Electrochemical oxidation of ethyl 3-oxo-3-phenyl-2-phenylhydrazonopropionate

The electrochemical oxidation of ethyl 3-oxo-3-phenyl-2-phenylhydrazonopropionate has been studied in the pH range 3.0–11.0 at a pyrolytic graphite electrode by linear and cyclic sweep voltammetry, coulometry and spectral studies. The results indicate that the 2 e⁻, 2 H⁺ oxidation of this compound gives phenol and ethyl 3-phenyl-2,3-dioxopropionate as the major products of electrooxidation.     

Isoperthiocyanic acid (3-amino-5-thione-l, 2, 4-dithiazole) as a new reagent for the selective detection of nitrite ion

Summary A new, simple, and selective test is described for the detection of nitrite ion with isoperthiocyanic acid (I) as the reagent. The test is based on the reaction of a 5% solution ofI with the nitrite ion solution, a deep orange precipitate being formed. Conversely, the test can be used in the identification ofI itself. Presumably, the coloured product is 3-hydroxy-5-thione-1, 2, 4-dithiazole, formed by the action of nitrous acid (producedin situ by the action of sulphuric acid and nitrite) on the 3-amino group ofI. The limit of detection is 300g of NO₂ ^– in a drop (0.05 ml). Most anions (including IO₃ ^–) do not interfere. Only I^–, thiourea, and hydrogen peroxide interfere; S₂O₃ ^2– interferes only when present in large amounts.

---

Zusammenfassung Ein neuer, einfacher und selektiver Nachweis von Nitrit mit Isoperthio cyansäure (I) wurde beschrieben. Er beruht auf der Umsetzung einer 5% igen Lösung von I mit Nitritlösung, wobei ein tief orange gefärbter Niederschlag entsteht. Umgekehrt kann die Reaktion auch zum Nachweis von I dienen. Vermutlich handelt es sich bei dem gefarbten Produkt um 3-Hydroxy-5-thion-1, 2, 4-dithiazol, das durch Einwirkung der salpetrigen Säure auf die 3-Aminogruppe von I entsteht. Die Erfassungsgrenze betragt 300g NO₂ ^–im Tropfen (0,05 ml). Die meisten Anionen (inklusive JO₃ ^–) stören nicht. Nur J^–, Thioharnstoff und H₂O₂ stören; Thiosulfat stört nur in großen Mengen.

     

Thermodynamic and kinetic data for adduct formation, cis-trans isomerization and redox reactions of ML4 complexes: a case study with rhodium- and iridium-tropp complexes in d8, d9 and d10 valence electron configurations (tropp=dibenzotropylidene phosphanes)

The formation of adducts of the square-planar 16-electron complexes trans-[M(tropp(ph))(2)](+) and cis-[M(tropp(ph))(2)](+) (M=Rh, Ir; tropp(Ph)=5-diphenylphosphanyldibenzo[a,d]cycloheptene) with acetonitrile (acn) and Cl(-), and the redox chemistry of these complexes was investigated by various physical methods (NMR and UV-visible spectroscopy, square-wave voltammetry), in order to obtain some fundamental thermodynamic and kinetic data for these systems. A trans/cis isomerization cannot be detected for [M(tropp(ph))(2)](+) in non-coordinating solvents. However, both isomers are connected through equilibria of the type trans-[M(tropp(ph))(2)](+)+L<==>[ML(tropp(ph))(2)](n)<==>cis-[M(tropp(ph))(2)](+)+L, involving five-coordinate intermediates [ML(tropp(ph))(2)](n) (L=acn, n=+1; L=Cl(-), n=0). Values for K(d) (K(f)), that is, the dissociation (formation) equilibrium constant, and k(d) (k(f)), that is, the dissociation (formation) rate constant, were obtained. The formation reactions are fast, especially with the trans isomers (k(f)>1x10(5) m(-1) s(-1)). The reaction with the sterically more hindered cis isomers is at least one order of magnitude slower. The stability of the five-coordinate complexes [ML(tropp(ph))(2)](n) increases with Ir>Rh and Cl(-)>acn. The dissociation reaction has a pronounced influence on the square-wave (SW) voltammograms of trans/cis-[Ir(tropp(ph))(2)](+). With the help of the thermodynamic and kinetic data independently determined by other physical means, these reactions could be simulated and allowed the setting up of a reaction sequence. Examination of the data obtained showed that the trans/cis isomerization is a process with a low activation barrier for the four-coordinate 17-electron complexes [M(tropp(ph))(2)](0) and especially that a disproportionation reaction 2 trans/cis-[M(tropp(ph))(2)](0)-->[M(tropp(ph))(2)](+)+[M(tropp(ph))(2)](-) may be sufficiently fast to mask the true reactivity of the paramagnetic species, which are probably less reactive than their diamagnetic equilibrium partners.     

