Flow-injection determination of 3-hdroxybutyrate in serum with an immobilized 3-hydroxybutyrate dehydrogenase reactor and chemiluminescence detection

A flow-injection system for the determination of 3-hydroxybutyrate in serum is described. 3-Hydroxybutyrate dehydrogenase is immobilized on poly(vinyl alcohol) beads and incorporated in a flow-injection system. 1-Methoxy-5-methylphenazinium methylsulphate reacts with enzymatically generated NADH to give H₂O₂, which is detected chemiluminometrically with the reaction of luminol and hexacynoferrate(III). Serum is diluted and filtered through an ultrafiltration membrane. The system responds linearly to injected samples (80 μl) in the concentration range 0.5–300 μM; the detection limit is 0.1 μM. The within-day relative standard deviation (n = 90) for 58 μM 3-hydroxybutyrate in serum is 0.8%. The maximum throughout is 20 samples per hour. The immobilized enzyme is stable for at least 1 month.     

Two novel aromatic glycosides,pueroside-A and -B,from puerariae radix

Two novel aromatic glycosides were obtained from Puerariae Radix and their chemical structures were characterized.     

Simplified high-performance liquid chromatographic determination of residual amprolium in edible chicken tissues

A simplified determining method for the routine monitoring of residual amprolium in edible chicken tissues (muscle and liver) is developed using a high-performance liquid chromatographic (HPLC) method with a photodiode-array detector after sample cleanup by an Ultrafree-MC/PL centrifugal ultrafiltration unit. For the HPLC determination and identification, a Mightysil RP4 GP column and a mobile phase of an ethanol-5 mM 1-heptanesulfonic acid sodium salt solution (35:65, v/v) using an ion-pairing system with a photodiode-array detector are used. Average recoveries (spiked at 0.3-3.0 microg/g) are > 90%. The inter- and intravariabilities are 1.9-2.4%. The limits of quantitation are 0.22 microg/g for muscle and 0.25 microg/g for liver. The total time and solvent required for the analysis of one sample are < 20 min and < 2 mL of ethanol, respectively. No toxic solvents and regents are used.     

Simplified high-performance liquid chromatographic determination of residual amprolium in edible chicken tissues

A simplified determining method for the routine monitoring of residual amprolium in edible chicken tissues (muscle and liver) is developed using a high-performance liquid chromatographic (HPLC) method with a photodiode-array detector after sample cleanup by an Ultrafree-MC/PL centrifugal ultrafiltration unit. For the HPLC determination and identification, a Mightysil RP-4 GP column and a mobile phase of an ethanol-5 mM 1-heptanesulfonic acid sodium salt solution (35:65, v/v) using an ion-pairing system with a photodiode-array detector are used. Average recoveries (spiked at 0.3-3.0 microg/g) are > 90%. The inter- and intravariabilities are 1.9-2.4%. The limits of quantitation are 0.22 microg/g for muscle and 0.25 microg/g for liver. The total time and solvent required for the analysis of one sample are < 20 min and < 2 mL of ethanol, respectively. No toxic solvents and regents are used.     

Flow-injection determination of 9,10-phenanthrenequinone with catalytic photometric detection

A catalytic photometric method with a flow-injection system is described for the determination of 9,10-phenanthrenequinone. It is based on the catalytic effect of 9,10-phenanthrenequinone on the redox reaction of 1,2-dinitrobenzene with formaldehyde under alkaline conditions. 9,10-Phenanthrenequinone at the 5.0 x 10(-8)-5.0 x 10(-6)M level can be determined at a rate of 20 samples/hr. The detection limit is 1.0 x 10(-8)M (40 pg in a 10-microl injection).     

Development of a high-performance liquid chromatographic system with enzyme reactors for the determination of N-acetyl branched-chain amino acids

Immobilized enzymes were used as column reactors in a high-performance liquid chromatographic system for the specific detection of N-acetyl branched-chain amino acids (AcBCAs) such as N- acetyl- l -valine (AcVal), N- acetyl- l -leucine (AcLeu) and N- acetyl- l -isoleucine (AcIle). Aminoacylase and leucine dehydrogenase were immobilized onto poly(vinyl alcohol) beads. The AcBCAs were separated as three peaks on a Capcell C(1) SG120 column with 0.03M phosphate buffer (pH 8.0). Aminoacylase was capable of hydrolysing the AcBCAs to amino acids, which react with beta-nicotinamide adenine dinucleotide (NAD(+)) in the presence of leucine dehydrogenase. The reduced nicotinamide adenine dinucleotide (NADH) produced was monitored fluorimetrically. The calibration graphs were linear from 4 to 200muM for AcVal and AcLeu, and from 5 to 300muM for AcIle; detection limits for AcVal, AcLeu and AcIle were 2, 2 and 3muM, respectively. The immobilized aminoacylase reactor should be renewed every 5 days owing to a poor stability of aminoacylase.     

Determination of aliphatic amino acids in serum by HPLC with fluorimetric detection using co-immobilized enzyme reactor

A simple and selective method is presented for the determination of aliphatic amino acids such as L-alanine, L-valine, L-isoleucine and L-leucine in serum using HPLC with detection by co-immobilized alanine dehydrogenase/leucine dehydrogenase post-column reactor and fluorimeter. The enzymes were simultaneously immobilized on chitosan beads. The separation was achieved by means of an ods column with elution with phosphate buffer (pH 7.0). The system gave linear responses over two orders of magnitude and detection limits at 1-2muM levels.     

Flow-injection determination of d-mannitol with immobilized mannitol dehydrogenase

A flow-injection system is described for the determination of d-mannitol. Mannitol dehydrogenase is immobilized on poly(vinyl alcohol) beads and packed in a column (5 cm × 4 mm i.d.). The NADH formed is detected fluorimetrically. The response is linear between 5 × 10^?7 and 1 × 10^?4 M mannitol and the detection limit is 1 × 10^?7 M. The throughput is 30 samples per hour. The reactor is stable for at least 8 weeks.     

CHOICE OF COATINGS FOR THE OPTICAL ELEMENTS IN THE IRRADIATION SYSTEM OF VACUUM-ULTRAVIOLET RADIATION ABOVE 50 nm

The spectral throughput of a vacuum-ultraviolet irradiation system at the SOR-RING facility was examined with various combinations of aluminum-and gold-coated optical elements in a 2.2-m modified Wadsworth monochromator. We found that the optimum was a combination of an aluminum-coated collimating mirror, concave grating, and plane deflecting mirror, and a combination of a gold-coated collimating mirror, concave grating and an aluminum-coated plane deflecting mirror in the wavelength regions 190-110 nm and 110-50 nm, respectively.     

Determination of some dithiocarbamates by catalytic thermometric titration

The determination of dithiocarbamates by catalytic thermometric titration is described. The dithiocarbamates can be determined in the range 0.5-20 mumole with relative errors of about 5%.