First hybrid oximehydrazonate phthalocyaninoclathrochelates: The synthesis and properties of lutetium phthalocyanine-capped cage iron(II) complexes

Ditopic oximehydrazonate iron(II) phthalocyaninoclathrochelates were synthesized by a transmetallation (a capping group exchange) reaction of the initial labile triethylantimony-capped clathrochelate iron(II) oximehydrazonates with lutetium(III) phthalocyanine as a Lewis acid. The complexes obtained were characterized using elemental analysis, PD and MALDI-TOF mass spectrometries, IR, UV–Vis, ⁵⁷Fe Mössbauer, and ¹H, ¹³C{¹H} NMR spectroscopies. An encapsulated iron(II) ion was found to be in a low-spin state. The cyclic voltammograms show oxidation and reduction waves assignable to Fe^2+/3+ couples of macrobicyclic framework and to phthalocyanine macrocycles.     

Deposition of DNA rafts on cationic SAMs on silicon [100

We demonstrate a guided self-assembly approach to the fabrication of DNA nanostructures on silicon substrates. DNA oligonucleotides self-assemble into "rafts" 8 x 37 x 2 nm in size. The rafts bind to cationic SAMs on silicon wafers. Electron-beam lithography of a thin poly(methyl methacrylate) (PMMA) resist layer was used to define trenches, and (3-aminopropyl)triethoxysilane (APTES), a cationic SAM precursor, was deposited from aqueous solution onto the exposed silicon dioxide at the trench bottoms. The remaining PMMA can be cleanly stripped off with dichloromethane, leaving APTES layers 0.7-1.2 nm in thickness and 110 nm in width. DNA rafts bind selectively to the resulting APTES stripes. The coverage of DNA rafts on adjacent areas of silicon dioxide is 20 times lower than on the APTES stripes. The topographic features of the rafts, measured by AFM, are identical to those of rafts deposited on wide-area SAMs. Binding to the APTES stripes appears to be very strong as indicated by "jamming" of the rafts at a saturation coverage of 42% and the stability to repeated AFM scanning in air.     

Rapid synthesis of gold nanorods using a one-step photochemical strategy

Rapid synthesis of gold nanorods of controlled dimensions is one of the desired aspects of nanotechnology as a result of the potential of these nanomaterials for biomedical applications. The synthesis of gold nanorods has been achieved using a photoinitiator as an instant source of ketyl radicals, which allows the synthesis of gold nanorods in minutes. This is the first report providing a one-step synthesis of nanorods of controlled dimensions in 20-30 min using photoinitiator I-2959 as a source of ketyl radicals. Furthermore, the role of UV intensity, the concentration of silver ions, and the presence of cosolvents and a cosurfactant have been studied in detail in an effort to produce nanorods with controlled dimensions in higher yields. The role of acetone in nanorod synthesis has been explored in detail, and it has been demonstrated that, for the photochemical synthesis of nanorods using a photoinitiator, acetone is not a critical component and can be replaced by other water-miscible solvents, thus the successful synthesis of nanorods in tetrahydrofuran (THF) has been demonstrated. It has also been found that a cosurfactant and an organic solvent are not required for the synthesis of nanorods; however, their presence is found to improve the monodispersity of nanorod samples, in addition to providing a higher yield.     

Photopolymerization of poly(ethylene glycol) dimethacrylates: The influence of ionic liquids on the formulation and the properties of the resultant polymer materials

