An efficient method for the synthesis of quinoxaline derivatives catalyzed by titanium silicate-1

Research on Chemical Intermediates - A series of quinoxaline derivatives were efficiently synthesized by convenient and simple procedure in excellent yields using 1 wt.% of titanium silicate (TS-1)...     

An automated laboratory EXAFS spectrometer of Johansson type: indigenous development and testing

An automated linear laboratory EXAFS spectrometer of the Johansson type has been indigenously developed. Only two translational motions are required to achieve the necessary Rowland circle configuration for the (fixed) X-ray source, the dispersing and focusing bent crystal and the receiving slit. With the available crystals the spectral region from 5 to 25 keV can be scanned. The linear motions of the crystal and receiving slit including the detector assembly are achieved by employing software-controlled DC motors and utilizing optical encoders for position sensing. The appropriate rotation of the crystal is achieved by the geometry of the instrument. There is a facility to place the sample alternately in the path of the X-ray beam and out of the path to record both the incident X-ray intensityI ₀ and the transmitted intensityI employing the scintillation detector. An arrangement with a two-window proportional detector before the sample to measureI ₀ and the scintillation detector to recordI is also developed; in this case it is not necessary to oscillate the sample. Fast electronic circuits are employed to minimize counting errors. The instrument is user-friendly and it is operated through a menu-driven IBM compatible PC. EXAFS spectra of high resolution have been recorded using the spectrometer and employing the Si(111) reflecting planes; the X-ray source being a Rigaku 12 kW rotating anode with Cu target. We describe the spectrometer and discuss its performance with a few representative spectra.     

A bio-mechanical model for coupling cell contractility with focal adhesion formation

Focal adhesions (FAs) are large, multi-protein complexes that provide a mechanical link between the cytoskeletal contractile machinery and the extracellular matrix. They exhibit mechanosensitive properties; they self-assemble upon application of pulling forces and dissociate when these forces are decreased. We rationalize this mechano-sensitivity from thermodynamic considerations and develop a continuum framework in which the cytoskeletal contractile forces generated by stress fibers drive the assembly of the FA multi-protein complexes. The FA model has three essential features: (i) the low and high affinity integrins co-exist in thermodynamic equilibrium, (ii) the low affinity integrins within the plasma membrane are mobile, and (iii) the contractile forces generated by the stress fibers are in mechanical equilibrium and change the free energies of the integrins. A general two-dimensional framework is presented and the essential features of the model illustrated using one-dimensional examples. Consistent with observations, the coupled stress fiber and FA model predict that (a) the FAs concentrate around the periphery of the cell; (b) the fraction of the cell covered by FAs increases with decreasing cell size while the total FA intensity increases with increasing cell size; and (c) the FA intensity decreases substantially when cell contractility is curtailed.     

Free-radical polymerization of methyl methacrylate in presence of the Cr(C5H7O2)3–Al(i-C4H9)3 catalyst system

Polymerization of methyl methacrylate has been studied with the chromium acetylacetonate–triisobutyl aluminum catalyst system in benzene medium at 40°C. These studies have been carried out at an Al/Cr ratio of 12 to compare the behavior with the previously studied chromium acetyl acetonate–triethyl aluminum catalyst system. The enhanced yield and gelling of polymer suggests a free-radical mechanism of polymerization. Further, the kinetics of polymerization and the heterotactic structure of polymer as determined by NMR examination have led to confirmation of the freeradical mechanism of polymerization of methyl methacrylate by an excess of triisobutylaluminum in the presence of catalyst complex.     

A new three-carbon synthon for efficient synthesis of benzannelated and 1-(2-arylethenyl) heterocycles

The novel three-carbon synthon 1-(1H-1,2, 3-benzotriazol-1-yl)-3-chloroacetone for the synthesis of benzothiazoles, pyrido[1,2-a]indoles, and styryl-substituted indolizines and imidazo[1,2-a]pyridines is reported. The proposed routes are a general and efficient approach for heterocyclizations followed by benzannelations or attachment of arylethenyl pharmacophores.     

THE STRUCTURAL CHANGES IN BOVINE ROD OUTER SEGMENTS IN THE PRESENCE OF ATP

Abstract— We have, previously, described a light-induced near infrared (700–850 nm) light scattering transient obtained in the presence of ATP from bovine rod outer segments suspensions in which the plasma but not the disk membranes were perforated (Uhl et al ., 1979a). This transient was termed the 'A' signal. To elucidate its possible origin, we have analyzed their angular and wavelength dependencies. These data have been compared with osmotically controlled (non-light) induced light scattering changes from identical control rod outer segments suspensions. It has been found that A_D (the dark light scattering signal obtained in the presence of ATP) and A_LS (the slow component of the actinic flash induced light scattering signal, A_L) can be assigned to the swelling of the disk membranes while A_Lf (the fast component of this latter signal) can be attributed to the change in refractive index of the ROS caused by the hypsochromic spectral shift of photolyzed rhodopsin. The collective disk swelling associated with A, and A_LS is consistent with the pumping of ions into the disk lumen by the action of a disk membrane bound ATPase.     

Stabilization of p-block organoelement terminal hydroxides, thiols, and selenols requires newer synthetic strategies

Metal hydroxides represent a very interesting and highly useful class of compounds that have been known to chemists for a very long time. While alkali and alkaline earth metal hydroxides (s‐block) are commonplace chemicals in terms of their abundance and their use in a chemical laboratory as bases, the interest in Brønsted acidic molecular terminal hydroxides of p‐block elements, such as aluminum and silicon, has been of recent origin, with respect to the variety of applications these compounds can offer both in materials science and catalysis. Moreover, these systems are environmentally friendly, relative to the metal halides, owing to their ‐OH functionality (resembling that of water). Design and conceptualization of the corresponding terminal thiols, selenols, and tellurols (M? SH, M? SeH, and M? TeH) offer even more challenging problems to synthetic inorganic chemists. This concept summarizes some of the recent strategies developed to stabilize these otherwise very unstable species. The successful preparation of a number of silicon trihydroxides a few years back resulted in the generation of several model compounds for metal–silicates. The recent synthesis of unusual aluminum compounds such as RAl(OH)₂, RAl(SH)₂, and RAl(SeH)₂ with terminal EH (E=O, Se, or Se) groups is likely to change the ways in which some of the well‐known catalytic conversions are being carried out. The need for very flexible and innovative synthetic strategies to achieve these unusual compounds is emphasized in this concept.