Synthesis and characterization of an epoxy based thermoset containing a fluorinated thermoplastic

A novel fluorinated thermoplastic (FT) was synthesized from diglycidyl ether of bisphenol A (DGEBA), and 3‐(trifluoromethyl)aniline. FT was found to be miscible with DGEBA as shown by the existence of a single glass transition temperature (T_g) within the whole composition range. On the basis of several experimental techniques, it was found that upon heating etherification reaction takes place between FT and DGEBA. A DGEBA‐aromatic diamine (4,4′‐methylenebis(3‐chloro 2,6‐diethylaniline) formulation was modified with the FT. The influence of FT on the epoxy‐amine kinetics was investigated. Both structural parameters, gelation, and vitrification, were found to be affected by etherification reaction between epoxy and hydroxyls groups belonging to FT. The presence of ether linkages induced system stoichiometry modification. In addition, the curing conditions influence on FT migration towards the surface was studied on samples prepared with 20 wt % of modifier. SEM–EDX analysis confirmed that modified systems exhibits notable fluorine enrichment within the uppermost 200 μm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2781–2792, 2007     

Improving the water resistance of epoxy–anhydride matrices by the incorporation of bentonite

Epoxy–anhydride‐based polymers are commonly used as a matrix in pipeline systems exposed to water during their in‐service life. Water absorption at moderate temperatures and/or at long exposure times could lead to irreversible hydrolysis reaction decreasing considerably the polymer overall performance. A strategy to enhance the barrier properties of epoxy resins is to add nanofillers to traditional matrices. In this work, we added bentonite and chemically modified bentonite to this purpose. Water absorption of the resulting materials at three different temperatures (22°C, 80°C, and 93°C) was studied, and simultaneously, the evolution during the immersion tests of glass transition temperature and flexural modulus was recorded. Long‐term gravimetric results showed that composites with chemically modified bentonite produce a delay on the hydrolysis of epoxy–anhydride matrix, which is a relevant result, because of the tough application and uses of the system, from the technological point of view. Copyright © 2016 John Wiley & Sons, Ltd.     

Determining concentration depth profiles in fluorinated networks by means of electric force microscopy

By means of electric force microscopy, composition depth profiles were measured with nanometric resolution for a series of fluorinated networks. By mapping the dielectric permittivity along a line going from the surface to the bulk, we were able to experimentally access to the fluorine concentration profile. Obtained data show composition gradient lengths ranging from 30 nm to 80 nm in the near surface area for samples containing from 0.5 to 5 wt. % F, respectively. In contrast, no gradients of concentration were detected in bulk. This method has several advantages over other techniques because it allows profiling directly on a sectional cut of the sample. By combining the obtained results with x-ray photoelectron spectroscopy measurements, we were also able to quantify F/C ratio as a function of depth with nanoscale resolution.     

Ueber die Untersuchung von Drogen und den daraus hergestellten K?rpern

Ohne Zusammenfassung     

The use of load separation criterion and normalization method in ductile fracture characterization of thermoplastic polymers

Load separation is the theoretical basis for the single-specimen J-integral experiment and the incremental calculation of J-integral crack growth resistance (J-R) curves. This criterion has been experimentally studied in nongrowing crack records in several materials, and more recently a new method to extend the applicability to growing crack experiments has been proposed in testing steel. This article examines the applicability of the load separation criterion for evaluating ductile fracture mechanics parameters in rubber-modified polystyrenes and thermally treated polypropylene in the bending configuration. This criterion allows the load to be represented as the multiplication of two independent functions: a material deformation function and a crack geometry function. Its validity is evaluated with both stationary and growing crack experiments. η-factor calculation for smooth and side-grooved specimens was also tried using the simple method of Sharobeam and Landes, in order to identify material dependency. This article also investigates the applicability of the normalization method, based on the load separation criterion for evaluating J-R curves on PP and PS. A simple approach which combines a blunt notched and a precracked specimen experiment is proposed to determine the J-R curve of the materials studied. The resulting J-R curves are compared with multiple specimen results available in the literature for these materials. A good agreement between the J-R curves obtained from this simple method and from the multiple specimen technique was found. © 1996 John Wiley & Sons, Inc.     

HARVESTING ECONOMIC MODELS AND CATCH‐TO‐BIOMASS DEPENDENCE: THE CASE OF SMALL PELAGIC FISH

Abstract In the case of small pelagic fish, it seems reasonable to consider harvest functions depending nonlinearly on fishing effort and fish stock. Indeed, empirical evidence about these fish species suggests that marginal catch does not necessarily react in a linear way neither to changes in fishing effort nor in fish stock levels. This is in contradiction with traditional fishery economic models where catch‐to‐input marginal productivities are normally assumed to be constant. While allowing for nonlinearities in both catch‐to‐effort and catch‐to‐stock parameters, this paper extends the traditional single‐stock harvesting economic model by focusing on the dependence of the stationary solutions upon the nonlinear catch‐to‐stock parameter. Thus, we analyze equilibrium responses to changes in this parameter, which in turn may be triggered either by climatic or technological change. Given the focus in this study on the case of small pelagic fish, the analysis considers positive but small values for the catch‐to‐stock parameter.