Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

Tangent circle bundles admit positive open book decompositions along arbitrary links

In the present paper we generalize the divide lying in the unit disk, introduced by A'Campo, to compact, oriented, smooth surfaces, and prove a fibration theorem for generalized divides. As a consequence, we will show that, for any link L in the tangent circle bundle Y to the compact surface, there exists an additional knot K such that the link L∪K is the binding of a “positive” open book decomposition of Y.     

Likelihood estimation of soft-core interaction potentials for Gibbsian point patterns

The likelihood method is developed for the analysis of socalled regular point patterns. Approximating the normalizing factor of Gibbs canonical distribution, we simultaneously estimate two parameters, one for the scale and the other which measures the softness (or hardness), of repulsive interactions between points. The approximations are useful up to a considerably high density. Some real data are analyzed to illustrate the utility of the parameters for characterizing the regular point pattern.     

2-alkoxy and 2,2-dialkoxy nitriles from acetals and orthoesters — exchange of alkoxy into cyano group by means of cyanotrimethylsilane

Title transformation is accomplished by the catalytic action of SnCl₂ or BF₃·OEt₂ Lithio derivative of 2,2-dimethoxyacetonitrile is used as synthetic equivalent of methyl lithioformate.     

Transition metal salts-catalyzed aza-Michael reactions of enones with carbamates

Several transition metal salts were found to catalyze aza-Michael reactions of enones with carbamates efficiently. The catalytic activity was strongly dependent on the nature of the metal salts. While conventional Lewis acids such as BF(3).OEt(2), AlCl(3), or TiCl(4) showed lower activity, group 7-11 transition metal salts in higher oxidation states such as ReCl(5), Fe(ClO(4))(3).9H(2)O, RuCl(3).nH(2)O, OsCl(3).3H(2)O, RhCl(3).nH(2)O, PtCl(4).5H(2)O, or AuCl(3).H(2)O exhibited higher catalytic activity. [reaction: see text]     

Cation binding properties of crown ether-modified polyethylenimines

Crown ether-modified polyethylenimines (PEI-CR) were prepared to elucidate their cation binding efficiency and selectivity by liquid-liquid and solid-liquid extraction methods. With alkali metal cations it was found that polyethylenimines containing benzo-15-crown-5 moieties (Ia and Ib) extracted all cations examined more efficiently than their monomeric analogs, especially in the cases of K⁺ and Rb⁺ cations. The solid-liquid extraction revealed clearly that the polymers complexed with K⁺ and Rb⁺ cations according to a 1:2 cation-to-crown stoichiometry. The high selectivities of the polymers for K⁺ and Rb⁺ were interpreted in terms of the favourable conformation of the polymer chain for the formation of intramolecular 1:2 complexes. On the contrary, these polymers bound alkali earth cations less effectively with low selectivities.     

Photo-switchable ion and enzyme sensors. Photoinduced potentiometric response of glassy carbon electrode coated with polymer or polymer/enzyme dual membrane

Photo-switchable ion and enzyme sensors were fabricated by the use of glassy carbon electrode coated with nonactindoped or enzyme modified poly(vinyl chloride) (PVC) membranes. The ion sensor with nonactin-doped PVC membrane, which contained spirobenzopyran as the photosensitive dye, exhibited a potentiometric photoresponse to NH4+ ion in the solution. The dynamic range of the NH4+ ion sensor was 10(-7)--10(-3) M. Urea, adenosine, and asparagine sensors were prepared by coating the surface of the NH4+-ion sensor with urease, adenosine deaminase, and asparaginase membranes, respectively. These enzyme sensors could be used for determining the substrates at the micro mole level. The performance characteristics of these sensors were compared with those previously prepared membrane electrode sensors.     

alpha-Aminoallylation of aldehydes with ammonia: stereoselective synthesis of homoallylic primary amines

Three-component reactions of aldehydes, ammonia, and allylboronates were found to provide homoallylic primary amines in high yields with high chemo- and stereoselectivities. A two-step, one-pot, stereoselective synthesis of an uncommon alpha-amino acid, alloisoleucine, was achieved utilizing this reaction.     

Indium triflate-catalyzed vinylation of beta-ketoesters with acetylene gas

[reaction: see text]. An In(OTf)(3)-catalyzed addition of a beta-ketoester to acetylene in the presence of molecular sieves produces a alpha-vinylated ketoester in good to excellent yield. The vinylation reaction proceeds without any loss of elements in starting molecules under solvent-free conditions and allows the use of welding-grade acetylene, providing a practical method for synthetic utilization of acetylene gas.     

Structure of Aqueous Gallium(III) Bromide Solutions Over a Temperature Range 80–333 K by Raman Spectroscopy, X-ray Absorption Fine Structure, and X-ray Diffraction

The structure and complex formation of concentrated aqueous gallium(III) bromide (GaBr₃) solutions have been investigated over a temperature range 80–333 K by Raman spectroscopy, X-ray absorption fine structure (XAFS), and X-ray diffraction. The Raman spectra obtained at various [Br^?]/[Ga³⁺] molar ratios and temperatures have shown that complex formation between Ga³⁺ and Br^? occurs as a predominant species, with [GaBr₄]^? at [Ga³⁺] as high as 1～2 M (M = mol?dm ^?3) and [Br^?]/[Ga³⁺] ratios > ～2, and that cooling of the solutions favors the formation of the aqua Ga³⁺. The intermediate species were not seen in the Raman spectra. The XAFS data have revealed that the aqua complex has a sixfold coordination as [Ga(H₂O)₆]³⁺ with a Ga³⁺–H₂O distance of (1.96 ± 0.02) Å, whereas the [GaBr₄]^? complex has a Ga³⁺–Br^? distance of (2.33± 0.02) Å, and that vitrification of the aqueous GaBr₃ solution at liquid nitrogen temperature shifts the equilibrium toward the aqua complex. The X-ray diffraction data at different subzero temperatures have shown a tendency of decreasing Ga³⁺–Br^? and increasing Ga³⁺–H₂O interactions with lowering temperature, confirming the preference of aqua Ga³⁺ in the supercooled liquid state as well as in the glassy state. The Ga³⁺–H₂O distance of ～1.8 Å for the tetrahedral coordination was found in a 2.01 M gallium(III) bromide solution with a [Br^?]/[Ga³⁺] ratio of 3.7 and gradually increased to a value of 1.92 Å for octahedral geometry with decreasing temperature, suggesting that equilibrium shifts from [GaBr₄]^? to [Ga(H₂O)₆]³⁺ through intermediate species, [GaBr _n ]^(3?n)+ (n = 2 and 3). The Ga³⁺–Br^? and Br^?–Br^? distances within [GaBr₄]^? with an almost tetrahedral symmetry are (2.35± 0.02) and (3.82± 0.03) Å, respectively. The Ga³⁺ has the second hydration shell at (4.03± 0.03) Å and the hydration of Br^? is characterized with a Br^?–H₂O distance of (3.35± 0.02) Å at all temperatures investigated.