Magnetic properties and microwave absorption in Ni-Zn and Mn-Zn ferrite nanoparticles synthesized by low-temperature solid-state reaction

In this work, Mn_0.7Zn_0.3Fe₂O₄ and Ni_0.7Zn_0.3Fe₂O₄ nanoparticles with super-paramagnetic properties and size distribution from 10 to 52 nm were investigated. These particles were produced by a low-temperature solid-state reaction method without the ball-milling process. The size and morphology of the nanocrystallites were determined by X-ray diffraction, transmission electron microscopy and scanning tunneling microscopy methods. Magnetic measurements such as alternating gradient field magnetometers were used to justify the super-paramagnetic properties of these nanoparticles. Their microwave absorption in the range of 8-18 GHz was studied by a vector network analyzer. Responses of the device under tests were studied. Also, the percentage of the resin, the size and thickness of the mount were determined. The band width of 2.3 GHz was obtained with reflection-loss/written-loss of −16 dB around 10.4 GHz.     

A Diastereoselective Synthesis of Functionalized Tetrahydroindeno[2′,1′,3,4]pyrido[2,1‐a]isoquinolines

An effective route to alkyl 9a‐(2,3‐dihydro‐1,3‐dioxo‐1H‐inden‐2‐yl)‐9a,14,14a,14b‐tetrahydro‐14‐oxoindeno[2′,1′:3,4]pyrido[2,1‐a]isoquinoline‐9‐carboxylates via a diastereoselective one‐pot four‐component reaction of isoquinoline and alkyl prop‐2‐ynoates with two equivalents of indane‐1,3‐dione, in aqueous MeOH at room temperature, is described.     

A magnetic multifunctional dendrimeric coating on a steel fiber for solid phase microextraction of chlorophenols

Microchimica Acta - A polyamidoamine dendrimer was synthesized, placed on magnetite nanoparticles, and the resulting material was then employed as a fiber coating for use in solid phase...     

Development of a new microelectrolysis system for in-situ electrodeposition of ultra-traces of gold prior to measurement by ETAAS

Electrodeposition is known to be suitable for separation and preconcentration of extremely low concentrations of analyte from bulk samples and is instrumentally is very simple. In this approach a new combined system was designed for in-situ electrodeposition of ultratrace levels of gold from micro samples on to a graphite furnace prior to determination by electrothermal atomic absorption spectrometry (ETAAS). Sediment samples were digested and traces of the gold content were extracted with boiling aqua regia. To prevent the highly corrosive effect of aqua regia media, the graphite tube surface was pre-coated by electrodeposition of ppm amounts of Pd prior to sample introduction. Separation of the analyte from the matrix was achieved by electrodeposition of the analyte in situ on the Pd/C surface of the furnace tube. Vanadium was also used as a modifier to stabilize the analyte from decomposition at charring temperatures. By using the proposed microelectrolysis preconcentration technique a considerable improvement in sensitivity and detection limit was achieved compared with conventional ETAAS. Characteristic masses for ED-ETAAS techniques in both nitric acid and aqua regia were reported to be m(o)=4.1 pg, with %RSD=2.9; the calculated LOD was 0.105 ppb, and typical calibration graphs for this element in nitric acid and aqua regia for both techniques were linear up to 70 microg L(-1) with about 99% recovery. Six reference sediments samples were tested by the proposed technique and by the Conv-ETAAS method. The results were in agreement with recommended values (reported by a reference laboratory using UV-visible spectrometry), demonstrating the efficiency of extraction and preconcentration of ultratrace levels of gold.     