The photo‐initiated polymerization of poly(ethylene glycol)dimethacrylates [PEGDM(n)] in the presence of various ionic liquids (ILs) is reported. The influence of ILs concentrations as well as of their nature upon the photopolymerization kinetics was studied in detail. It was found that according to reactive ability in bulk and in solution photopolymerization, the investigated monomers can be divided into two groups: PEGDM(1)–PEGDM(2)–PEGDM(3) and PEGDM(4)–PEGDM(7‐8). ILs slightly influence the photopolymerization of monomers from the first group and greatly change kinetics of those from the second. Such behavior was explained by the theory of “kinetically favorable or unfavorable monomer associations.” It was demonstrated that certain ILs accelerate the photopolymerization of the highest PEGDMs and offer access to the polymers derived from low reactive monomers. Relying on the obtained data, the attempt to predict the structure of the “best” ionic additive for the given monomer photopolymerization was performed and proved. Finally, the influence of both residual and specially added ILs quantities upon the properties of obtained polymer materials was investigated. It was revealed that ILs can physically interact with polymer networks increasing their thermal stability, plasticizing films, and blocks, imparting ionic conductivity equal up to 3.62 × 10^?3 Sm/cm at 25 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2388–2409, 2010     

Novel well‐defined glycopolymers synthesized via the reversible addition fragmentation chain transfer process in aqueous media

We describe here the direct synthesis of novel gluconamidoalkyl methacrylamides by reacting D ‐gluconolactone with aminoalkyl methacrylamides. The glycomonomers were then successfully polymerized via the reversible addition‐fragmentation chain transfer process (RAFT) using 4‐cyanopentanoic acid dithiobenzoate (CTP) as chain transfer agent and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as the initiator in aqueous media. Well‐defined polymers were obtained as revealed by gel permeation chromatography. Diblock copolymers were then synthesized by the macro‐CTA approach. The cationic glycopolymers were subsequently used in the formation of nanostructures via the complexation with plasmid DNA. As noted by dynamic light scattering, monodisperse nanoparticles were obtained via the electrostatic interaction of the cationic glycopolymer with DNA. The sizes of the nanoparticles formed were found to be stable and independent of pH. In vitro cell viability studies of the glycopolymers were carried out using HELA cell lines. The RAFT synthesized glycopolymers and cationic glyco‐copolymers revealed to be nontoxic. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 614–627, 2009     

Optimization of in situ derivatization SPME by experimental design for GC-MS multi-residue analysis of pharmaceutical drugs in wastewater

This paper presents the development of a procedure, which enables the analysis of nine pharmaceutical drugs in wastewater using gas chromatography‐mass spectrometry (GC‐MS) associated with solid‐phase microextraction (SPME) for the sample preparation. Experimental design was applied to optimize the in situ derivatization and the SPME extraction conditions. Ethyl chloroformate (ECF) was employed as derivatizing agent and polydimethylsiloxane‐divinylbenzene (PDMS‐DVB) as the SPME fiber coating. A fractional factorial design was used to evaluate the main factors for the in situ derivatization and SPME extraction. Thereafter, a Doehlert matrix design was applied to find out the best experimental conditions. The method presented a linear range from 0.5 to 10 μg/L, and the intraday and interday precision were lower than 16%. Applicability of the method was verified from real influent and effluent samples of a wastewater treatment plant, as well as from samples of an industry wastewater and a river.     

Ultrasound-assisted emulsification microextraction based on solidification of floating organic droplet combined with HPLC-UV for the analysis of antidepressant drugs in biological samples

Ultrasound-assisted emulsification microextraction based on the solidification of floating organic droplet combined with high-performance liquid chromatography-ultra violet (HPLC-UV) detection was applied for the extraction and determination of fluoxetine, citalopram, and venlafaxine as antidepressants drugs in biological samples. In total, 30 μL of undecanol was injected slowly into a glass-centrifuge tube containing 5 mL alkaline sample solution that was located inside the ultrasonic water bath. The formed emulsion was centrifuged and the fine droplets of solvent were floated at the top of the test tube. The test tube was then cooled in an ice bath and the solidified solvent transferred into a conical vial; it melted quickly at room temperature. Then the analysis of the extracts was carried out by high-performance liquid chromatography. Under optimal conditions, the preconcentration factors were between 174 and 316. Detection limits (LODs) of 3 μg/L were obtained and the calibration graphs were linear within the range of 10-1000 μg/L. Finally, the feasibility of the proposed method was successfully confirmed by extraction and determination of the antidepressant drugs in human urine and plasma samples in the range of microgram per liter and suitable results were obtained.