Alkyl–oxygen bond formation in the mass spectra of α-chloromethyl aryl sulphones

When subjected to electron-impact, chloromethyl aryl sulphones (II, X = Cl) fragment predominantly by the loss of CH₂Cl from the molecular ion followed by the loss of SO₂ and in most cases the appropriate metastable peaks are present to confirm the transitions. In addition, alkyl–oxygen bond formation in the molecular ion was revealed by the presence of prominent peaks corresponding to the [R? ?-SO]⁺ ions. In most spectra no evidence for aryl–oxygen bond formation could be found and thus the presence of the chlorine atom was able to effectively reverse the direction of skeletal rearrangement reported for aryl methyl sulphones.     

Synthesis of [13]-membered macrocyclic stevastelins via a transesterification reaction as the key step: total synthesis of stevastelin C3

A new synthesis of stevastelin C3 (3), a [13]-membered ring component of the stevastelin family, whose structure was recently revised, is reported. Initially, a macrolactonization approach was attempted to generate the [13]-membered macrolactone but this met with failure, so a translactonization reaction was tried to obtain the targeted stevastelin C3 (3) from the corresponding [15]-membered ring counterpart. Unfortunately, this strategy did not prove successful, and, consequently, we opted to undertake a transesterification reaction from 23, as a means to accommodate the requisite aminoacid moiety at the correct position, to obtain 24. From 24, and through intermediates 25-28, the acyclic precursor of the [13]-membered ring macrolactone, compound 30, was efficiently prepared. By utilizing the synthetic course developed by Chida, we took 30 forward and completed the total synthesis of stevastelin C3 (3).     

Recoil128I atoms in iodine pentoxide under /n, γ/ process

An attempt js made to study the behaviour of recoil¹²⁸I atoms in neutron irradiated I₂O₅ at ambient temperature. The initial retention is found to be 44±2%. However, a substantial increase /57±2%/ in the value is observed upon heating the sample at 473 K for 1 h prior to irradiation. A kinetic study of post-recoil thermal annealing of neutron irradiated material is also presented. Effect of pre-heat treatment results in a decrease of rate constants and saturation retention values at respective temperatures while the E_act for the overall process remains almost unaltered.     

Kinetic studies on the foam separation of thorium (IV) with sodium lauryl sulphate

Summary The effects of pH, gas flow rate and collector concentration on the rate of thorium removal by foaming with sodium lauryl sulphate have been investigated. The obtained data indicate that only aged hydrated thorium oxide is removed by a flotation mechanism. All the other colloidal and condensed thorium species as well as the colloidal sublates which are formed between the dissolved thorium species and the collector anions appear to be removed by partition and their removal rates could be described by a reversible first-order rate equation. The obtained results are discussed in terms of thorium hydrolysis.

---

Zusammenfassung Der Einfluß der pH-Werte, Gasdurchflußmengen und Kollektor-Konzentration auf die Geschwindigkeit der Entfernung des Thoriums durch Schaumbildung mit Natrium-Lauryl-Sulfat wurde untersucht. Die Ergebnisse zeigen, daß das gealterte, wässerige Thoriumoxid durch Flotations-Mechanismen entfernt wird. Die anderen kolloidalen und kondensierten Thorium-Spezien und auch die Kolloidalprodukte, die durch Reaktionen zwischen den gelösten Thoriumspezien und den Kollektor-Anionen formiert sind, sind durch die Verteilung entfernt worden. Die Entfernungsgeschwindigkeit kann beschrieben werden durch eine reversible 1. Ordnungs-Gleichung. Die Ergebnisse werden in Abhängigkeit einer ThoriumHydrolyse diskutiert.

---

---

With 7 figures     

Hot atom chemistry in oxyanion targets,part II1: Recoil behaviour of56Mn in permanganates

Fractional precipitation techniques have been utilized to separate the lower valent and parent forms of⁵⁶Mn in permanganate targets and an attempt is made to study a few aspects of chemical stabilization of recoil⁵⁶Mn in permanganates. Ammonium permanganate, recoil behaviour of which has not been studied previously, is chosen as one of the targets along with the potassium permanganate for initial retention and also for isothermal annealing.⁵⁶Mn initial retentions of about 12% and about 4% are obtained for potassium and ammonium permanganate, respectively, by activation from a Ra–Be neutron source. A usual trend for KMnO₄ and the reduction of recoil fragments by ammonium ions in NH₄MnO₄ are seen through the isothermal annealing study.     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.