Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007     

New poly(butylene succinate)/layered silicate nanocomposites. II. Effect of organically modified layered silicates on structure,properties, melt rheology,and biodegradability

A series of new poly(butylene succinate) (PBS)/layered silicate nanocomposites were prepared successfully by simple melt extrusion of PBS and organically modified layered silicates (OMLS). Three different types of OMLS were used for the preparation of nanocomposites: two functionalized ammonium salts modified montmorillonite and a phosphonium salt modified saponite. The structure of the nanocomposites in the nanometer scale was characterized with wide-angle X-ray diffraction and transmission electron microscopic observations. With three different types of layered silicates modified with three different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, materials properties, melt rheological behavior, and biodegradability. Interestingly, all these nanocomposites exhibited concurrent improvements of material properties when compared with pure PBS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3160–3172, 2003     

Characterization and determination of linear alkylbenzenesulfonates in environmental water samples by high-performance liquid chromatography with a hydrophilic polymer column and electrospray ionization mass spectrometric detection.

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.     

Visible-light-sensitive photocatalytic reaction on chromium-containing mesoporous silica: selective partial oxidation of propane with molecular oxygen

The photocatalytic reactivities of chromium-containing mesoporous silica molecular sieves (Cr-HMS) under visible light irradiation have been investigated. Cr-HMS involves tetrahedral chromium oxide (Cr-oxide) moieties which are highly dispersed and incorporated in the framework of molecular sieve with two terminal Cr=O groups. In the presence of propane with molecular oxygen, a partial oxidation proceeded under visible light irradiation to produce acetone and acrolein, with high selectivity, while a complete oxidation proceeded under UV light irradiation mainly to produce CO₂. The charge-transfer excited state of the tetrahedral Cr-oxide moieties plays a significant role in the photocatalytic reactions.     

Fabrication and transport properties of multiwall carbon nanotube crossroads

A multiwall carbon nanotube crossroads has been fabricated by a manipulation technique using a glass microcapillary, and the low temperature transport properties investigated. The two-terminal conductance of an individual tube shows Tomonaga–Luttinger liquid behavior G∝T^α at high temperature and dI/dV ∝V ^α at low temperature. However, no evidence of such a power-law behavior is obtained in the four-terminal conductance at the junction, where the conductance shows an almost metallic behavior ‘corrected’ by weak localization. Weak localization would essentially appear in electron states at the junctions of MWNTs.     

Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

An efficient synthesis of 5-diethoxymethylimidazole-4-carboxylate,a potential precursor for various imidazole derivatives

Anionic cycloaddition of methyl isocyanoacetate to diethoxyacetonitrile afforded methyl 5-diethoxymethylimidazole-4-carboxylate, a useful imidazole nucleus with two different functional groups.     

Fluorometric sensing of alkaline Earth metal cations by new lariat ethers having plural pyrenylmethyl groups on the electron-donating sidearms

[structure: see text] New fluorescent compounds (1), lariat ethers having plural pyrenylmethyl groups on the sidearms, were prepared, and their complexation behavior with alkaline earth metal cations was examined by fluorescence spectrometry. The pyrene excimer emission decreased accompanied with an increase in the monomer emission upon complexation with the metal ion. This finding is ascribed to the cooperative participation of one of the two sidearms in the complexation of the crown ring with the metal ion.     

Prenylated xanthones from Garcinia xanthochymus

A new prenylated xanthone, 1,3,5,6-tetrahydroxy-4,7,8-tri(3-methyl-2-butenyl)xanthone (1), was isolated from the wood of Garcinia xanthochymus together with a known xanthone, garciniaxanthone E (2). Their structures were determined by spectroscopic analysis. Compounds 1 (3 microM) and 2 (10 microM) elicited marked enhancement of nerve growth factor-mediated neurite outgrowth in PC12D cells.     

Metal-containing initiator systems. IV. Polymerization of methyl methacrylate by systems of some activated metals and organic halides

A study of the polymerization of methyl methacrylate initiated by the binary systems of some activated metals and organic halides has been made. It was found that the initiator activities of these systems were greatly dependent on the kind and the preparation or activation method of the metals (i.e., oxidation potential, surface area, and purity), and also on the kind of organic halides (i.e., bond-dissociation energy of their carbon–halogen bonds). From the kinetic studies of the polymerization at 60°C with the system reduced nickel–carbon tetrachloride, the rate of polymerization was found to be proportional to the monomer concentration and to the square root of concentration of both nickel and carbon tetrachloride at the lower concentration range of carbon tetrachloride, indicating that the system induced the radical polymerization. A similar conclusion was also obtained from the copolymerization with styrene with this system at 60°C, i.e., the resulting copolymer composition curve was in agreement with that obtained with azobisisobutyronitrile (AIBN). The apparent overall activation energy for the methyl methacrylate polymerization with this system was estimated to be 7.5 kcal/mole, which was considerably lower than that with AIBN. On the basis of the results obtained, an initiation mechanism for the polymerization with these initiator systems is presented and discussed.