General characteristics of the copper-based mercury film electrode

The optimum conditions for the preparation, storage, conditioning and renewal of copper-based mercury film electrodes (CBMFEs) are given. The voltammetric results obtained at these electrodes are compared with the predictions of the theory of cyclic and stripping voltammetry at the mercury film electrode, as well as with the results obtained at the silver-based and the platinum-based mercury film electrodes. The advantage of a CBMFE is prolonged life-time, whereas the disadvantages ar the decreased range of usable positive potentials and the possibility of interfering reactions of the electrodeposited metals with the copper substrate or copper dissolved in the mercury phase. The presence of copper has no essential influence on the behaviour of lead and thallium; it affects the behaviour of zinc markedly and that of cadmium and indium slightly. The conditions allowing the minimization of the harmful action of copper on the behaviour of cadmium and indium have been found.     

The reaction of carbanions with 2-substituted-2-nitropropanes : Substitution and dimerization occurring by radical chain processes involving electron transfer

The reaction of mono-enolate anions with O₂NCMe₂X where X = Cl, NO₂, p-MePhSO₂ yield coupling (RCOCH(R′)(CMe₂NO₂) and enolate dimerization products (RCOCH(R′)CH(R′)COR) by free radical chain mechanisms involving bimolecular substitution or electron transfer reactions between the enolate anion and the intermediate nitro alkane radical anion (XCMe₂NO₂^?).     

Polymerization of methylmethacrylate in presence of tetramethylthiuramdisulphide

The effect of TMTD on the polymerization of methyl methacrylate was studied. The plot of $\text{R}{}_{\mathrm{P}}\text{vs [TMTD]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ shows a maximum ascribed to participation of TMTD-radicals in cross (P′ + RS′) and mutual-termination (RS′ + RS′). The total polymerization rate is then well expressed by a derived relation. Study of the influence of TMTD on the molecular weight of polymethylmethacrylate allows characterization of the transfer process.     

Optimization of CuW alloy electrodeposition towards high-tungsten content

With the help of the factorial design of experiments, optimization of the deposition of the CuW alloy was successfully done. The important deposition parameters were identified as pH, current density, and—the most important one—copper ion concentration. All of them were examined in their wide ranges. Under optimal conditions, in a citrate bath, with copper ion concentration of 1.0 mM, at current density of −100 mA cm⁻² and at pH ca. 8.3, the alloy layer had the highest tungsten content (circa 30 wt.%), satisfactory adhesion and a smooth and crackless morphology. The structure of the electrodeposited alloy can be described as an amorphous solid solution of Cu in W with built-in Cu nanocrystals.

     

Activity changes of glassy carbon electrodes caused by their exposure to OH• radicals

GC electrodes were exposed to Fenton solutions. The surface changes produced by the OH^? radicals of these solution were inspected using SEM, XPS, Raman spectroscopy and electrochemistry. The OH^? radicals caused erosion and roughening of the surface, selective oxidation and dissolution of sp² carbon, and reduction of the number of nucleation sites for silver deposition.     

Hot embossing of PTFE: Towards superhydrophobic surfaces

Three types of reusable stamps with features in the form of 2D arrays of pits having lateral dimensions in the range of 2-80 μm and heights of 1.5-15 μm were successfully employed for the hot embossing of PTFE at temperatures up to 50 °C above the glass transition temperature of PTFE amorphous phase. Due to the softening of PTFE at the temperatures used in this study, we were able to decrease imprint pressure significantly when comparing with the imprint conditions reported by other authors. Impact of the imprint temperature, pressure and time on the fidelity of pattern transfer as well as on water repellency was tested. The best results of embossing were achieved by applying pressure of 10 kg/cm² for 2 min at 170 °C. In this case, flattening of a natural PTFE roughness and pretty accurate deep replicas of the stamp patterns were observable on the whole imprinted area. Improvement in water repellency was largest for the samples imprinted by Ni stamp patterned with a 2D array of 2 μm square pits spaced by the same dimension and having a depth of 1.5 μm. Cassie-Baxter wetting regime was observed for the deepest imprints with water contact angles up to the superhydrophobic limit.     

Increase in rate of electrodeposition and in Ni(II) concentration in the bath as a way to control grain size of amorphous/nanocrystalline Ni-W alloys

Calculations based on the equilibria involved have been carried out to find the conditions of the highest possible solubility of Ni(II) in an ammonia-citrate bath for the electrodeposition of amorphous/nanocrystalline Ni-W alloys. The appropriate increase in the concentration of citrate, followed by the corresponding increase in the concentration of Ni(II), has led, under the conditions of constant current, to the increase in the efficiency of the electrodeposition and therefore the rate of electrodeposition by 3.2 times. The amorphous alloys obtained in solutions of different Ni(II) concentrations had different sizes of nanocrystals (15–100 ?), as determined from X-ray diffractograms, and different alloy compositions (10–19.5 at% of W), but were of similar high hardness. Electronic Publication     

Early evolution of transversally thermalized partons

The idea that the parton system created in relativistic heavy-ion collisions (i) emerges in a state with transverse momenta close to thermodynamic equilibrium and (ii) its evolution at early times is dominated by the 2-dimensional (transverse) hydrodynamics of the ideal fluid is investigated. It is argued that this mechanism may help to solve the problem of early equilibration.     

Electroanalytical and spectroscopic procedures for examination of interactions between double stranded DNA and intercalating drugs

A method is presented for the electroanalytical characterization of interactions of dsDNA with a drug, under conditions that both agents are dissolved in the phosphate buffer solution and both are electroactive. Normal pulse, square wave, differential pulse, and cyclic voltammetries were employed in the measurements of the drug and dsDNA oxidation signals at carbon electrodes. UV–Vis spectroscopy was used as a non-electrochemical method to support the electroanalytical data. An anticancer drug, C-1311 (5-diethylaminoethyl-amino-8-hydroxyimidazoacridinone), has been selected for the examination. Normal pulse voltammetry was particularly useful in showing that under the conditions employed neither dsDNA nor the drug were adsorbed at the electrode surface. Necessary conditions for the appearance of the well-defined dsDNA voltammetric signal (guanine peak) are: rigorous chemical and biological purity in the cell and appropriate purity of DNA. An analysis of the obtained results confirmed that there were two modes of interaction between C-1311 and dsDNA: by intercalation and electrostatically. In the presence of excess NaCl the electrostatic interactions deteriorate. The binding constants (K ₁ and K ₂, respectively) and the number (n) of nucleic base pairs (bp) and the number (m) of phosphate groups (pg) interacting with one molecule of drug have been determined. For strong interactions (intercalation) the values of the binding constant, K ₁, and the binding-site size, n, equal 3.7 × 10⁴ M⁻¹ and 2.1, respectively. For the weak electrostatic interactions the K ₂ and m parameters equal 0.28 × 10⁴ M⁻¹ and 4.7. The intercalation process is rather slow and its rate (the conditions of pseudo-first-order reaction) was estimated to equal 7 × 10⁻⁴ s⁻¹. The possibility of independent determination of both interacting agents was very useful in the study. Figure Intercalation of C-1311 into a dsDNA fragment