Synthesis, Characterization, and Biological Activity of n-Tributyltin Derivatives of Pharmaceutically Active Carboxylates

Summary.  Tributyltin(IV) derivatives of six different pharmaceutically active carboxylates were synthesized. The complexes were characterized by different analytical techniques (elemental analysis; infrared, NMR, and mass spectroscopy). ¹¹⁹Sn NMR data were also recorded in six different coordinating and non-coordinating solvents. The antibacterial activities of the compounds were tested using ten different bacteria relative to the reference drugs ampicillin and cephalexin. Received September 20, 2001. Accepted (revised) December 6, 2001     

Synthesis and structural characterization of a new heterobimetallic coordination complex of barium and cobalt for use as a precursor for chemical vapor deposition

Ba(dmae)2 (dmaeH=N,N-dimethylaminoethanol, C4H11NO) reacts with Co(acac)2 (acac=2,4-pentanedionate) to produce the trinuclear coordination complex [Ba2Co(acac)4(dmae)3(dmaeH)] in an 85% yield. Spectroscopic and single-crystal X-ray diffraction experiments indicate that the complex possesses a structure in which two barium atoms and a cobalt atom are bridged by acac and dmae groups. The barium centers are eight and nine coordinate with BaO7N and BaO7N2 coordination spheres while the cobalt is a more regular CoO5N octahedron. This 2:1 heterobimetallic molecular complex was investigated as precursor for the deposition of thin film by AACVD. The film was characterized by SEM and XRD. TGA shows that the complex starts thermal decomposition upon heating in nitrogen atmosphere at 105 degrees C to produce barium cobalt oxide material of a Ba2CoO3 composition with an orthorhombic structure. The synthetic approach detailed here represents a unique route to the formation of a heterobimetallic barium cobalt coordination complex.     

Organotin(IV) derivatives as biocides: An investigation of structure by IR, solution NMR, electron impact MS and assessment of structure correlation with biocidal activity

A brief account is given of the synthesis, structural chemistry and the antibacterial, antifungal and cytotoxic effects of organotin complexes of 2-[(2,4-dichloroanilinocarbonyl)]benzoic acid. The unimolar and bimolar substitution products have been characterized by elemental analysis and spectral studies, including IR, ¹H NMR, ¹³C NMR, ¹¹⁹Sn NMR, and mass spectra. The data support the binding of the oxygen atom to the tin atom in [R₂Sn(OOCR’)₂] and [R₃Sn(OOCR’)] (R = Me, Bu, and Ph, R’ = 2-[(2,4-dichloroanilinocarbonyl)]benzoic acid). Based on these studies, with a coordination number of four, a distorted tetrahedral geometry has been proposed for the resulting derivatives in solution. The free ligand (R’/COOH) and its respective tin complexes were tested in vitro against a number of microorganisms to assess their biocidal properties and to correlate them with the structures of the derivatives.     

Synthesis and Characterization of Diphenyltin(IV) Dicarboxylates Containing Germanium

Twelve new germanium substituted diphenyltin dipropionates with the general formula (R¹GeCHR²‐CHR³COO)₂SnPh₂ where R¹ = N(CH₂CH₂O)₃, (C₆H₅)₃ and (CH₃C₆H₄)₃, R² = H, CH₃, C₆H₅, p‐CH₃C₆H₄, p‐CH₃OC₆H₄, p‐ClC₆H₄, and R³ = H, CH₃ have been synthesized by the reaction of diphenyltin oxide with a germanium substituted propionic acid. All the compounds were characterized by elemental analysis, IR, multi‐nuclear (¹H, ¹³C, ¹¹⁹Sn) NMR and Mössbauer spectroscopies as well as mass spectrometry. The in vitro antibacterial activity of selected compounds is also reported.     

Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.     

Thermal dry reforming of methane over La2O3 co-supported Ni/MgAl2O4 catalyst for hydrogen-rich syngas production

Research on Chemical Intermediates - The excess emission of greenhouse gases (GHGs) such as CO2 and CH4 is posing an acute threat to the environment, and efficient ways are being sought to utilize...     

Benchmark approach to search of cost-effective and accurate density functional for homolytic cleavage of C─Mg bond of Grignard reagent

Grignard reactions are of importance in organic chemistry for the synthesis β-keto esters and diethyl malonate, alcohols, aldehydes or ketones, monocarboxylic acids, and other organometallic compounds. Generally, the heterolytic dissociation of C─Mg bond in Grignard reagent is the key step in these reactions. Recently, homolytic cleavage of the C─Mg bond in Grignard reagents has been reported in the preparation of stable radicals. These reactive species react with other compounds, which result in the formation of hydrocarbons and their derivatives. Therefore, the study of homolytic cleavage of C─Mg bonds is quite vital to better understand the kinetics and thermodynamics of these reactions. In the current study, a benchmark approach is adopted to find a cost-effective and accurate density functional (DF) for bond dissociation energies measurement of the C─Mg bond of Grignard reagents. Twenty-nine DFs from 13 density functional theory (DFT) classes with three types of basis sets (Pople' 6-31G(d) and 6-311G(d), Dunning's aug-cc-pVDZ, and Karlsruhe' def2-SVP basis sets) are implemented for the measurement of dissociation energies of the C─Mg bond. Theoretical dissociation energy values are compared with experimental reported values of the C─Mg bond of selected Grignard reagents. TPSSTPSS of the meta-GGA class with 6-31G (d) basis set gave accurate results, and its Pearson's correlation is 0.95. SD, root mean square deviation, and mean unsigned error of this method are 2.36 kcal mol⁻¹, 2.33 kcal mol⁻¹, and −0.46 kcal mol⁻¹, respectively. TPSSTPSS of the meta-GGA class is a one-electron, self-interaction, error-free Tao-Perdew-Staroverov-Scuseria functional that performed better with the 6-31G(d) basis set.