Determination of trace moisture in hydrogen chloride gas by Karl Fischer titration

Moisture of several ppm in hydrogen chloride gas has been accurately determined by a new method using the Karl Fischer reagent, which hitherto had a limitation in accuracy because of a partial reaction with hydrogen chloride when direct titration was employed.The moisture in the sample gas was collected in a cold trap kept at about ?80 °C while the hydrogen chloride gas passed through and the frozen moisture was dissolved by pyridine-methanol (1:1) solvent. a KF Reagent of factoe: 0.35 mg H₂O/ml.Titration by the Karl Fischer reagent having the equivalency factor of, e.g., 0.5 mg H₂O/ml was carried out and the concentration of the moisture was calculated from the sample volume used.     

Making the liquid-phase catalytic hydrodechlorination of pce over Pd/C safer

Summary The hydrodechlorination of tetrachloroethylene in methanol (MeOH) over palladium catalysts on activated carbon (Pd/C) at 20°C and atmospheric pressure was rendered safer by using ethanol (EtOH), isopropanol (IPA) or water-alcohol mixtures as solvents. Adding water to MeOH was better than using EtOH or IPA since it resulted in a faster reaction and better stability of Pd/C, which could also be completely reactivated.     

Efficient regioselective aldol condensation of methyl ketones promoted by organoaluminum compounds,and its application to muscone synthesis

Regioselective aldol condensation of 2-octanone and 2-butanone at the methyl side proceeded in high yields using a system of dialkylaluminum phenoxide/tertiary amine. The intramolecular aldol condensation of 2,15-hexadecanedione was carried out by the same system, especially di-i-butylaluminum phenoxide/pyridine, to give dehydromuscone in 65% yield. Its hydrogenation afforded muscone (3-methylcyclopentadecanone).     

Radiation-induced degradation of aqueous 2–chlorophenol assisted by zeolites

Journal of Radioanalytical and Nuclear Chemistry - This study aims to demonstrate that zeolite has the potential to increase the efficiency of radiolysis treatment of aqueous organic pollutants by...     

Thiol Modified Chitosan Self-Assembled Monolayer Platform for Nucleic Acid Biosensor

A self-assembled monolayer (SAM) of thiol modified chitosan (SH-CHIT), with thioglycolic acid (TGA) as a modifier to bestow thiol groups, has been prepared onto gold (Au)-coated glass plates for fabrication of the nucleic acid biosensor. The chemical modification of CHIT via TGA has been evidenced by Fourier transform infrared spectroscopy (FT-IR) studies, and the biocompatibility studies reveal that CHIT retains its biocompatible nature after chemical modification. The electrochemical studies conducted onto SH-CHIT/Au electrode reveal that thiol modification in CHIT amino end enhances the electrochemical behavior indicating that it may be attributed to delocalization of electrons in CHIT skeleton that participates in the resonance process. The carboxyl group modified end of DNA probe has been immobilized onto SH-CHIT/Au electrode using N-ethyl-N′-(3-dimethylaminopropyl)carbodimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for detection of complementary, one-base mismatch and non-complementary sequence using electrochemical and optical studies for Mycobacterium tuberculosis detection. It has been found that DNA-SH-CHIT/Au bioelectrode can specifically detect 0.01 μM of target DNA concentration with sensitivity of 1.69?×?10^?6 A μM^?1.     

Degradation of hydroxymaleimide in 2-propanol by irradiation of energetic heavy ions (II)—N2-saturated system

Hydroxymaleimide was irradiated in N₂-saturated 2-propanol solutions by high-energy heavy ions over a wide range of LET values. The differential G-values of the degradation of hydroxymaleimide by irradiation with the heavier ions were lower than those of the lighter ions for the same LET value. An opposite result obtained in the air-saturated system. The degradation efficiency was 1.5 times higher, when the dose rate was 1/10 times lower. When irradiated at an LET value lower than 8 eV/nm, the G-values converged to a value less than that obtained by γ-irradiation.     

