Electrochemical Characteristics of Discrete,Uniform, and Monodispersed Hollow Mesoporous Carbon Spheres in Double‐Layered Supercapacitors

Core–shell‐structured mesoporous silica spheres were prepared by using n‐octadecyltrimethoxysilane (C18TMS) as the surfactant. Hollow mesoporous carbon spheres with controllable diameters were fabricated from core–shell‐structured mesoporous silica sphere templates by chemical vapor deposition (CVD). By controlling the thickness of the silica shell, hollow carbon spheres (HCSs) with different diameters can be obtained. The use of ethylene as the carbon precursor in the CVD process produces the materials in a single step without the need to remove the surfactant. The mechanism of formation and the role played by the surfactant, C18TMS, are investigated. The materials have large potential in double‐layer supercapacitors, and their electrochemical properties were determined. HCSs with thicker mesoporous shells possess a larger surface area, which in turn increases their electrochemical capacitance. The samples prepared at a lower temperature also exhibit increased capacitance as a result of the Brunauer–Emmett–Teller (BET) area and larger pore size.     

Nanosized carbon black as synergist in PP/POE-MA/IFR system for simultaneously improving thermal,electrical and mechanical properties

Nanosized carbon black (CB) was introduced into polypropylene/maleic anhydride-grafted polyolefin elastomer/intumescent flame retardant (PP/POE-MA/IFR) system to investigate the effect of nanofiller as synergist on thermal, electrical and mechanical properties of polymer composites. With 5 mass% CB into PP/POE-MA/IFR system (POFC5), the T_max (corresponded to the temperature at the maximum mass loss rate) under air was increased by 122.4 °C; its limited oxygen index was as high as 31.4%; its vertical burning rating (UL-94) reached V0, and the peak value of heat release rate was decreased to only 19% of neat PP in cone calorimeter testing. Moreover, PP composites exhibited good electrical conductivity with more than 1.6 mass% CB, which is a low loading level to reach the critical percolation concentration. In addition, a good balance on stiffness and toughness of PP composites was achieved; especially, Young’s moduli and impact strength of POFC5 were increased to 1.26 and 2.5 times in comparison with that of neat PP, respectively. These results indicated that CB was an effective synergist in multi-component PP composites to simultaneously improve thermal, electrical and mechanical properties.

     

Insight into the Effect of ZIF-8 Particle Size on the Performance in Nanocarbon-Based Supercapacitors

Carbon materials derived from zeolitic imidazolate framework-8 (ZIF-8) and composites thereof have been intensively investigated in supercapacitors. The particle size of the used ZIF-8 ranges from dozens of nanometers to several microns. However, the influence of the particle size of ZIF-8 on the capacitive performances is still not clear. A series of ZIF-8 with different particle sizes (from 25 to 296 nm) has been synthesized and carbonized for supercapacitors. Based on TEM, EDX mapping, XRD, Raman, nitrogen adsorption–desorption, XPS, and the results of electrochemical tests, the optimal particle size (≈70 nm) for superior supercapacitor performances in both acidic and alkaline electrolytes has been obtained. This important result provides a significant reference to guide future ZIF-8 related research to achieve the best electrochemical performance.     

Microwave-assisted hydrothermal synthesis and electrochemical studies of α- and h-MoO<Subscript>3</Subscript>

Two modifications of molybdenum trioxide with orthorhombic (α-MoO₃) and hexagonal (h-MoO₃) crystal structure have been synthesized by a microwave-assisted hydrothermal method, facilitated by formic acid. Characterization by means of X-ray diffraction, scanning electron microscopy, specific surface analysis, and Fourier-transform infrared, Raman, and UV-Vis spectroscopy reveals phase-pure crystalline powder samples of hexagonal h-MoO₃ microrods and of α-MoO₃ nanobelt bundles, respectively. The electrochemical properties of the MoO₃ compounds, studied by cyclic voltammetry and galvanostatic cycling vs. Li/Li⁺, strongly depend on the structure and the applied potential range. In the range of 1.5–3.5 V, Li⁺-ions can be reversibly intercalated into the α-MoO₃ nanobelts. Utilizing the material in this way as intercalation cathode material yields an initial discharge capacity of 295 mA h g^?1 at 100 mA g^?1 and comparably moderate capacity fading of 25% between cycles 20 and 100. Extending the potential range to 0.01–3.0 V induces the conversion reaction to Mo, which for both modifications yields high initial capacities of around 1500 mA h g^?1 but is associated with much stronger capacity fading.     

