Rational materials design of sorbent coatings for explosives: applications with chemical sensors

A series of chemoselective polymers had been designed and synthesized to enhance the sorption properties of polymer coated chemical sensors for polynitroaromatic analytes. To evaluate the effectiveness of the chemoselective coatings, a polynitroaromatic vapor test bed was utilized to challenge polymer coated surface acoustic wave (SAW) devices with different explosive vapors. Dinitrotoluene detection limits were determined to be in the <100 parts per trillion ranges. ATR-FTIR studies were used to determine the nature of the polymer-polynitroaromatic analyte interactions, and confirm the presence of hydrogen-bonding between polymer pendant groups and the nitro functional groups of polynitroaromatic explosive materials.     

Collocation Methods for Weakly Singular Second-kind Volterra Integral Equations with Non-smooth Solution

Collocation type methods are studied for the numerical solutionof the weakly singular Volterra integral equation of the secondkind: where the solution (t) is assumedto have the form f(t) = x(t)+r^?(t), x and being sufficientlysmooth. The solution is approximated near zero by a linear combinationof powers of t?, and away from zero by the usual polynomialrepresentation. Convergence is proved and many numerical experimentsare carried out with examples from the literature. A comparisonis made with a method of Brunner & Norsett (1981), originallydeveloped for (1) with a smooth solution. Special attentionis paid to the numerical approximation of the so-called momentintegrals which emerge in the collocation scheme.     

无机酸洗脱对胜利褐煤微晶结构及其自燃倾向性的影响

利用XRD、Raman、XPS和FT-IR表征技术,研究无机酸洗脱(HCl、H2SO4、HCl-HF)处理的胜利褐煤微晶结构的变化,采用自行设计的表面吸附仪-GC联用装置,对样品进行不同温度的低温脉冲氧化实验,考察了煤样在不同温度下氧吸附量的变化规律,通过低温脉冲氧吸附规律与TG/DTG和固定床燃烧实验关联,考察了煤样的自燃倾向。结果表明,无机酸洗脱对矿物质的脱除使得煤结构的有序度增加,石墨化程度提高,无机酸洗脱煤样与原煤相比吸氧量明显下降。随着吸附温度的升高,各煤样吸氧量明显增加,且随着脱除矿物质程度的增加,吸氧量呈减小的趋势,导致自燃倾向降低。     

An approximate treatment of scattering based on the delta boundary operator

The development of a scheme to treat two-dimensional electromagneticscattering by electrically large, perfectly conducting bodiesis described. It incorporates the effects of surface curvatureand non-local phenomena and has the potential to provide thebasis for a general technique yielding more accurate predictionsthan the widely used physical optics method.     

Detection of methyl salicylate using polymer-filled chemicapacitors

Methyl salicylate (MeS) is used as a chemical warfare agent simulant to test chemical protective garments and other individual personal protective gear. The accurate and real-time detection of this analyte is advantageous for various testing regimes. This paper reports the results of MeS vapor exposures on polymer-filled capacitance-based sensors at temperatures ranging from 15 °C to 50 °C under dry and humid conditions. Multiple capacitors were arranged in an array on a silicon chip each having a different sorptive polymer. The sensors used parallel-plate electrode geometry to measure the dielectric permittivity changes of each polymer when exposed to water and MeS vapor. Of the four polymers tested against MeS, the optimal polymer displayed near or sub-parts-per-million detection limits at 35 °C (0–80%RH).     

Materials for capacitive carbon dioxide microsensors capable of operating at ambient temperatures

The responses of alkylamine functionalized organic bridged polysilsesquioxanes on chemicapacitive sensors to carbon dioxide (CO₂) are described operating at temperatures ranging from 15 to 50°C. These hybrid organic–inorganic network materials were synthesized by the sol–gel polymerization of a mixture of a matrix monomer and functional monomer at various ratios followed by aging and ink-jet deposition of the sol on each capacitive sensor. During exposure of the sensor to known concentrations of analyte, the material’s capacitance was measured. From these changes in capacitance, detection limits ranging from 40 to 100 ppm were calculated. Furthermore, a correlation was observed with increasing length of the alkyl chain in the amine monomer correlating with an increase in CO₂ sensitivity and a decrease in water sensitivity. These materials offer a new method for CO₂ detection for building control systems or other low-power applications using low operating temperatures.     

A novel method for the preconcentration and determination of ampicillin using electromembrane microextraction followed by high‐performance liquid chromatography

Electromembrane extraction was used with high‐performance liquid chromatography for preconcentration and determination of ampicillin residues in cow milk. Ampicillin is transferred from an aqueous solution through a thin layer containing octan‐1‐ol, silver nanoparticles, and reduced graphene oxide which serves as a supported liquid membrane. Inside the fiber impregnated with supported liquid membrane mixture was filled 10 µL of an acceptor phase. Experimental parameters were optimized for extraction efficiency of ampicillin. Under the optimized conditions, the proposed method provided acceptable linear range (2–100 µg/L), satisfactory repeatability (RSD% < 7.1), low limit of detection (0.6 µg/L), and a high enrichment factor (295) corresponding to extraction recovery of 37%. Consequently, the proposed method was successfully applied for the determination of ampicillin residues in different cow milks.     

Synthesis and Chemistry of Novel Perhalogenated Imines,Oxaziridines, and Oxazolidines

Imines have been prepared using three different methods. The thermal addition of tetrafluoroethylene to N‐bromoperhalo‐1‐alkanimines (R_fCF=NBr) to give imines of the type R_fCF=NCF₂CF₂Br, the Lewis acid cleavage of perfluorinated amines to give imines of the type R_fN=CFR_f′ and the one pot reaction between hexafluoroacetone and perfluoroamides. Reactions of these imines with m‐chloroperoxy benzoic acid (MCPBA) lead to the corresponding cis‐perfluoro‐2, 3‐dialkyloxaziridines R_f R_F′. The oxaziridines undergo cycloadditions with olefins to give the corresponding oxazolidines. A preliminary investigation was done on the synthesis and reaction chemistry of complex formed between activated zinc and the 4‐iodo and 4‐bromo‐perhalooxazolidines.     

The electron energy loss spectrum of LiF in the band gap region

The eels of LiF has been measured in the range 0–18 eV with primary beam energies 50 eV and 1.5 keV. Four peaks are clearly resolved in the band gap region at room temperature. The amplitude of the three lower energy loss peaks was found to depend on beam exposure and temperature. It is concluded that the lowest energy peak arises at a beam induced defect, that the next two peaks arise in lithium metal liberated by the electron beam and that the peak nearest to the band edge is due to an intrinsic surface excitation.