Structural developments in synthetic rubbers during uniaxial deformation by in situ synchrotron X‐ray diffraction

The molecular orientation and strain‐induced crystallization of synthetic rubbers—polyisoprene rubber, polybutadiene rubber, and butyl rubber [poly(isobutylene isoprene)]—during uniaxial deformation were studied with in situ synchrotron wide‐angle X‐ray diffraction. The high intensity of the synchrotron X‐rays and the new data analysis method made it possible to estimate the mass fractions of the strain‐induced crystals and amorphous chain segments in both the oriented and unoriented states. Contrary to the conventional concept, the majority of the molecules (50–75%) remained in an unoriented amorphous state at high strains. Each synthetic rubber showed a different behavior of strain‐induced crystallization and molecular orientation during extension and retraction. Our results confirmed the occurence of strain‐induced networks in the synthetic rubbers due to the inhomogeneity of the crosslink distribution. The strain‐induced networks containing microfibrillar crystals and oriented amorphous tie chains were responsible for the ultimate mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 956–964, 2004     

Spurious Shell Closures in the Relativistic Mean Field Model

Following a previous systematic theoretical study of the ground-state properties of over 7000 nuclei from the proton drip line to the neutron drip line in the relativistic mean field model [Prog. Theor. Phys. 113 （2005） 785], which is in fair agreement with existing experimental data, we observe a few spurious shell closures, i.e. proton shell closures at Z = 58 and Z = 92. These spurious shell closures are found to persist in all the effective forces of the relativistic mean field model, e.g. TMA, NL3, PKDD and DD-ME2.     

RAPID AND SENSITIVE OPTICAL ROTATION MEASUREMENT: KINETICS OF CONFORMATIONAL CHANGE OF RHODOPSIN INTERMEDIATE

A rapid and sensitive optical rotation (OR) measurement system using laser light has been developed to meet the demands of flash-photolysis experiments. The optimal OR resolution of the apparatus is 0.3mdeg with 10 μs time constant with single shot. The OR resolution could be easily improved less than 0.1 mdeg with accumulation of data by a kinetic processor. Applications are briefly described for the study of transient conformational change of photochemical intermediates of octopus rhodopsin following a blue light flash.     

Synthesis and reactivities of 10-S-3 trithiadiazapentalene derivatives

1,3-Bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidinethiones 3a-f reacted with bromine to give trithiadiazapentalene derivatives 5a-f , bearing the exocyclic C-N double bonds, in moderate yields. The molecular structure of 5b was elucidated by the X-ray crystallographic analysis. The treatment of 5b-f with hydrochloric acid gave the ring-opening products, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazo-lidinones 9b-f , accompanied by the production of elemental sulfur. Reduction of 5b , 5d , and 5e with sodium borohydride gave the ring-opening compounds, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidines 13b , 13d , and 13e respectively.     

Anionic polymerization and copolymerization of S-methyl thiomethacrylate

S-Methyl thiomethacrylate (methyl thiolmethacrylate, MTMA) was polymerized with a variety of anionic initiators such as n-BuLi, octylpotassium, PhMgBr, and Et₂AlNPh₂ in toluene and THF. Stereoregularity of the polymer (PMTMA) was determined from the ¹H-NMR spectrum of poly(methyl methacrylate), which had been derived from PMTMA, because the α-methyl resonance in the ¹H-NMR spectrum of PMTMA was not satisfactorily solved owing to the overlap of pentad signals. The ¹³C-NMR spectrum of PMTMA also showed the splitting due to pentad sequences. Stereoregularity of PMTMA was always low compared with that of poly(methyl methacrylate), which was prepared under the same reaction conditions. MTMA was much more reactive than methyl methacrylate and methacrylonitrile in the copolymerization with n-BuLi in toluene and in THF at ?78°C. The lower stereoregulation of the polymerization of MTMA and the higher reactivity of MTMA were mainly ascribed to the higher resonance effect of MTMA.     

Synthesis of monodispersed organic-inorganic hybrid spheres

This paper describes the attempt to prepare a new group of monodispersed silica-polymer hybrid particles, which consists of silica and amide polymer: poly(vinylpyrrolidone) (PVP) and poly(2-ethyloxazoline) (POXZ). Preparation method is based on the growth of hybrid seeds by the addition of TEOS-polymer solution.Monodispersed PVP-silica hybrid particles of 1.24 µm in diameter were prepared by growing the hybrid seeds of 0.54 µm by the addition of TEOS-PVP solution with ammonia catalyst. In the case of POXZ-silica particles, addition of TEOS-POXZ solution to the solution containing 0.54 µm seeds resulted in monodispersed POXZ-silica hybrid particles and four times repetition of the addition for particle growth gave the hybrid particles of the diameter of 1.6 µm.Improvement of mechanical properties of hybrid particles was observed when the particles were heated at 100 200°C.     

Synthesis of (±)‐Kempa‐6,8‐dien‐3‐ol (=(2aRS,3SR,4aSR,7RS,7aSR,10bSR,10cSR)‐2,2a,3,4,4a,5,6,7,7a,8,10b,10c‐Dodecahydro‐2a,7,10,10c‐tetramethylnaphth[2,18‐cde]azulen‐3‐ol)

The synthesis of kempa‐6,8‐dien‐3β‐ol ( 4a ), as a synthetic leading model of the natural product 4b , was carried out starting from intermediate 12 , the synthetic route of which has been developed previously (Scheme 1). The conversion of 12 to the model compound 4a involved the elaboration of three structure modifications by three processes, Tasks A, B, and C (see Scheme 2). Task A was achieved by epoxy‐ring opening of 41 with Me₃SiCl (Scheme 9), and Task B being performed by oxidation at the 13‐position, followed by hydrogenation, and then epimerization (Schemes 4 and 5). The removal of the 2‐OH group from 12 (Task C) was achieved via 30b according to Scheme 6, whereby 30b was formed exclusively from 30a / 31a 1 : 1 (Scheme 7). In addition, some useful reactions from the synthetic viewpoint were developed during the course of the present experiments.