Acidic Monosaccharides become Incorporated into Calcite Single Crystals**

Carbohydrates, along with proteins and peptides, are known to represent a major class of biomacromolecules involved in calcium carbonate biomineralization. However, in spite of multiple physical and biochemical characterizations, the explicit role of saccharide macromolecules (long chains of carbohydrate molecules) in mineral deposition is not yet understood. In this study, we investigated the influence of two common acidic monosaccharides (MSs), the two simplest forms of acidic carbohydrates, namely glucuronic and galacturonic acids, on the formation of calcite crystals in vitro. We show here that the size, morphology, and microstructure of calcite crystals are altered when they are grown in the presence of these MSs. More importantly, these MSs were found to become incorporated into the calcite crystalline lattice and induce anisotropic lattice distortions, a phenomenon widely studied for other biomolecules related to CaCO₃ biomineralization, but never before reported in the case of single MSs. Changes in the calcite lattice induced by MSs incorporation were precisely determined by high-resolution synchrotron powder X-ray diffraction. We believe that the results of this research may deepen our understanding of the interaction of saccharide polymers with an inorganic host and shed light on the implications of carbohydrates for biomineralization processes.     

Controlled oxidation of graphite to graphene oxide with novel oxidants in a bulk scale

A series of different concentrations of Eu³⁺ and Dy³⁺ ions co-doping yttrium vanadate phosphors coated with Fe₃O₄ (YVO₄:Eu³⁺, Dy³⁺@Fe₃O₄) was successful prepared by using two steps route including sol?Cgel method and hydrothermal method. The resulting phase formation, particle morphology, structure, luminescent, and magnetic properties were examined by X-ray diffraction, transmission electron microscopy, photoluminescence spectra, and vibrating sample magnetometer. The results indicate that the diameter of the YVO₄:Eu³⁺, Dy³⁺@Fe₃O₄ nanocomposites is 100?C300?nm. The special saturation magnetization Ms of the nanocomposites is 53?emu/g. Additionally, the emission intensities of YVO₄:Eu³⁺ or Dy³⁺ ions are regularly changed with the emission doping concentrations. After coating with Fe₃O₄, the variation of the luminescent intensity of YVO₄:Eu³⁺, Dy³⁺@Fe₃O₄ magnetic phosphors is different.     

Waste-free synthesis of silica nanospheres and silica nanocoatings from recycled ethanol–ammonium solution

In this study, ethanol–ammonium recovery using a distillation system was evaluated. The experimental design was used to evaluate the possibility of solvent re-use and the influence of distillation on the recovery yield, ethanol–ammonium ratio (catalyst concentration) and size of the obtained nanostructures. The synthesised silica nanospheres from distilled ethanol–ammonium were compared in terms of size and shape (ammonium concentration) to the nanostructures obtained from filtrated and centrifuged solvents. The results showed that the process for ethanol–ammonium recovery proposed in this work, provides a large potential for reducing the amount of waste from the synthesis.     

Selective oxidation of metallic single-walled carbon nanotubes

In this work we present a simple and non-invasive approach to the preparation of semi-conducting single-walled carbon nanotubes (SWCNTs) through selective destruction of the metallic counterparts present in the starting material. Most separation techniques require chemical treatment, the application of ultrasound, or the addition of auxiliary molecules, which lead to the introduction of defects and impurities. In this contribution, laser ablation SWCNTs were selectively oxidised via long-term heating leading to the enrichment of semi-conductive nanotubes. Spectroscopic analysis demonstrates that the selective character of oxidation occurs only in the optimal temperature range, determined by thermo-gravimetric analysis. By tuning the process parameters, one can obtain a sample exhibiting different purity (up to 95 % of semi-conducting nanotubes) and separation efficiency. The samples’ quality and yield of separation were determined by UV-VIS-NIR spectroscopy, Raman spectroscopy, and TG analysis. The approach presented is readily scaleable.