Electrostatic energies stored in dipolar films and analysis of decaying process of a large surface potential of Alq3 films

The decaying process of a large surface potential of as-deposited Alq₃ film was analyzed with consideration of electrostatic energies stored in the film. The analysis includes the cooperative molecular field effect and it shows that the derived equilibrium condition of dipolar films with electron traps supports the concept of the alignment of Fermi-level of metal and surface Fermi-level of dipolar films. The potential decay of Alq₃ films on Al electrodes by photo-exposure is explained due to detrapping of trapped electrons that are immediately transported to the injected electrodes along with the disordering of polar structure of Alq₃ films.     

Electric quadrupole model on the formation of molecular chirality dependent domain shapes of lipid monolayers at the air-water interface

Shapes and orientational deformation of a lipid monolayer domain have been analyzed taking into account the surface pressure, line tension, and electrostatic energy due to the spontaneous polarization and electric quadrupole density generated from the domain. The electrostatic energy due to the generation of spontaneous polarization and electric quadrupole density contributes to the formation of orientational deformation as the Frank elastic energy and spontaneous splay, respectively. Since the orientational configuration of the electric quadrupole density and in-plane spontaneous polarization is dependent on the molecular chirality, and the positive splay deformation of electric quadrupole density is induced by the spontaneous splay, the bending direction of in-plane spontaneous polarization depends on the chirality of constituent lipids. The electrostatic energy due to the in-plane spontaneous polarization is dependent on the orientational deformation of in-plane spontaneous polarization, and bends the domain shape towards the bending direction of the in-plane spontaneous polarization. It has been demonstrated that the chiral dependence of the domain shapes of lipid monolayers originated from the chiral dependence of orientational structure due to the electric quadrupole density.     

Transient absorption measurement system using pulsed energetic ion

This article reports a highly sensitive transient absorbance measurement system using pulsed energetic ions. The ions were pulsed by a beam chopper, which was synchronized with the cyclotron, and accelerated to the desired energy around 18 MeV/u. H, He, C and Ne ions can be used for the transient absorption measurement. The optical system can measure an absorbance smaller than 1.0×10⁻⁴ in the wavelength range of 400–740 nm.     

Pulse radiolysis study of ion-species effects on the solvated electron in alkylammonium ionic liquids

The spectra and kinetic behavior of solvated electrons (e_sol⁻) in alkyl ammonium ionic liquids (ILs), i.e. N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide (DEMMA-TFSI), N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEMMA-BF₄), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI), N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13-TFSI), N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P13-TFSI), and N-methyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P14-TFSI) were investigated by the pulse radiolysis method. The e_sol⁻ in each of the ammonium ILs has an absorption peak at 1100 nm, with molar absorption coefficients of 1.5–2.3×10⁴ dm³ mol⁻¹ cm⁻¹. The e_sol⁻ decayed by first order with a rate constant of 1.4–6.4×10⁶ s⁻¹. The reaction rate constant of the solvated electron with pyrene (Py) was 1.5–3.5×10⁸ dm³ mol⁻¹ s⁻¹ in the various ILs. These values were about one order of magnitude higher than the diffusion-controlled limits calculated from measured viscosities. The radiolytic yields (G-value) of the e_sol⁻ were 0.8–1.7×10⁻⁷ mol J⁻¹. The formation rate constant of e_sol⁻ in DEMMA-TFSI was 3.9×10¹⁰ s⁻¹. The dry electron (e_dry⁻) in DEMMA-TFSI reacts with Py with a rate constant of 7.9×10¹¹ dm³ mol⁻¹ s⁻¹, three orders of magnitude higher than that of the e_sol⁻ reactions. The G-value of the e_sol⁻ in the picosecond time region is 1.2×10⁻⁷ mol J⁻¹. The capture of e_dry⁻ by scavengers was found to be very fast in ILs.