R/sunlight exposure. Involvement of reactive oxygen species (ROS) was further substantiated by their quenching with free radical quenchers. Photodegradation of 2‐deoxyguanosine and linoleic acid peroxidation showed that ROS were mainly responsible for ANT phototoxicity. ANT generates significant amount of intracellular ROS in cell line. Maximum cell viability (85%) was reduced under sunlight exposure (30 min). Results of MTT assay accord NRU assay. ANT (0.01 μg mL^?1) induced cell‐cycle arrest at G1 phase. RT‐PCR demonstrated constitutive inducible mRNA expression of CYP 1A1 and 1B1 genes. Photosensitive ANT upregulates CYP 1A1 (2.2‐folds) and 1B1 (4.1‐folds) genes. Thus, the study suggests that ROS and DNA damage were mainly responsible for ANT phototoxicity. ANT exposure may be deleterious to human health at ambient environmental intensities reaching the earth’s surface through sunlight.     

Application of ethyl chloroformate derivatization for solid-phase microextraction–gas chromatography–mass spectrometric determination of bisphenol-A in water and milk samples

A simple and rapid analytical method based on in-matrix ethyl chloroformate (ECF) derivatization has been developed for the quantitative determination of bisphenol-A (BPA) in milk and water samples. The samples containing BPA were derivatised with ECF in the presence of pyridine for 20 s at room temperature, and the non-polar derivative thus formed was extracted using polydimethylsiloxane solid-phase microextraction (SPME) fibres with thicknesses of 100 μm followed by analysis using gas chromatography–mass spectrometry. Three alkyl chloroformates (methyl, ethyl and isobutyl chloroformate) were tested for optimum derivatisation yields, and ECF has been found to be optimum for the derivatisation of BPA. Several parameters such as amount of ECF, pyridine and reaction time as well as SPME parameters were studied and optimised in the present work. The limit of detection for BPA in milk and water samples was found to be 0.1 and 0.01 μg L⁻¹, respectively, with a signal-to-noise ratio of 3:1. The limit of quantitation for BPA in milk and water was found to be 0.38 and 0.052 μg L⁻¹, respectively, with a signal-to-noise ratio of 10:1. In conclusion, the method developed was found to be rapid, reliable and cost-effective in comparison to silylation and highly suitable for the routine analysis of BPA by various food and environmental laboratories.     

Theory of sheath in a collisional multi-component plasma

The aim of this brief report is to study the behaviour of sheath structure in a multi-component plasma with dust-neutral collisions. The plasma consists of electrons, ions, micron size negatively charged dust particles and neutrals. The sheath-edge potential and sheath width are calculated for collisionally dominated sheath. Comparison of collisionless and collisionally dominated sheath are made.     

Quantitative evaluation of 28 mineral elements by inductively coupled plasma/mass spectrometry and its application in source identification of Indian opium

An analytical method based on inductively coupled plasma/mass spectrometry (ICP/MS) was developed for the determination of 28 mineral elements (Cr, Mn, Co, Ni, Cu, Zn, Ga, Sr, Cd, Ag, Ba, Pb, Bi Y, La, Ce, Nd, Pr, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) in Indian opium samples. The detection limits were found to be in the range of 0.0008-0.45 ng/mL. The recoveries of spiked samples for each element were found to be in the range of 83-106%, with a precision of less than 9%. A total of 124 opium samples from India were analyzed for the distribution pattern of the 28 mineral elements. Quantitative elemental data were subjected to chemometric analysis in order to determine an optimal classifier to evaluate the source of Indian opium. The study indicated that mineral elements might not be the suitable discriminators for the discrimination of licit opium-growing divisions of India. However, the methodology developed and the analytical data on elemental profile may find important forensic application in discriminating Indian opium with that of licit and illicit opium originating from different geographical regions of world.     

