Simple method for the determination of trace levels of pesticides in honeybees using matrix solid-phase dispersion and gas chromatography

A simple multiresidue method for the determination of insecticides in honeybees is described. The developed method is based on the matrix solid-phase dispersion technique. A total number of 12 insecticides (azinfos-methyl, buprofezin, chlorpyriphos, chlorpyriphos-methyl, diazinon, ethion, fenitrothion, fipronil, methidathion, phosalone, pirimicarb, propoxur) used on flowering fields are determined by this method. The method uses Florisil and silica as dispersing agents, alumina and silica as cleanup adsorbents and a low polarity solvent system to elute pesticide residues from the honeybee samples. The insecticides were quantified using capillary gas chromatography with a nitrogen-phosphorus detector. The method has shown good recovery (70-110%) for various levels of spiked samples (0.01-1.0 mg/kg). The relative standard deviations were in the range of 2-8% for all pesticides studied. The limits of detection were in the range of 0.005-0.05 mg/kg. The procedure can be applied for the determination of residues of low-polarity and medium polarity pesticides in honeybee samples.     

Simple formula for nuclear charge radius

A new formula for the nuclear charge radius is proposed, dependent on the mass numberA and neutron excessN-Z in the nucleus. It is simple and it reproduces all the experimentally available mean square radii and their isotopic shifts of even-even nuclei much better than other frequently used relations.This work is partly supported by the Polish Committee of Scientific Research under contract No. 203119101     

The influence of chitosan on in vitro properties of Eudragit RS microspheres

Eudragit RS microspheres containing chitosan hydrochloride were prepared by the solvent evaporation method using acetone/liquid paraffin solvent system and their properties were compared with Eudragit RS microspheres without chitosan, prepared in our previous study. Different stirring rates were applied (400-1200 rpm) and drug content, Higuchi dissolution rate constant, surface and structure characteristics of the microspheres were determined for each size fraction. An increase in average particle size with a reduction of stirring rate appeared in limited interval in both series. The average particle size of microspheres without chitosan, prepared at the same stirring rate, was smaller. Pipemidic acid content increased with increasing fraction particle size, but not with increasing stirring rate as it was observed for microspheres without chitosan. We presume that high pipemidic acid content in larger microspheres is a consequence of cumulation of undissolved pipemidic acid particles in larger droplets during microspheres preparation procedure. Pipemidic acid release was faster from microspheres with chitosan and no correlation between Higuchi dissolution rate constant and stirring rate or fraction particle size was found, though it existed in the system without chitosan. Structure and surface characteristics of microspheres observed by scanning electron microscope (SEM) were not changed significantly by incorporation of chitosan. But in contrast with microspheres without chitosan, the surface of chitosan microspheres was more porous after three hours of dissolution. It is supposed that the influence of particle size fraction and stirring rate on release characteristics is expressed to a great extent through porosity and indirectly through total effective surface area, but the incorporation of highly soluble component i.e. chitosan salt hides these effects on drug release. In conclusion, changes in biopharmaceutical properties due to varying stirring rate and fraction particle size exhibited the same direction as those reported for the microspheres without chitosan, although they are less expressed because of increased experimental variability, likely caused by chitosan.     

Plasma enhanced aerosol–gel method: a new way of preparing ceramic coatings

The sol–gel process is widely used for the production of powders, coatings and bulk materials. However, being a wet-chemical technique, it has certain limitations related to properties of aqueous colloidal solution, especially when applied as a coating. The most frequently used methods, such as dip- and spin-coating, are difficult to apply onto more complex substrates. In these cases, the aerosol–gel deposition method can be regarded as the solution of this problem. In the present article, a novel plasma enhanced aerosol–gel method of coatings production is presented. A novelty of this method is based on an integration of the aerosol–gel deposition of thin films and their low temperature plasma treatment. Owing to the above, all stages of the coatings production process—substrate preparation, film deposition, and its plasma treatment, can be carried out in a single reactor. The design and operational scheme of such device is presented in this work. Using this device, thin coatings were first deposited on substrates and then plasma treated. The effect of deposition and plasma discharge conditions on morphology and chemical structure of the films has been studied. It was found that plasma treatment had a substantial influence on all the examined properties of the aerosol–gel deposited coatings.     

