基于MATLAB的异步电动机线性化控制系统的仿真

从异步电动机在同步旋转坐标系下的状态方程出发，在一定的条件下，对其系数矩阵简化．推出异步电动机的线性化控制模型．并基于该模型得出异步电动机的线性化控制系统．以给定电机为例，对该模型的有效性、响应用MATLAB进行仿真分析．验证的结果说明上述模型具有实用价值．     

RO-heparin Inhibits L-Selectin-mediated Neutrophils Adhesion to Vascular Endothelium Under Flow Conditions

Introduction Migrationandrecruitmentofleukocytesfromblood toinflammatorylesionsitesaresequentiallyregulated byadhesionmoleculesandtheirreceptors[1].These lectinfamilyplaysamajorroleininitiatingattachement ofneutrophilstotheactivatedendothelium.P selectin,…     

Pulverized coal plasma gasification

A number of experiments on the plasma-vapor gasification of brown coals of three types have been carried out using an experimental plant with an electric-arc reactor of the combined type. On the basis of the material and heat balances, process parameters have been obtained: the degree of carbon gasification (_c), the level of sulfur conversion into the gas phase (_s), the synthesis gas concentration (CO+Hz) in the gaseous products, and the specific power consumption for the gasification process. The degree of gasification was 90.5-95.0%, the concentration of the synthesis gas amounted to 84.7–85.7%, and the level of sulfur conversion into the gas phase was 94.3–96.7%. Numerical study of the process of plasma gasification of coals was carried out using a mathematical model of motion, heating, and gasification of polydisperse coal particles in an electric-arc reactor of the combined type with an internal heat source (arc). The initial conditions for a conjugate system of nonlinear differential equations of the gas dynamics and kinetics of a pulverized coal stream interacting with the electric arc and oxidizer (water vapor) agree with the initial conditions of the experiments. The computation results satisfactorily correlate with the experimental data. The mathematical model can be used for the determination of reagent residence time and geometrical dimensions of the plasma reactor for the gasification of coals.Nomenclature c _i volume concentration of components (kmol m^–3) - x longitudinal coordinate (m) - f _i source members, determined by variation of the ith component due to chemical reactions in unit volume in unit time (kmol m^–3s^–1) - velocity (m s^–1) - M _s ash mass in one particle (kg) - C _D particle drag coefficient - 3.14 - r _s particle radius (m) - d particle diameter (m) - density (kg m^–3) - C _p heat capacity of components (J mol^t– K^–1) - Q _j thermal effect of reaction (J kmol^–1) - E_j activation energy of reaction - N _l volume concentration of particles of thelth fraction (m^–3) - T temperature (K) - emissivity factor of coal particles - 5.67 × 10^–8, blackbody emissivity coefficient (W m^–2 K^–4) - P pressure (Pa) - S reactor cross section (m²) - D reactor diameter (m) - V reactor volume (m³) - L _R reactor length (m) - F _W friction force on the wall (N) - f _g friction coefficient - residence time (s) - Nu Nusselt number - Re Reynolds number - Pr Prandtl number - thermal conductivity of gas (J m^– s^–1 K^–1) - R 8.3 × 10³, universal gas constant (J kmol K^–1) - µ _i molecular mass of component (kg kmol^–1) - dynamic viscosity coefficient of gas (kg m^–1 s^–1) - thermal efficiency of plasma reactor - q_arc specific heat flow from arc (W m^–3) - P ₁ heat supplied in vapor at T = 405 K (W) - P ₂ heat loss to wall (W) - P ₃ heat loss in the gas and slag separator chamber (W) - P ₄ heat loss in the synthesis gas oxidation chamber (W) - P ₅ heat loss in the slag catcher (W) - P ₆ heat carried away in the off-gas (W) - P heat input of arc (W) - P _arc electric power of arc (W) - Q_sp specific power consumption (kw Hr kg^–1) - d _w specific heat flow to wall (W m^–2) - _c degree of carbon gasification (%) - _s level of sulfur conversion into gas phase (%)     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

Structure, stability, and interconversion barriers of the rotamers of cis-[Pt(II)Cl(2)(quinoline)2] and cis-[Pt(II)Cl(2)(3-bromoquinoline)(quinoline)] from X-ray crystallography, NMR spectroscopy and molecular mechanics evidence

