Crystal and molecular structure of bis(2-isotropyliminomethinylphenyl) telluride

Scientific-Research Institute of Physical and Organic Chemistry, Rostov State University. A. N. Nesmeyanov Institute of Heteroorganic Compounds, Academy of Sciences of the USSR. Translated from Zhurnal Strukturnoi Khimii, Vol. 32, No. 3, pp. 104–106, May–June, 1991.     

Ion-induced modification of contact surfaces

Iron-nickel contact surfaces subjected to ion-induced modification are studied by AES, XPS and AFM. The corrosion and erosion resistance of the modified contacts is associated with features of the surface topography, and with the formation of iron and nickel nitride layers. The fine energy structure of the atomic state is revealed. Ion irradiation of the contact surfaces yields the formation of pores and cones.     

Carboxylated and decarboxylated nanotubes studied by X-ray photoelectron spectroscopy

Carbon nanotubes (CNTs) of the conic and cylindrical structure were studied by X-ray photoelectron spectroscopy in the initial state and after carboxylation and decarboxylation reactions. The O=C—O and C—O groups were revealed on the surface of the chemically modified samples. It was found that both the carboxylated and decarboxylated cylindrical CNTs contain a smaller amount of oxygen than the corresponding conic CNTs apparently due to differences in their structures.     

Hydrodechlorination of chlorobenzene in the presence of Ni/Al2O3 prepared by laser electrodispersion and from a colloidal dispersion

The low-percentage Ni/Al₂O₃ catalysts with active metal contents of 0.0002–0.1 wt % were prepared using the laser electrodispersion (LED) method and by means of supporting from a colloidal dispersion (CD). Their composition and physicochemical properties were determined by atomic absorption spectrometry, transmission electron microscopy (TEM), and XPS. With the use of TEM, it was found that average size of nickel particles in the LED catalysts was smaller than that in the CD catalysts. According to XPS data, the supporting of a metal onto a substrate by the LED method makes it possible to obtain samples containing Ni metal with a low active metal content (0.03 wt %). They exhibited a high initial activity in the hydrodechlorination reaction of chlorobenzene in a vapor phase, which was performed in a flow system at temperatures of 100–350°C. The CD catalysts were active in this reaction only at temperatures of 300–350°C. Reductive treatment led to the deactivation of LED catalysts and increased the activity and stability of samples prepared by supporting from a CD. The possible reasons for the observed changes are considered.     

Ionic and Phase Compositions of Y2.5Ce0.5Fe2.5Ga2.5O12 Ferrogarnet Powder Produced by Gel Combustion

Doklady Physical Chemistry - The ionic and phase compositions of Y2.5Ce0.5Fe2.5Ga2.5O12 ferrogarnet samples obtained by gel combustion with subsequent vacuum annealing were studied for the first...     

Gas-Phase Hydrodechlorination of Chlorobenzene over Alumina-Supported Nickel Catalysts: Effect of Support Structure and Modification with Heteropoly Acid HSiW

Kinetics and Catalysis - The physicochemical and catalytic properties of 6%Ni/Al2O3 catalysts in the gas-phase hydrodechlorination of chlorobenzene (CB) are studied. The catalysts are synthesized...     

Synthetic boron-doped carbonado,a new electrode material: synthesis in C–metal–B growth systems aimed at the lowering of the synthesis temperature without loss of electrochemical activity

New electrode material—boron-doped synthetic carbonado (bulk polycrystalline diamond)—was synthesized at high pressures and high temperatures in the C–metal (Co, Ni, or Fe) –B growth systems. The metal borides were used as the growth medium-forming substances for graphite-to-diamond transformation at a temperature of ~?1300 °C and pressure of 8 GPa. For comparison, etalon carbonado-type electrode with nearly limiting concentration of boron in diamond was synthesized by subjecting the mixture of amorphous boron with graphite to much higher temperatures (2200–2500 °C) under the same pressure. Despite the lower content of boron in diamond synthesized in the presence of metal borides, these new boron-doped carbonado electrodes are not inferior to the etalon compact in their electrochemical activity, as judging by the onset potential of anodic chlorine evolution from KCl solution. The presence of metal-containing structural defects in boron-doped diamond matrix is supposed to be responsible for the somewhat enhanced catalytic activity of the electrodes. High-pressure synthesis of bulk metal-modified boron-doped diamond opens a new avenue in the development of superior functional electrode materials.     

Correction to: The effect of small silver inclusions on the palladium activity in formicacid oxidation reaction and corrosion stability

A PdAg deposit containing ~ 25 at.% Ag is obtained by the electrochemical codeposition from an aqueous solution of Pd and Ag sulfates (Au support, 0.5 M H₂SO₄). The deposit is characterized by means of various physical, physicochemical, and electrochemical methods. The PdAg deposit demonstrates the ~ 2 times higher specific activity (per the electrochemically active surface area (EASA) of Pd) in the formic acid oxidation reaction (FAOR) as compared with the individual Pd deposit prepared under the same conditions. The effect of silver additions on the palladium activity depends on many factors. The corrosion stability of PdAg is studied in 0.5 M H₂SO₄ solution based on the overall cyclic voltammograms (CVAs) and also on anodic and cathodic half-cycles in the region E = 0.3 − 1.25 V (vs. reversible hydrogen electrode (RHE)). The electrochemical estimates are compared with the results of direct analytical determination of dissolution products in solution after anodic polarization of deposits. The total amounts of Pd dissolved substantially increase with incorporation of Ag, which is associated, first of all, with the considerable increase in the EASA; at the same time, the specific dissolution of Pd also substantially increases. The possible factors determining the active dissolution of PdAg deposits are discussed; in particular, the specific mechanism of their dissolution via silver adatoms is proposed.

     

Catalytic properties of Ce<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Zr<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> prepared using a template in the oxidation of CO

The catalytic activity in CO oxidation of Ce _x Zr_1–x O₂ double oxides prepared using pine sawdust and cetyltrimethylammonium bromide (CTAB) as templates is compared. It is found by means of SEM and the low-temperature adsorption of N₂ that biomorphic oxides reproduce the macropore structure of the template. It is shown via XRD and Raman spectroscopy that all samples contained mixed ceria-zirconia oxide. The double oxides form a cubic phase with a lattice of the fluorite type at a ratio of Ce: Zr = 4, regardless of the nature of the template; when Ce: Zr = 1, the biomorphic mixed oxide forms a tetragonal phase. According to Raman spectroscopy and XRD it was shown that the distortion of the oxygen sublattice is higher in biomorphic samples. Energy dispersive analysis shows that Ca impurities were present in the biomorphic samples, introducing additional distortions in the lattice of double oxide and leading to the formation of anionic vacancies. It is found that when Ce: Zr = 4, the conversion of CO on biomorphic oxide in the range of 100–350°C is higher than that observed for Ce _x Zr_1–x O₂ (CTAB); reducing the Ce: Zr ratio in the biomorphic sample to 1 results in a marked decrease in CO conversion at 100–200°C. It is concluded that these differences are due to changes in the mobility of the lattice oxygen.