Physicochemical aspects of the liposome-wool interaction in wool dyeing

Despite the promising application of liposomes in wool dyeing, little is known about the mechanism of liposome interactions with the wool fiber and dyestuffs. The kinetics of wool dyeing by two dyes, Acid Green 27 (hydrophobic) and Acid Green 25 (hydrophilic), were compared in three experimental protocols: (1) without liposomes, (2) in the presence of phosphatidylcholine (PC) liposomes, and (3) with wool previously treated with PC liposomes. Physicochemical interactions of liposomes with wool fibers were studied under experimental dyeing conditions with particular interest in the liposome affinity to the fiber surface and changes in the lipid composition of the wool fibers. The results obtained indicate that the presence of liposomes favors the retention of these two dyes in the dyeing bath, this effect being more pronounced in case of the hydrophobic dye. Furthermore, the liposome treatment is accompanied by substantial absorption of PC by wool fibers with simultaneous partial solubilization of their polar lipids (more evident at higher temperatures). This may result in structural modification of the cell membrane complex of wool fibers, which could account for a high level of the dye exhaustion observed at the end of the liposome dyeing process.     

Synthesis of microcin SF608

The first total synthesis of aquatic peptide microcin SF608 is described. Coupling of L-Hpla with the dipeptide L-Phe-L-Choi followed by coupling with agmatine and a deprotection step gave microcin SF608. In addition, the levorotatory character of L-Hpla (5) was thoroughly established, and the conformational analysis of L-Choi containing peptides 1 and 8-10 was performed using NMR spectroscopy to examine the cis-trans isomer equilibrium of the L-Phe-L-Choi amide bond.     

Simplified procedures for the analysis of polycyclic aromatic hydrocarbons in water, sediments and mussels

We describe in this paper simple and robust analytical protocols to determine the 16 polycyclic aromatic hydrocarbons (PAHs) of the US Environmental Protection Agency priority list in water, sediment and mussels. For water samples, eight different solid-phase extraction (SPE) sorbents have been compared and among them, C18 provided highest recoveries and limits of detection of 0.3-15 ng/L. For lyophilized sediments, Soxhlet and ultrasonic extraction were compared, and the last one permitted to recover all analytes with highest repetitivity and was validated by analysing a certified reference material. Finally, the analysis of mussels was undertaken using Soxhlet, ultrasonic and pressurized liquid extraction (PLE) and the performance of several clean-up steps are compared. Whereas for the former two, incomplete recovery or losses of some analytes were evidenced, PLE permitted a more efficient extraction and although alkaline digestion was necessary to remove coextracted compounds, the method gave acceptable recoveries and limits of detection of 0.5-7.7 microg/kg dry mass, as for sediments. In all cases, analysis was performed by gas chromatography coupled to mass spectrometry and internal standard quantification was performed using five deuterated PAHs. Each method performance is discussed for the three matrices analysed and the paper reports advantages and disadvantages of each for their routine application in monitoring programs.     

A test suite for the evaluation of mixed multi-unit combinatorial auctions

Mixed Multi-Unit Combinatorial Auctions extend and generalize all the preceding types of combinatorial auctions. In this paper, we try to make headway on the practical application of MMUCAs by: (1) providing an algorithm to generate artificial data that is representative of the sort of scenarios a winner determination algorithm is likely to encounter; and (2) subsequently assessing the performance of an Integer Programming implementation of MMUCA in CPLEX.     

Luminance adaptation model for increasing the dynamic range of an imaging system based on a CCD camera

We propose a luminance adaptation model (LAM) to increase the dynamic range of an imaging system when scenes containing areas of low and high illumination are imaged. The LAM that we developed is based on capturing images at different exposure times to obtain digital levels within the linear response zone for all the pixels in the image. The levels are subsequently transformed to a reference exposure time that is common to all pixels. We use a linear transformation whose coefficients are determined by the digital levels obtained for a set of flat-spectrum samples. In this study, the LAM is applied to a multispectral imaging system that is based on a CCD camera used for color measurements and spectral reconstructions. It is shown to be a very useful method for increasing the dynamic range of the system, whilst maintaining its accuracy.     

Isothermal crystallization kinetics and spherulitic morphology of poly(4‐hydroxybutyric acid‐alt‐glycolic acid)

Isothermal crystallization behavior of a new regular polyester constituted by glycolic acid and 4‐hydroxybutyric acid units is studied by means of differential scanning calorimetry and hot‐stage optical microscopy. A wide range of crystallization conditions were experimentally accessible, allowing various morphological features to be observed and accurate estimates made of characteristic growth parameters, including radial growth and nucleation rates. Three‐dimensional spherulitic growth from heterogeneous nuclei is deduced from the Avrami analysis, whereas optical micrographs reveal two different spherulitic textures that agree with the existence of two crystallization regimes. These can be well distinguished from the breaks observed in the Lauritzen and Hoffman plots when the linear crystal growth rate or the overall crystallization rate is considered. Ringed and nonringed spherulites with negative and positive birefringence, respectively, can be obtained depending on crystallization conditions and regimes. The studied polyester shows rather complex melting behavior which is interpreted in terms of a recrystallization process involving the two different kinds of spherulites. This study allows polymorphism to be discounted. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2640–2653, 2007     

Phosphine-functionalised polymer resins as Pd scavengers

Three phosphine-functionalised polymer resins were used as scavengers of palladium catalysts from Buchwald-Hartwig aryl amination reactions. The purity of the products was assessed, and residual palladium analysed by ICP-AES. Scavenging efficiencies of up to >98.5% were demonstrated.     

Multi-residue analytical methods using LC-tandem MS for the determination of pharmaceuticals in environmental and wastewater samples: a review

Multi-residue analytical methodologies are becoming the preferred and required tools against single group analysis, as they provide wider knowledge about the occurrence of pharmaceuticals in the environment necessary for further study of their removal, partition and ultimate fate. However, simultaneous analysis of compounds from different groups with quite different physico-chemical characteristics requires a compromise in the selection of experimental conditions, which in some cases are not the best conditions for all the analytes studied. In this article, an overview of analytical methodologies focusing on the simultaneous determination of acidic, neutral and basic compounds belonging to different therapeutical classes is presented. The state-of-the-art of LC-MS/MS for multi-class analysis is reviewed, highlighting the specific requirements for such analysis.     

Applications of phosphine-functionalised polymers in organic synthesis

This tutorial review deals with recent advances in the use of phosphine-functionalised polymers in organic synthesis. In the first part of the review, some recent applications of polymer-supported palladium catalysts are reviewed, particularly recyclable catalysts for C-C and C-X bond formation with aryl bromide and chloride substrates. In the second half, novel applications of phosphine-functionalised polymers as reagents, scavengers, organocatalysts and linkers in organic chemistry are presented. Emphasis is placed on the synthesis of biologically active molecules.