Chiral Interlocked Corrole Dimers Directly Linked at Inner Carbon Atoms of Confused Pyrrole Rings

A facile synthetic strategy towards conformationally stable chiral chromophores based on dimeric porphyrinoids has been established. A peculiar class of face-to-face intramolecularly interlocked corrole dimers were formed by the oxidative C−C coupling linked at the inner carbon sites upon simple treatment of copper(II) ions. Their intrinsic electronic structures were modulated by the peripheral corrole ring annulations, which lead to distinct optical properties and redox profiles. The stereogenic carbon centers implemented in the confused corrole skeleton provided a rationale for designing novel chiral materials.     

Oxygen isotope effect of superconducting (Nd1−xCex)2CuO4−δ system

The effect of oxygen isotope substitution on the transition temperature T_c of a superconducting (Nd_1−xCe_x)₂CuO_4−δ system was studied, where the special synthetic method was taken to minimize ambiguous factors on the oxygen concentration and to guarantee the complete substitution of ¹⁶O by ¹⁸O. The isotope exponent in the relationship of T_c∝1/M was estimated to be less than 0.15 by magnetic susceptibility measurements.     

Structural developments in synthetic rubbers during uniaxial deformation by in situ synchrotron X‐ray diffraction

The molecular orientation and strain‐induced crystallization of synthetic rubbers—polyisoprene rubber, polybutadiene rubber, and butyl rubber [poly(isobutylene isoprene)]—during uniaxial deformation were studied with in situ synchrotron wide‐angle X‐ray diffraction. The high intensity of the synchrotron X‐rays and the new data analysis method made it possible to estimate the mass fractions of the strain‐induced crystals and amorphous chain segments in both the oriented and unoriented states. Contrary to the conventional concept, the majority of the molecules (50–75%) remained in an unoriented amorphous state at high strains. Each synthetic rubber showed a different behavior of strain‐induced crystallization and molecular orientation during extension and retraction. Our results confirmed the occurence of strain‐induced networks in the synthetic rubbers due to the inhomogeneity of the crosslink distribution. The strain‐induced networks containing microfibrillar crystals and oriented amorphous tie chains were responsible for the ultimate mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 956–964, 2004     

Simultaneous determination of serotonin and 5-hydroxyindole-3-acetic acid in human urine by automated precolumn derivatization and semi-microbore column liquid chromatography with fluorescence detection.

An improved high-performance liquid-chromatographic (HPLC) assay for the simultaneous determination of serotonin (5-HT) and 5-hydroxyindole-3-acetic acid (5-HIAA) in human urine is reported. Following the automated precolumn derivatization of urinary 5-HT and 5-HIAA with benzylamine, the derivatives are separated by isocratic elution on a reversed-phase C18 semi-microbore column, and are fluorometrically detected at an excitation wavelength of 345 nm and an emission wavelength of 480 nm. The detection limits of 5-HT and 5-HIAA are 7 and 5 nmol/l in urine (0.7 and 0.5 fmol/20-microl injection). The proposed automatic method permits a highly selective and sensitive determination of 5-HT and 5-HIAA in human urine without any sample purification.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Determination of cyclosporin A in the serum of kidney transplant patients by rapid-flow fractionation and normal-phase high-performance liquid chromatography

High-performance liquid chromatography was used to determine cyclosporin A (CsA) concentrations in the serum of kidney transplant patients by rapid-flow fractionation (RFF) followed by silica gel normal-phase high-performance liquid chromatography (HPLC). The extraction of CsA from serum was achieved by RFF using a short diatomaceous earth column eluted with diethyl ether-n-hexane (50:50, v/v). The recovery was more than 80% at concentrations of 50-150 micrograms/l. The concentration of this compound was determined by HPLC using a conventional silica gel column with 3.3 M ammonia solution-ethanol-n-hexane (0.31:10.69:89, v/v) as eluent. Concentration calibration was made on the basis of the peak-height ratio of CsA to CsD as the internal standard. The coefficient of variation of this assay was less than 6.5% and the results were used for the therapeutic drug monitoring of CsA administered to kidney transplant patients. Measurements of the CsA concentrations in 160 serum specimens were also made by conventional radioimmunoassay (RIA) using commercial kits. The data obtained by RIA were on average 2.5 times those obtained by HPLC. Higher values in RIA were observed characteristically with patients with severe disfunction resulting from CsA hepatotoxicity. From the results, it appeared that HPLC rather than RIA provides more precise and reliable values for the concentration of this drug.     

Determination of midodrine in human plasma by high-performance liquid chromatography with fluorescence detection.

A simple and sensitive fluorometric high-performance liquid chromatographic method was developed for the determination of midodrine in human plasma. After liquid-liquid extraction from plasma, the drug and 2-phenylglycinol (internal standard) were convened into the corresponding fluorescent derivatives by reaction with 3,4-dihydro-6,7-dimethoxy-4-methyl-3-oxoquinoxaline-2-carbonyl chloride, a fluorescence derivatization reagent for amines. The derivatives were separated within 30 min on a reversed-phase column using isocratic elution with acetonitrile-methanol-water (10:30:60, v/v) and were detected spectrofluorometrically at 485 nm with excitation at 400 nm. The detection limit for midodrine was 0.3 pmol (76 pg) per mL plasma at a signal-to-noise ratio of 3.     

Collisional frequency shift with a primary frequency standard

When a hydrogen atom trapped in finite space formed by two parallel perfectly conducting plates, the transition rates can be modified. Life-time of the hydrogen 2P _1/2-state is estimated to be shorter as much as 56.3ps with a separation distance of b = 1.2μm between two plates. Although the modification is dependent on position of the atom, the life-time can be shorten or lengthen by adjusting the separation distance even for the case that the atom is placed at the center between two plates.     

Tristimulus colorimetry using a digital still camera and its application to determination of iron and residual chlorine in water samples.

Tristimulus colorimetry using a digital still camera (DSC) as a colorimeter has been developed. A photograph of a sample and standard solutions was taken simultaneously with the DSC, and it was transferred to a PC. On the PC, the colors of the sample and of the standard solutions were analyzed and L* (brightness), a* (red-green component), and b* (yellow-blue component) values were determined with laboratory-made software. A dedicated light-box containing white-color LEDs as light source was made of white acrylic to make constant exposure at each photograph. Various settings of the DSC, such as exposure mode, white balance, and so on, that affect analytical figures, were studied with determination of iron with 1,10-phenanthroline. This method was successfully applied to the determinations of iron in a river water sample and of residual chlorine in tap water samples with N,N-diethylphenylenediamine (DPD).     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.