Photometrische Bestimmung von Zinn in zinnorganischen Verbindungen mit 3′-Pyridylfluoron

3′-Pyridylfluorone is used for the photometric determination of tin in organic tin compounds after decomposition with conc. sulphuric acid and hydrogen peroxide. The high accuracy of this method allows elemental analysis. With concentrations of 10–70% the absolute error was + 0.14 to ?0.06%.     

Biosensor employing screen‐printed PEDOT:PSS for sensitive detection of phenolic compounds in water

Poly(3,4‐ethylenedioxythiophene) (PEDOT) and its derivatives are relatively new, and unique members of conducting‐polymers family. In this article, we present an approach for simple, reliable and cost‐efficient electrochemical biosensor for real‐time detection and quantification of phenolic compounds (PhCs). The PEDOT:poly(styrene sulfonate) (PSS) polymer, directly screen‐printed on the surface of the working electrode, was shown to act as an effective electrical conductor but also as an efficient redox mediator. It has also been found suitable for the reduction of quinone ions at low reducing potentials, close to 0 V versus Ag/AgCl, thus minimizing interferences due to other electroactive species present in real samples. Based on these properties, a biosensor based on tyrosinase immobilized on PEDOT:PSS‐modified electrodes was developed allowing the detection of PhCs in surface waters. The biosensor displayed very good performance in terms of sensitivity, detection limit and linear range. Assays using surface water previously spiked with bisphenol A showed that the biosensor was able to detect PhCs in real conditions with no matrix effect. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Grafting of molecularly imprinted polymer to porous polyethylene filtration membranes by plasma polymerization

An application of plasma-induced grafting of polyethylene membranes with a thin layer of molecularly imprinted polymer (MIP) was presented. High-density polyethylene (HDPE) membranes, “Vyon,” were used as a substrate for plasma grafting modification. The herbicide atrazine, one of the most popular targets of the molecular imprinting, was chosen as a template. The parameters of the plasma treatment were optimized in order to achieve a good balance between polymerization and ablation processes. Modified HDPE membranes were characterized, and the presence of the grafted polymeric layer was confirmed based on the observed weight gain, pore size measurements, and infrared spectrometry. Since there was no significant change in the porosity of the modified membranes, it was assumed that only a thin layer of the polymer was introduced on the surface. The experiments on the re-binding of the template atrazine to the membranes modified with MIP and blank polymers were performed. HDPE membranes which were grafted with polymer using continuous plasma polymerization demonstrated the best result which was expressed in an imprinted factor equal to 3, suggesting that molecular imprinting was successfully achieved.

Molecular diodes and ultra-thin organic rectifying junctions: Au-S-CnH2n-Q3CNQ and TCNQ derivatives

Attempts to obtain derivatives of the molecular diode, 2-{4-[1-cyano-2-(1-(omega-acetylsulfanylalkyl)-1H-quinolin-4-ylidene)-ethylidene]-cyclohexa-2,5-dienylidene}-malonitrile [1, CH(3)CO-S-C(n)H(2n)-Q3CNQ], from either 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-p-quinodimethane (TCNQF(4)) or 2,3,5,6-tetramethyl-7,7,8,8-tetracyano-p-quinodimethane (TMTCNQ) result in ring closure via the cyano group of the pi-bridge and yield di-substituted analogues: 2-{2,3,5,6-tetrafluoro-4-[6-(10-acetylsulfanyldecyl)-3-(1-(10-acetylsulfanyldecyl)-1H-quinolin-4-ylidenemethyl)-6H-benzo[f][1,7]naphthyridin-2-ylidene]-cyclohexa-2,5-dienylidene}-malonitrile (2a) and the 2,3,5,6-tetramethyl derivative (2b). Self-assembled monolayers (SAMs) of these donor-(pi-bridge)-acceptor molecular diodes exhibit asymmetric current-voltage characteristics with electron flow at forward bias from the top contact to surface C(CN)(2) groups. Comparison is made with I-V curves from ultra-thin films of an organic rectifying junction in which TCNQ(-) is electron-donating and a donor-(sigma-bridge)-acceptor diode in which TCNQ degrees is electron-accepting.     

Molecular imprinting solid phase extraction for selective detection of methidathion in olive oil

A specific adsorbent for extraction of methidathion from olive oil was developed. The design of the molecularly imprinted polymer (MIP) was based on the results of the computational screening of the library of polymerisable functional monomers. MIP was prepared by thermal polymerisation using N,N’-methylene bisacrylamide (MBAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. The polymers based on the itaconic acid (IA), methacrylic acid (MAA) and 2-(trifluoromethyl)acryl acid (TFMAA) functional monomers and one control polymer which was made without functional monomers with cross-linker EGDMA were also synthesised and tested. The performance of each polymer was compared using corresponding imprinting factor. As it was predicted by molecular modelling the best results were obtained for the MIP prepared with MBAA. The obtained MIP was optimised in solid-phase extraction coupled with high performance liquid chromatography (MISPE-HPLC-UV) and tested for the rapid screening of methidathion in olive oil. The proposed method allowed the efficient extraction of methidathion for concentrations ranging from 0.1 to 9 mg L⁻¹ (r² = 0.996). The limits of detection (LOD) and quantification (LOQ) in olive oil were 0.02 mg L⁻¹ and 0.1 mg L⁻¹, respectively. MIPs extraction was much more effective than traditional C18 reverse-phase solid phase extraction.     

Tailoring the electroactive area of carbon screen-printed electrodes by simple activation steps towards rutin determination

Journal of Solid State Electrochemistry - Screen-printed electrodes (SPEs) have the advantage of being considered electrochemical cells that can be implemented in portable sensor applications. With...