Two-dimensional numerical calculation of the flow field about a scoop inlet by the piecewise linear method

The piecewise linear method (PLM) based on time operator splitting is used to solve the unsteady compressible Euler equations describing the two-dimensional flow around and through a straight wall inlet placed stationary in a rapidly rotating supersonic flow. The PLM scheme is formulated as a Lagrangian step followed by an Eulerian remap. The inhomogeneous terms in the Euler equations written in cylindrical coordinates are first removed by Sod's method and the resulting set of equations is further reduced to two sets of one-dimensional Lagrangian equations, using time operator splitting. The numerically generated flow fields are presented for different values of the back pressure imposed at the downstream exit of the inlet nozzle. An oblique shock wave is formed in front of the almost whole portion of the inlet entrance, the incoming streamlines being deflected towards the higher pressure side after passing through the oblique shock wave and then bending down to the lower pressure side. A reverse flow appears inside the inlet nozzle owing to the recovery pressure of the incoming streams being lower than the back pressure of the inlet nozzle.     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

Laser spectroscopic investigation of salicylic acids hydrogen bonded with water in supersonic jets: Microsolvation effects for excited state proton dislocation

Geometric structures and excited-state proton dislocation of size-selected salicylic acid clusters (salicylic acid and 5-methoxysalicylic acid) with water were studied by using laser spectroscopic techniques. Fluorescence excitation, dispersed fluorescence, and infrared (IR) spectra of those clusters in supersonic jets were examined for both the electronic ground (S0) and first excited (S1) states. The geometric structures of the clusters were determined on the basis of the IR spectra of the OH stretch region with the help of quantum chemical calculations. The hydroxyl group of the water moiety in the clusters forms a ring involving the carboxylic group of the salicylic acid moiety. The IR spectra in S0 show that the intramolecular hydrogen bond in the salicylic acid moiety is still held upon cluster formation, but the phenolic OH stretch band intensity is remarkably weaken in the clusters. The IR spectra in the S1 state and dispersed fluorescence spectra indicated that the intramolecular excited state proton dislocation is hardly affected by the microsolvation with water, in contrast with the strong suppression of the dislocation in the self-solvation.     

Vanadate-stimulated release of hepatic lipase activity from liver.

Vanadate stimulated the release of rat hepatic lipase activity from liver slices into an incubation medium in a time- and dose-dependent manner. Insulin, however, failed to have this stimulatory action, and the release by heparin was recognized, but was not additive to that by vanadate. Amiloride, an inhibitor of tyrosine kinase in some receptors and of the Na+/H+ exchange system suppressed the vanadate-stimulated release. Biochanin A, a different type of tyrosine kinase inhibitor than amiloride, also suppressed the effect of vanadate. The stimulation by vanadate was clearly preserved in Na(+)-, K(+)-, or Ca(2+)-free medium, suggesting that neither the Na+/H+ exchange system, Na+, K(+)-adenosine triphosphatase, nor Ca(2+)-influx into cells is involved in the action of this substance. These results suggest that vanadate-stimulated release of the enzyme activity is associated with the activation of the tyrosine kinase activity.     

One-pot synthesis of tropinone by tandem (domino) ene-type reactions of acetone silyl enol ethers

A synthetic approach for tropane alkaloids on the basis of tandem (domino) ene-type reactions of acetone silyl enol ethers with iminium ions is shown to be triggered by intermolecular ene-type reactions followed by 6-(2,5) silatropic ene-type cyclizations.     

Site-directed 13C solid-state NMR studies on membrane proteins: strategy and goals toward revealing conformation and dynamics as illustrated for bacteriorhodopsin labeled with [1-13C]amino acid residues

We have so far demonstrated that well-resolved and site-specifically assigned (13)C peaks as recorded by site-directed NMR study on (13)C-labeled membrane proteins can serve as a convenient probe to reveal their local conformation and dynamics. We attempted here to clarify the extent to which (13)C NMR spectra of (13)C-labeled fully hydrated bacteriorhodopsin (bR) as a typical membrane protein are visible or well resolved in the presence of inherent fluctuation motions with frequency of 10(2)-10(8) Hz, especially at the membrane surfaces. Accordingly, we estimated the relative proportion of (13)C NMR signals from the surface areas with and without peak suppression by the accelerated transverse relaxation effect by surface-bound Mn(2+) ions, which could be effective for residues within 8.7 angstroms of the membrane surface. It turned out that the experimental findings are consistent with the predicted amount of amino acid residues under consideration located within 8.7 angstroms of the surface for [1-(13)C]Val- and Ile-labeled bR and also [3-(13)C]Ala-bR. In contrast, (13)C NMR peaks from such surfaces area are almost completely or partially suppressed for [1-(13)C]Gly-, Ala-, Leu-, Phe- and Trp-labeled bR, as a result of plausible interference of the fluctuation frequency with frequency of magic angle spinning (10(4) Hz). We further assigned several (13)C NMR signals of [1-(13)C] Val-, Trp- and Ile-labeled bR on the basis of a variety of site-directed mutants with reference to those of the wild type. Further, we recorded the (13)C NMR of bR in lipid bilayers to search for the optimal conditions to be able to obtain signals with the highest peak intensities and spectral resolution. Backbone dynamics turn out to be essential for recording (13)C NMR spectra so as to escape from motional frequencies of the order of 10(4)-10(5) Hz, either in the direction of accelerated fluctuation or slowed motions in the direction of forming the 2D array.     

Vibronic coupling and Raman intensities of pyrazine

The fluorescence spectrum of pyrazine vapour and the Raman spectra of liquid pyrazine excited at various wavelengths were observed. The appearance of the long progression of the hydrogen bending vibration ν₅ (b_2g) in the fluorescence spectrum and a remarkable preresonance effect of the Raman line of the same vibration confirm the theoretical prediction given by Albrecht.     

Origin of attraction and directionality of the pi/pi interaction: model chemistry calculations of benzene dimer interaction.

A model chemistry for the evaluation of intermolecular interaction between aromatic molecules (AIMI Model) has been developed. The CCSD(T) interaction energy at the basis set limit has been estimated from the MP2 interaction energy near the basis set limit and the CCSD(T) correction term obtained by using a medium size basis set. The calculated interaction energies of the parallel, T-shaped,and slipped-parallel benzene dimers are -1.48, -2.46, and -2.48 kcal/mol, respectively. The substantial attractive interaction in benzene dimer, even where the molecules are well separated, shows that the major source of attraction is not short-range interactions such as charge-transfer but long-range interactions such as electrostatic and dispersion. The inclusion of electron correlation increases attraction significantly. The dispersion interaction is found to be the major source of attraction in the benzene dimer. The orientation dependence of the dimer interaction is mainly controlled by long-range interactions. Although electrostatic interaction is considerably weaker than dispersion interaction, it is highly orientation dependent. Dispersion and electrostatic interactions are both important for the directionality of the benzene dimer interaction.