Theranostic Approach for the Protein Corona of Polysaccharide Nanoparticles

Polysaccharide nanoparticles are promising materials in the wide range of disciplines such as medicine, nutrition, food production, agriculture, material science and others. They excel not only in their non‐toxicity and biodegradability but also in their easy preparation. As well as inorganic particles, a protein corona (PC) around polysaccharide nanoparticles is formed in biofluids. Moreover, it has been considered that the overall response of the organism to nanoparticles presence depends on the PC. This review summarises scientific publications about the structural chemistry of polysaccharide nanoparticles and their impact on theranostic applications. Three strategies of implementation of the PC in theranostics have been discussed: I) Utilisation of the PC in therapy; II) How the composition of the PC is analysed for specific disease markers; III) How the formed PC can interact with the immune system and enhances the immunomodulation or immunoelimination. Thus, the findings from this review can contribute to improve the design of drug delivery systems. However, it is still necessary to elucidate the mechanisms of nano‐bio interactions and discover new connections in nanoscale research.     

Statistical properties of three-level atom resonance fluorescence

Statistical properties of resonance fluorescence of a three-level atom, interacting with a monochromatic, strong laser field are examined. Analytical formulas, describing first- and second-order correlation functions are presented. The effect of antibunching is predicted and the nontrivial difference between the statistical properties of differently polarized fluorescence is discussed.     

Investigation of metabolic changes in irradiated rat brain tissue by means of 1H NMR in vitro relaxation study

The effect of irradiation on concentrations and relaxation behaviour of brain metabolites was studied by means of high-resolution 1H NMR in vitro. The studies were performed on rat brains irradiated with the doses of 20 Gy applied in fractions of 2 Gy. Standard procedures were used to obtain HClO4 extracts of rat brains. The 1H NMR studies of the extracts solutions in D2O were performed using a Varian Inova-300 NMR spectrometer. The integral intensities of the metabolite signals were found to change during the irradiation cycle and after it. These changes are accompanied by the variations in the T1 relaxation times. N-acetylaspartate, glycerophosphocholine, phosphocholine, choline, creatine and phosphocreatine, myoinositol and taurine were analysed as potential markers of irradiation injury.     

A novel hydroxy functionalized polyester obtained by ring opening copolymerization of L‐lactide with a pyrolysis product of cellulose

A hydroxylactone ((1R,5S)‐1‐hydroxy‐3,6‐dioxabicyclo [3.2.1] octan‐2‐one, abbreviated as LAC) obtained from catalytic pyrolysis of cellulose was investigated as a monomer in the synthesis of polyesters by ring‐opening polymerization (ROP) with L ‐lactide. Although stannous octoate resulted inactive, ROP initiated by zirconium (IV) acetylacetonate afforded novel copolyesters from LAC and lactide mixtures in the bulk at 110 °C. Copolymers were obtained with different LAC content (from 19 to 45%) with a random microstructure as established by detailed NMR analysis. FTIR spectrometry confirmed the presence in the polymer chain of the OH groups originally present in LAC, which do not react during polymerization due to steric hindrance and inter/intramolecular hydrogen bonding. Reaction with trichloroacetylisocyanide proved that OH groups of the polyesters can be readily derivatized. The application of LAC as a comonomer enables the insertion of the alcohol functionality in polylactide avoiding protection/deprotection steps and potentially expanding the realm of biomaterials affordable from carbohydrate feedstock. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 247–257, 2009     

Intrinsic optical bistability for low-frequency rigid layer modes in MoS2 crystal

A study of the parametric optical excitation of overtones of rigid layer modes in a MoS₂ crystal is presented. This effect, resulting from the modulation of the vibrational frequency by a biharmonic optical field, is shown to lead to a significant intrinsic optical bistability, which can be registered in a four-wave mixing process.     

Comfortable, flexible upholstery fire barriers on base of bast, wool and thermostable fibres

The paper presents elastic barrier materials developed at the INF which play a role of filling and fire barrier material at the same time in upholstery furniture, reducing the development and spread of fire on flammable materials. The presented results of flammability and biophysical tests confirm the comfort of products.The developed barrier materials use natural fibres (wool, flax FR) characterized by good air permeability, hygroscopicity, moisture transport, elimination of electrostatic charges and have effect on climate of interiors also when blended with thermostable fibres such as Polyacrylate. These flexible structures based on blend of natural fibres and thermostable fibres with at least two barrier effects i.e. durable resistance to fire, thermal insulation, control of electrostatic phenomena.