Numerical Modeling of Solitons in a Low Birefringent Optical Fiber

A numerical investigation, based on the split-step Fourier transform algorithm of all optical switching of solitons in a low birefringent optical fiber is presented. The numerical algorithm is described in detail. This revised version was published online in August 2006 with corrections to the Cover Date.     

单扫描示波极谱测定痕量银

本文首次提出了运用单扫描极谱直接测定银的方法。在含N-烯丙基-N′-对苯磺酸钠硫脲及四乙烯五胺的硼砂缓冲液中,银离子在-0.66V(相对饱和甘汞电极)有一灵敏还原波。运用经典极谱或单扫描极谱,此波均可用于微量银的定量测定。“银波”的单扫描示波极谱波可在5×10~(-7)～3×10~(-5)mol/L范围内检测银。方法已用于废定影液中银含量的分析,结果满意。     

氢离子与碳膜相互作用的实验研究

此文报道了H+、H+2和H+3离子通过碳膜后,在其中产生的各种微量产物的测量结果.讨论了离子与碳膜作用中的电荷交换过程.分析了这些微量产物的形成机理.实验证明在产物的形成中电荷交换过程起关键作用.研究了离子与碳膜作用中的团簇效应和尾流效应.     

S—R分解定理的唯一性,存在性和客观性

对于连续体的一切物理可能的变形场，其变形梯度张量F可被分解为一个对称张量S和一个正交张量R的直和，这便是S-R分解定理．本文通过矩阵方法和张量方法证明了S-R分解定理的唯一性、存在性和客观性．     

对苯二甲酸二甲酯(DMT)与乙二醇(EG)的酯交换反应模拟动力学

Based on the method of ε-NTU, a mathematical modeling of ester-interchange reaction for dimethyl terephthalate (DMT) with ethylene glycol (EG) by acetate system was simulated, and, in addition, the corresponding kinetic equation is obtained by using the theoretical method of simulation. That is,-(dc)/(dt)=kc(c+k')where:-(dc)/(dt)= the reaction rate of the monomer, C -concentration of the monomer, θ-Suitable parameterk,k'-constant (k'=θ/k)The experimental results have showed that the ester-interchange reaction is a reaction neither first order or second order nor third order,but it is a reaction of secondary linear type. Yamanis^[2] doubted the correctness of the method that has been proved.Moreover,we have suggested the physical meaning of parameters.     

A simulation of thermal characteristic parameters with an inverse “S” type curve

A synthetical equation is proposed to characterize the essential features of the inverse “S” type curve on the basis of summing-up simulation approach of “S” type curve. The two physical variables in the model obtained are discussed and the detailed method used to determine the parameters is given. The model is then presented to describe the crystallization of poly(caryleher ether ketone) (PEEK) and thermal decomposition of poly(amide-imide) (PAI) respectively. It is found that some thermal characteristic parameters can be well estimated from the model simu-lated in computer.     

Titanium(IV) tungstosilicate and titanium(IV) tungstophosphate: two new inorganic ion exchangers

Crystalline phases of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been synthesised. The ion-exchange capacities of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been reported as 0.44 and 0.80 mequiv./g, respectively. Both materials show monofunctional ion-exchange characteristic and are stable in 0.1 M solutions of HNO3, HCl, H2SO4 and acetone and benzene. Ti(IV) tungstosilicate is found to be more stable thermally than Ti(IV) tungstophosphate (loss in ion-exchange capacity was found as 58 and 80%, respectively for samples heated at 200 degrees C). The Kd values for heavy metals such as Pb, Hg, Cd, Sb, Co, Zn, Ni, Fe, Cr etc. have been reported in demineralised water and two surfactant media by batch processes. Cr3+, Fe3+ and Sn4+ are totally adsorbed on both the materials in demineralised water while a decrease in Kd value with increase in concentration of two surfactants is reported. On the basis of Kd values for metal ions, thirteen binary separations and five ternary separations on Ti(IV) tungstosilicate and thirteen different binary separations and four different ternary separations on Ti(IV) tungstophosphate have been achieved. Separation of methylamine from ethylamine has been done by GC on a column packed with Ti(IV) tungstophosphate.     

Mechanical properties of BPDA-ODA polyimide fibers

An aromatic polyimide was synthesized via a one-step polycondensation reaction between biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA) in p-chlorophenol. The polyimide (BPDA-ODA) solution dopes were spun into fibers by means of dry-jet wet spinning. The as-spun fibers were drawn and treated in heating tubes for improving the mechanical properties. The thermal treatment on the fibers resulted in a relatively high tensile strength and modulus. Thermal mechanical analysis (TMA) was employed to study the linear coefficient of thermal expansion (CTE). Thermal gravimetry analysis (TGA) spectra showed that the BPDA-ODA fibers possessed an excellent property of thermo-oxidative degradation resistance. The sonic modulus E_s of the polyimide fibers was measured.