Application of capillary zone electrophoresis in the separation and determination of the principal gum opium alkaloids

We describe the use of capillary zone electrophoresis (CZE) for the qualitative and quantitative determination of major alkaloids (i.e., thebaine, codeine, morphine, papavarine and narcotine) in gum opium involving the analysis of alkaloids without derivatization or purification. Three extractions with 2.5% w/v aqueous acetic acid quantitatively extracted major alkaloids. The separation was carried out by CZE using a 7:3 mixture of methanol and sodium acetate (100 mM, pH 3.1) at a potential of 15 kV, with UV detection at 224 nm. Spiking of pure reference alkaloid standards in the opium extract was used for peak identification. The influences of buffer composition, pH and voltage on the separation of alkaloids were studied. The detection limit of each alkaloid dissolved in methanol was found to be 850 ng/mL (morphine), 450 ng/mL (thebaine), 500 ng/mL (codeine), 550 ng/mL (papaverine), and 500 ng/mL (narcotine) at an injection pressure of 300 mbar (injection volume, 4 nL) with a signal-to-noise ratio of 3:1. The external standard method was used for the quantification of alkaloids. The calibration plot was based on linear regression analysis. The relative standard deviation (RSD) for peak area and migration time was in the range of 1.03-3.56% and 0.34-0.69%, respectively. Percentage compositions (g%) of opium alkaloids in five gum opium samples were found to be in the range of 14.45-15.95 (morphine), 2.0-3.45 (codeine), 1.32-2.73 (thebaine), 0.92-2.37 (papavarine), and 3.85-5.77 (narcotine). The method developed is suitable for the routine analysis of major gum opium alkaloids in samples of forensic importance.     

(e, 3e) Differential cross section of He (21 S) and He (23 S)

The angular distribution of the five-fold differential cross section for the electron impact double ionization of He (2¹ S) and He (2³ S) has been studied. The kinematical conditions for maxima/minima in the angular distribution for the two cases have been compared. The two-step process for the double ionization is found to contribute very little in the triplet case.     

Determination of t,t-muconic acid in urine samples using a molecular imprinted polymer combined with simultaneous ethyl chloroformate derivatization and pre-concentration by dispersive liquid–liquid microextraction

The present communication describes the preparation and evaluation of a molecularly imprinted polymer (MIP) as a solid-phase extraction (SPE) sorbent and simultaneous ethyl chloroformate (ECF) derivatization and pre-concentration by dispersive liquid–liquid microextraction (DLLME) for the analysis of t,t-muconic acid (t,t-MA) in urine samples using gas chromatography–mass spectrometry. The imprinting polymer was prepared using methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a cross-linker, 2,2-azobisisobutyronitrile as the initiator and t,t-MA as a template molecule. The imprinted polymer was evaluated for its use as a SPE sorbent by comparing both imprinted and non-imprinted polymers in terms of the recovery of t,t-MA from urine samples. Molecular modelling studies were performed in order to estimate the binding energy and efficiency of the MIP complex formed between the monomer and the t,t-MA. Various factors that can affect the extraction efficiency of MIP, such as the loading, washing and eluting conditions, were optimized; other factors that can affect the derivatization and DLLME pre-concentration were also optimized. MIP in combination with ECF derivatization and DLLME pre-concentration for t,t-MA exhibits good linearity, ranging from 0.125 to 2 μg?mL^?1 (R ²?=?0.9971), with limit of detection of 0.037 μg?mL^?1 and limit of quantification of 0.109 μg?mL^?1. Intra- and inter-day precision was found to be <6 %. The proposed method has been proven to be effective and sensitive for the selective pre-concentration and determination of t,t-MA in urine samples of cigarette smokers.

Microwave absorption studies of MgB2 superconductor

Microwave absorption studies have been carried out on MgB₂ superconductor using a standard X-band EPR spectrometer. The modulated low-field microwave absorption signals recorded for polycrystalline (grain size ∼ 10 μm) samples suggested the absence of weak-link character. The field dependent direct microwave absorption has been found to obey a ✓H dependence with two different slopes, which indicated a transition from strongly pinned lattice to flux flow regime.