The effect of solution temperature on crystallite size and magnetic properties of Zn substituted Co ferrite nanoparticles

In this work zinc substituted cobalt ferrite nanoparticles (Co_0.5Zn_0.5Fe₂O₄) have been synthesized by the coprecipitation method, using stable ferric, zinc and cobalt salts with sodium hydroxide, at different solution temperatures, from room temperature to 363 K. The cobalt-zinc ferrite crystalline phase, the particle size and the morphology of the resulting nanoparticles were studied by X-ray diffraction and transmission electron microscopy. The average crystallite size of each sample was calculated from the broadening of the most intense peak (3 1 1), using Scherrer's formula and the results show crystallite sizes increased from 6 to 8 nm by increasing the solution temperature from room temperature to 363 K respectively. Room temperature VSM measurements show that the prepared nanoparticles have superparamagnetic behavior and did not saturate at maximum field of 800 kA/m. The variation of AC-susceptibility of the samples with respect to temperature was measured and it was found that the blocking temperature increased from 198 to 270 K by increasing the solution temperature from room temperature to 363 K respectively. FTIR spectra of the samples have been analyzed in the frequency range 400-4000 cm⁻¹, which also confirms the results of XRD.     

Preparation and characterization of SbCl<Subscript>5</Subscript> supported on coconut shell as nanocatalyst for the synthesis of novel 2-amino-3-phenylsulfonyl-4-aryl-4<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">h</Emphasis>]chromens

Pentachlorid antimony supported on coconut shell as an efficient and novel catalyst for one-pot synthesis of 2-amino-3-phenylsulfonyl-4-aryl-4H-benzo[h]chromen through three-component condensation of \( \alpha \)- naphtol, arylaldehydes and phenylsulfonyl (acetonitrile). Nanocatalyst pentachloride antimony supported on coconut shell was manufactured and characterized by FT-IR, TGA/DTG, XRD, EDX, FESEM and TEM techniques. The present method has advantages such as high activity, high reaction rate, recoverability of nanocatalyst, a simple experimental procedure, without any using of hazardous organic solvents under green conditions.     

Solvent-assisted intramolecular proton transfer in thiopurinol: application of M06-2X functional

All available conformers of tisopurine as an important pharmaceutical molecule are optimized and frequency calculations calculated at M06-2X/6-311++G(2d,2p) level of theory. These conformers are classified in 22 different tautomers, tautomer Z showing the most stable tautomer in the gas phase. Effects of four different solvents on the most stable conformer of each tautomer is calculated. Solvents cause stabilization of all conformers and relative solvent stabilization is as follows: water > DMSO > acetone > toluene. Energy profile for such stabilization is illustrated and mechanism of proton transfer studied at the same level of theory. Solvent-assisted proton transfer performed when water and methanol used as solvents. Results indicate that explicit solvent effect has much more stabilization on tautomerization processes compared to implicit solvent effect.     

Trace determination of antifungal drugs in biological fluids through a developed approach of hydrogel-based spin-column micro-solid-phase extraction followed by LC-MS/MS analysis

In the present research, a blended polyacrylamide-chitosan hydrogel was synthesized. For the first time, the prepared sorbent was efficiently employed in a hydrogel-based spin-column setup as a promising format. The proposed method was applied for monitoring the trace amounts of ketoconazole, clotrimazole, and miconazole in blood samples. Effective adsorption and desorption parameters were optimized using a central composite design and the one-variable-at-a-time method. Under the optimal conditions, the calibration curves were linear in the range of 15.0–1000.0, 1.0–1000.0, and 2.0–1000.0 ng mL^–1 for ketoconazole, clotrimazole, and miconazole, respectively, along with intra- and interday precision less than 8.4%. Limits of detection were obtained between 0.2 and 5.0 ng mL^–1. The preconcentration factors were found in the range of 5.9–7.8. The introduced method was successfully applied for micro-solid-phase extraction of trace amounts of target antifungal drugs in blood samples, followed by liquid chromatography-tandem mass spectrometry. Satisfactory relative recoveries of 94.5–103.5% were obtained, implying method reliability. Overall, the proposed method provides good accuracy and repeatability, high reusability, and good applicability to determine antifungal drugs in complex biological matrices.     

The linear syzygy graph of a monomial ideal and linear resolutions

Czechoslovak Mathematical Journal - for each squarefree monomial ideal I ? S = k[x1, …, xn], we associate a simple finite graph GI by using the first linear syzygies of I. The nodes of...