Study on Viscous Fluid Flow in Disordered-Deformable Porous Media Using Hydro-mechanically Coupled Pore-Network Modeling

Transport in Porous Media - We investigate viscous fluid flows and concurrent fluid-driven deformations in porous media. The hydro-mechanically (H-M) coupled pore-network model (PNM) is developed,...     

Celestine blue as a new indicator in electrochemical DNA biosensors

Celestine blue(CB)was introduced as a new electroactive indicator in DNA biosensors.The interaction of CB with DNA was investigated by electrochemical and spectroscopic methods.The effect of buffer kind and p H on the electrochemical behavior of CB was studied.The peak currents of CB were linearly related to DNA concentration in the range of 5.0×10~(-9) to 1.0×10~(-7)mol/L.The detection limit of this approach was 4.76×10~(-10) mol/L.Based on spectrometry data a hypochromic effect was observed in UV-Vis spectra of CB with increasing DNA concentration.The results illustrate the possible interaction mode between CB and DNA is electrostatic binding.     

Synthesis of new enantiomerically pure spirooxindolopyrrolizidines via a three-component asymmetric 1,3-dipolar cycloaddition reaction of azomethine ylides derived from isatin

An efficient, one-pot, three-component procedure for the synthesis of a small library of new chiral spirooxindolopyrrolizidines with high regio-, diastereo-, and enantioselectivity, from the 1,3-dipolar cycloaddition of azomethine ylides and optically active cinnamoyl oxazolidinone is described. The process occurs at room temperature in aqueous ethanol as a green solvent and in the absence of any Lewis acids. The oxazolidinone chiral auxiliary is removed in a non-destructive manner. The reaction mechanism is discussed on the basis of the assignment of the absolute configuration of the cycloadducts, and on theoretical calculations.     

An improved SPE method for fractionation and identification of phospholipids

This work reports an efficient and universal SPE method developed for separation and identification of phospholipids derived from complex biological samples. For the separation step, sequential combination of silica gel‐aminopropyl‐silica gel SPE cartridges is applied. This setup enables separation of phosphatidylcholine, lysophosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, phosphatidic acid, phosphatidylinositol, phosphatidylserine, cardiolipin, and sphingomyelin into four fractions according to the polarity of their headgroups. Sample acquisition of the SPE fractions is performed by a high‐resolution LC‐MS system consisting of a hybrid linear IT Fourier transform ion cyclotron resonance mass spectrometer coupled to RP‐HPLC. The unequivocal advantage of our SPE sample preparation setup is avoidance of analyte peak overlapping in the determination step done by RP‐HPLC. Overlapping phospholipid signals would otherwise exert adverse ion suppression effects. An additional benefit of this method is the elimination of polar and nonpolar (e.g. neutral lipids) contaminants from the phospholipid fractions, which highly reduces contamination of the LC‐MS system. The method was validated with fermentation samples of organic waste, where 78 distinct phospholipid and sphingomyelin species belonging to six lipid classes were successfully identified.     

Ligandless-ultrasound-assisted emulsification microextraction followed by inductively coupled plasma-optical emission spectrometry for simultaneous determination of heavy metals in water samples

In this study, a simple and efficient method of ligandless-ultrasound-assisted emulsification microextraction (LL-USAEME) followed by inductively coupled plasma-optical emission spectrometry (ICP-OES) has been developed for simultaneous extraction, preconcentration and determination of manganese, cadmium, cobalt and nickel in water samples. In the proposed approach, tetrachloroethylene was selected as extraction solvent. The effect of important experimental factors such as volume of extraction solvent, pH, sonication time, salt concentration, and temperature was investigated by using a fractional factorial design (2^5?1) to identify important factors and their interactions. In the next step, a Box-Behnken design (BBD) was applied for optimisation of significant factors. The obtained optimal conditions were: 30?µL for extraction solvent, 12 for pH, 5?min for sonication time, and 5% w/v for salt concentration. The limits of detections (LODs) for Cd(II), Co(II), Mn(II) and Ni(II) were 0.20, 0.13, 0.21 and 0.28?µg?L^?1, respectively. Relative standard deviations (RSD, C?=?200.0?µg?L^?1, n?=?9) were between 3.4–7.5% and the calibration graphs were linear in the range of 0.25 to 1000.0?µg?L^?1 for Mn, 0.5–1000.0?µg?L^?1 for Co and Ni and 1.0–250.0?µg?L^?1 for Cd. The determination coefficients (R ²) of the calibration curves for the analytes were in the range of 0.993 to 0.999. The proposed method was validated by using two certified reference materials, and also the method was applied successfully for the determination of heavy metals in different real water samples.     

A mass-conservative switching algorithm for modeling fluid flow in variably saturated porous media

Numerical solutions of flow equation in fluid content-based form or in fluid pressure head-based form are often tradeoffs between speed, accuracy, and convenience. The fluid-content based form can be solved quite rapidly with low CPU time and perfect mass balance. However, it cannot be used in saturated regions (as diffusivity function becomes infinite) and strictly becomes invalid in composite, layered, and real heterogeneous porous materials, due to singularity and discontinuity in fluid content profile. This formulation also gives misleading impression that gradient in fluid content causes the flow of fluid in porous materials, where in reality gravity and fluid pressure potential gradient produce the motion. The pressure head-based form, on the other hand, is more flexible but due to its highly nonlinear nature is much more time-consuming and produces poor global mass balance for dry initial conditions. Very fine spatial and temporal discretizations are needed to maintain mass balance property for these scenarios. The mixed form of the flow equation partially solves these issues as it maintains acceptable mass balance and is applicable to layered, heterogeneous, and composite fractured foundations. However, it is only applicable in unsaturated zones. In this study, a switching algorithm was proposed and implemented in which the mass conservative mixed form and the pressure head-based form were, respectively, used in the unsaturated and saturated zones of an initial-boundary value flow problem involving a variably saturated porous medium. The algorithm showed excellent agreement with a reference solution, obtained on a very fine spatiotemporal mesh. The simulator was then calibrated with several real-world large-scale experimental datasets. In all cases, the proposed algorithm exhibited close agreements with the experimental time–space series. The algorithm poses excellent mass balance property and can easily be used in both saturated and unsaturated regions without special treatment of fluid content discontinuities in heterogeneous and layered porous media. The proposed algorithm can also be extended to simulate multiphase and multidimensional flow problems.     

Asymptotically Nonexpansive Mappings in Modular Function Spaces

In this paper, we prove that if ρ is a convex, σ-finite modular function satisfying a Δ₂-type condition, C a convex, ρ-bounded, ρ-a.e. compact subset of L_ρ, and T: C → C a ρ-asymptotically nonexpansive mapping, then T has a fixed point. In particular, any asymptotically nonexpansive self-map defined on a convex subset of L¹(Ω, μ) which is compact for the topology of local convergence in measure has a fixed point.