Validated Stability-Indicating GC-MS Method for Characterization of Forced Degradation Products of Trans-Caffeic Acid and Trans-Ferulic Acid

When dealing with simple phenols such as caffeic acid (CA) and ferulic acid (FA), found in a variety of plants, it is very important to have control over the most important factors that accelerate their degradation reactions. This is the first report in which the stabilities of these two compounds have been systematically tested by exposure to various different factors. Forced degradation studies were performed on pure standards (trans-CA and trans-FA), dissolved in different solvents and exposed to different oxidative, photolytic and thermal stress conditions. Additionally, a rapid, sensitive, and selective stability-indicating gas chromatographic-mass spectrometric method was developed and validated for determination of trans-CA and trans-FA in the presence of their degradation products. Cis-CA and cis-FA were confirmed as the only degradation products in all the experiments performed. All the compounds were perfectly separated by gas chromatography (GC) and identified using mass spectrometry (MS), a method that additionally elucidated their structures. In general, more protic solvents, higher temperatures, UV radiation and longer storage times led to more significant degradation (isomerization) of both trans-isomers. The most progressive isomerization of both compounds (up to 43%) was observed when the polar solutions were exposed to daylight at room temperature for 1 month. The method was validated for linearity, precision as repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The method was confirmed as linear over tested concentration ranges from 1−100 mg L⁻¹ (r²s were above 0.999). The LOD and LOQ for trans-FA were 0.15 mg L⁻¹ and 0.50 mg L⁻¹, respectively. The LOD and LOQ for trans-CA were 0.23 mg L⁻¹ and 0.77 mg L⁻¹, respectively.     

Comparison of two models for managing reliability growth during product design

Relying on reliability growth testing to improve system designis neither usually effective nor efficient. Instead it is importantto design in reliability. This requires models to estimate reliabilitygrowth in the design that can be used to assess whether goalreliability will be achieved within the target timescale forthe design process. Many models have been developed for analysisof reliability growth on test, but there has been much lessattention given to reliability growth in design. This paperdescribes and compares two models: one motivated by the practicalengineering process; the other by extending the reasoning ofstatistical reliability growth modelling. Both models are referencedin the recently revised edition of international standard IEC61164. However, there has been no reported evaluation of theirproperties. Therefore, this paper explores the commonalitiesand differences between these models through an assessment oftheir logic and their application to an industrial example.Recommendations are given for the use of reliability growthmodels to aid management of the design process and to informproduct development.     

Cyclic trihydroxamic acid derivatives

In the crystal structures of two cyclic trihydroxamic acid derivatives containing the same substructure unit, viz. 1,3,5‐trihydroxy‐1,3,5‐triazinane‐2,4,6‐trione dihydrate, C₃H₃N₃O₆·2H₂O, (I), and 1,3,5‐benz­yloxy‐1,3,5‐triazinane‐2,4,6‐trione, C₂₄H₂₁N₃O₆, (II), there is no significant difference in the geometric parameters. In (I), there are 11 hydrogen bonds of the O—H⋯O type inter­connecting the mol­ecules in a three‐dimensional network, while in (II) there are only two weak C—H⋯O hydrogen bonds. The results of IR spectroscopic analysis are in good agreement with the crystallographic study.     

On the reliability of unsaturated hydraulic conductivity calculated from the moisture retention curve

In comparison with direct measurements of unsaturated hydraulic conductivity, the methods of calculations from the moisture retention curve are attractive for their fast and simple use and low cost. These are the main reasons for their increasing use, mainly in spatial variability studies. On the other hand, it is known that their applicability is limited. The possibility of the use of the retention curve to indirectly determine hydraulic conductivities is analyzed as follows. The theoretical derivation of the relationK(h) – (h) is briefly discussed with regards to potential sources of inaccuracy. The sensitivity of the algorithm forK(h) calculation is studied as a response to possible inaccuracies in the retention curve determination. Conclusions about the usability of calculated hydraulic conductivities are drawn.     

Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

Determination of the Lipophilicity of Xanthines by Reversed-Phase Liquid Chromatography

JPC – Journal of Planar Chromatography – Modern TLC -     

Comparison of solid-phase microextraction and purge-and-trap methods for the analysis of the volatile fraction of butter

The volatile fraction of butter stored at three different temperatures was investigated to monitor quality during commercial shelf-life (90 days). Two different extraction techniques were compared: dynamic headspace (purge-and-trap), and static headspace (solid-phase microextraction, SPME). As expected, the dynamic extraction provided a generally higher amount of volatile compounds than that obtained by SPME, but, with reference to individual compounds, SPME seemed to provide better extraction for volatiles having a higher molecular mass. Despite the different performances, both methods were able to detect volatiles useful for evaluating changes during storage.     

The polysaccharide extracts from the fungi Coprinus comatus and Coprinellus truncorum do exhibit AChE inhibitory activity

The polysaccharide (PSH) extracts from the edible mushroom species Coprinus comatus and Coprinellus truncorum were screened in liquid for their acetylcholinesterase inhibitory (AChE) activity. Both extracts were found to display inhibition of the aforementioned enzyme reaching similar IC₅₀ values of 0.62 ± 0.07 and 0.61 ± 0.03 mg/mL, respectively. According to the means of FTIR spectroscopy, these PSH extracts mostly contained β-glucans. However, the presence of some proteins and polyphenolics as minor ingredients were also detected. Compared with existing literature data for anti-AChE activity of the sugar samples, the findings within this study may be treated as a profound bioactivity. Consequently, this study puts some light on the possible use of the screened macrofungi in the palliative treatment of Alzheimer’s disease.     

A differential microcalorimetric study of whey proteins and their behaviour in oil-in-water emulsions

Oil-in-water emulsions (20% soya oil, 1% protein) have been prepared containing lysozyme or isolates of -lactalbumin and β-lactoglobulin from whey protein. The structural characteristics of these proteins adsorbed at an oil/water interface were determined by following their thermal transitions using differential scanning microcalorimetry. Thermograms of the proteins in the adsorbed state differed markedly from the corresponding transitions seen for the proteins in solution. This suggests that the proteins underwent substantial changes in secondary and tertiary structure upon adsorption. In general, for all the proteins studied, a net decrease in the total energy absorbed during denaturation was found when the proteins were in an adsorbed state. Both lysozyme and -lactalbumin were in part “surface denatured”, and they showed a certain degree of reversibility between solution and the adsorbed state. β-Lactoglobulin showed the highest degree of denaturation upon adsorption and the conformational change was irreversible.     

Determination of pefloxacin in serum and pharmaceutical forms by derivative spectrophotometry

A method for the direct determination of pefloxacin in serum and pharmaceutical forms (tablets and ampoules) has been developed, based on the use of second-order derivative ultraviolet spectra. Spectrophotometric assay of pefloxacin in tablets and ampoules was carried out in 0.1 mol/L NaOH, while in serum it was performed in 0.1 mol/L NaOH with the addition of sodium dodecylsulfate, in 337–347 nm wavelength range. Linear calibration curves were obtained in the concentration ranges 2–30g/mL pefloxacin for tablets and ampoules and 0.12–5 g/ mL for serum samples. Relative error of determination, as criterion for accuracy, was less than 1%, while the precision was better than 4 ng/ml. The minimum detectable concentration of pefloxacin in serum was 15 ng/mL.