Reported are the preparations of cis-[PtCl(2)(quinoline)(2)] and cis-[PtCl(2)(3-bromoquinoline)(quinoline)] and an investigation of the stabilities and interconversion of the rotamer forms of these complexes. Both head-to-head (HTH) and head-to-tail (HTT) rotamer forms are found in the crystal structure of cis-[PtCl(2)(quinoline)(2)]. The NOESY NMR spectrum of cis-[PtCl(2)(quinoline)(2)] in dmf-d(7) at 300 K is consistent with conformational exchange brought about by rotation about the Pt-N(quinoline) bonds. H.H nonbonded distances between H atoms of the two different quinoline ligands were determined from NOESY data, and these distances are in accord with those observed in the crystal structure and derived from molecular mechanics models. cis-[PtCl(2)(3-bromoquinoline)(quinoline)] was prepared to alleviate the symmetry-imposed absence of inter-ring H2/H2 and H8/H8 NOESY cross-peaks for cis-[PtCl(2)(quinoline)(2)]. Molecular mechanics calculations on the complexes show the HTT rotamers to be 1-2 kJ mol(-)(1) more stable than the HTH forms, consistent with the (1)H spectra where the intensities of resonances for the two forms are approximately equal. Variable-temperature (1)H NMR spectra of cis-[PtCl(2)(quinoline)(2)] in dmf-d(7) indicate a rotational energy barrier of 82 +/- 4 kJ mol(-)(1). Variable-temperature (1)H NMR spectra indicate that the Br substituent on the quinoline ring does not affect the energy barrier to interconversion between the HTT and HTH forms (79 +/- 5 kJ mol(-)(1)). The steric contribution to the rotation barrier was calculated using molecular mechanics calculations and was found to be approximately 40 kJ mol(-)(1), pointing to a possible need for an electronic component to be included in future models.     

笃斯茎中六种无机元素含量分析

应用原子吸收光谱法测定了内蒙古地产的笃斯茎、叶中的Cu,Fe,Zn,Mn,Ca,Mg等六种人体必需微量元素及宏量元素的含量。从而为评价笃斯的品质及其药理、药效提供了具有一定价值的数据。     

异喹啉酰肼构筑锌配合物的合成、晶体结构及其性质

采用普通溶液法合成了配合物[Zn(eiqnthz)_2]·DMF(1)和[Zn3(piqnthz)_2Cl_2]·2H_2O(2)(Heiqnthz=N,N′-乙酰异喹啉甲酰肼,H2piqnthz=N,N′-丙酰异喹啉甲酰肼)。通过X射线单晶衍射分析、X射线粉末衍射分析、红外光谱分析、热重分析以及荧光光谱分析等分析方法对2个配合物进行结构测定和性质表征。结构分析表明配合物1是单核结构,单斜晶系,空间群为C2/c,锌离子周围有4个氮原子和2个氧原子与之配位,形成一个畸变的N4O2八面体构型。配合物2属于单斜晶系,C2/c空间群,三核结构。中心原子Zn(1)、Zn(2)、Zn(3)均为5配位,Zn(1)、Zn(3)位于分子两端并且是变形四角锥配位构型,Zn(2)位于中间形成三角双锥配位构型,整体呈V字型。荧光分析表明Heiqnthz、H2piqnthz与锌(Ⅱ)离子配位后其荧光都发生较大的红移。     

Tapered copolymers of styrene and 4-vinylbenzocyclobutene via carbanionic polymerization for crosslinkable polymer films

Well-defined polystyrene homopolymers with surface-adhesive triethoxysilyl end group were synthesized via living carbanionic polymerization, epoxide end-functionalization and subsequent hydrosilylation with triethoxysilane. Grafting-to performance of polymers with various molecular weight (M_n = 3000–14,000 g mol⁻¹) to a silicon surface was examined in dependence of reaction time, polymer concentration, solvent and number of alkoxysilyl end groups. Crosslinkable polymers for surface modification were synthesized by statistical carbanionic copolymerization of 4-vinylbenzocyclobutene (4-VBCB) and styrene, followed by epoxide end-functionalization and triethoxysilane modification (M_n = 4000–14,000 g mol⁻¹). The copolymers were characterized by ¹H-NMR, THF-SEC, and matrix-assisted laser desorption and ionization time-of-flight mass spectrometry. In situ ¹H-NMR kinetic studies in cyclohexane-d₁₂ provided information regarding the monomer gradient in the polymer chains, with styrene being the more reactive monomer (r_s = 2.75, r_4-VBCB = 0.23). Thin polymer films on silicon wafers were prepared by grafting-to surface modification under conditions derived for the polystyrene homopolymer. The traceless, thermally induced crosslinking reaction of the benzocyclobutene units was studied by DSC in bulk as well as in 3–6 nm thick polymer films. Crosslinked films were analyzed by atomic force microscopy, ellipsometry, and nanoindentation, showing smooth polymer films with an increased modulus. © 2019 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 181–192     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity.Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-acoess and hazardous.In addition.optical fiber dosimeters are immune to electrical and radio-frequency interference.In this paper,a novel remote optical fiber radiation dosimeter is described.The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL.The measuring range of the dosimeter is from 0.1 to 100 Gy.The equipment is relatively simple and small in size,and has low power consumption.This device is suitable for measuring the space radiation dose and also can be used in high radiation dose condition and other dangerous radiation occasions.