A dried blood spot assay with HPLC–MS/MS for the determination of larotrectinib in mouse blood and its application to a pharmacokinetic study

Larotrectinib is a first-generation tropomyosin kinase inhibitor, approved for the treatment of solid tumors. In this paper, we present a validated dried blood spot (DBS) method for the quantitation of larotrectinib from mouse blood using HPLC–MS/MS, which was operated under multiple reaction monitoring mode. To the DBS disc cards, acidified methanol enriched with internal standard (IS; enasidenib) was added and extracted using tert-butyl methyl ether as an extraction solvent with sonication. Chromatographic separation of larotrectinib and the IS was achieved on an Atlantis dC₁₈ column using 10 mm ammonium formate–acetonitrile (30:70, v/v) delivered at a flow-rate of 0.80 ml/min. Under these optimized conditions, the retention times of larotrectinib and the IS were ~0.93 and 1.37 min, respectively. The total run time was 2.50 min. Larotrectinib and the IS were analyzed using positive ion scan mode and parent–daughter mass to charge ion (m/z) transitions of 429.1 → 342.1 and 474.1 → 267.1, respectively, were used for the quantitation. The calibration range was 1.06–5,080 ng/ml. No matrix effect or carryover was observed. Hematocrit did not influence DBS larotrectinib concentrations. All of the validation parameters met the acceptance criteria. The applicability of the validated method was shown in a mouse pharmacokinetic study.     

A microspectroscopic study of the electronic homogeneity of ordered and disordered Sr2FeMoO6

Disordered Sr₂FeMoO₆ shows a drastic reduction in saturation magnetization compared to highly ordered samples, moreover magnetization as a function of the temperature for different disordered samples shows qualitatively different behaviours. We investigate the origin of such diversity by performing spatially resolved photoemission spectroscopy on various disordered samples. Our results establish that e_xtensive electronic inhomogeneity, arising most probably from an underlying chemical inhomogeneity in disordered samples, is responsible for the observed magnetic inhomogeneity. It is further pointed out that these inhomogeneities are connected with composition fluctuations of the type Sr₂Fe_1+x Mo_1-x O₆ with Fe-rich (x > 0) and Mo-rich (x < 0) regions. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Magnetism and magneto-transport studies in sonochemically prepared amorphous Co100−xPtx nano alloys

Bulk amorphous Co_(100−x)Pt_x (0≤x≤50) nano-alloys have been synthesized using high frequency ultrasound, displaying single domain (4-5 nm) behavior wherein weakly exchange-coupled particles lead to a field-dependent resistivity behavior. Magneto-resistivity is correlated to the order-disorder parameter in these powder compacts. The plot of Δρ/ρ₀ as a function of reduced magnetization indicates that all the systems are weakly exchange coupled.     

Azine bridged silver coordination polymers: Powder X-ray diffraction route to crystal structure determination of silver benzotriazole

In continuation of our interest in solid-state structures of silver complexes of photographic importance, the structure for silver benzotriazole (AgBZT), has now been obtained. The preferred method for solving crystal structures is via single-crystal X-ray diffraction (XRD). However, for some materials, growing single crystals of appropriate size and quality is often difficult or even impossible. AgBZT is an example of such a silver complex with poor solubility. The usual routes to preparing single crystals using recrystallization from a cooperating solvent resulted in polycrystalline powder samples. We propose a crystal structure for AgBZT, solved from synchrotron X-ray powder diffraction data, using a direct-space Monte Carlo simulated annealing approach. AgBZT crystals are monoclinic, (P2₁/c), with unit cell dimensions, a=14.8052(3) Å, b=3.7498(4) Å, c=12.3495(12) Å, and β=114.200(6)°. The AgBZT complex is constructed from all three of the Benzotriazole (BZT) nitrogens bonding to a separate silver atom. As a consequence of this bonding mode, the structure is a highly cross-linked, coordination polymer.     

Determination of the elemental distribution in a sample using neutron induced gamma-ray emission tomography

The factors that affect accurate, quantitative results to be obtained by neutron induced gamma-ray emission tomography are stated. The technique, which is a combination of neutron activation analysis with computerised gamma-ray emission tomography, would be enhanced by the use of multiple detector assemblies, in geometrical configurations, which simultaneously record the gamma-rays emitted and improve detection efficiency. Developments in the past few years in positron emission tomography (PET) where scanners made of single scintillation block detectors, cut into smaller segments, to form individual crystal detector elements and packed in ring around the radioactive object, are discussed. The coincident detection efficiency for annihilation photons and cascade gamma-rays for such systems are considered and the possibilities of carrying out NIGET with coincident gamma-ray tomography are explored whilst indicating some of the limitations. This is an area which requires further, intense investigation and has an impact on a wide range of applications, particularly in the biomedical field.     

Steric effects of substituted quinolines on lithium coordination geometry

The X-ray crystal structures of a series of lithium quinolates – lithium 8-hydroxyquinolinate (Liq), lithium 2-methyl-8-hydroxyquinolinate (MeLiq), and 2-phenyl-8-hydroxquinolinate (PhLiq), are compared. The substitution at the 2-position of the 8-hydroxyquinoline ligand has significant impact on the aggregation of the lithium complex in the crystalline state. Liq and MeLiq molecules crystallize as hexamers, whereas PhLiq crystallizes as a tetramer. The possible influence of crystal-packing forces on the preferred cluster structure was probed using density functional theory calculations on a systematically varied set of Liq, MeLiq, and PhLiq clusters. For Liq and MeLiq, the observed structures match the most stable computed structures. In the PhLiq case, the observed tetrameric structure is computed to be less stable (+1.2 kcal/mol/monomer) than the lowest energy structure, a hexamer. In this case, solid-state effects probably outweigh small differences in cluster stability.     

Optimization of experimental parameters in single-drop microextraction-gas chromatography-mass spectrometry for the determination of periodate by the Malaprade reaction, and its application to ethylene glycol

The aim of present work was to optimize the experimental parameters in single drop microextraction under solution immersion (SDME) and headspace (HS-SDME) extraction modes for the determination of periodate using guaifenesine [3-(2′-methoxyphenoxy)-1,2-propane diol] and norephedrine (phenylpropanolamine) as new and alternative reagents for the Malaprade reaction. The reactions were complete within 5 min resulting in the formation of 2-(2′-methoxyphenoxy)-acetaldehyde and benzaldehyde, respectively. SDME/HS-SDME of oxidation products with 2 μl of anisole or 1 μl of toluene, respectively, has permitted the determination of periodate at μg l⁻¹ concentration levels. The results indicated that HS-SDME (range 0.01-10 mg l⁻¹, r² = 0.9990; limit of detection 1.55 μg l⁻¹) was more sensitive than SDME (range 0.05-50 mg l⁻¹, r² = 0.9984; limit of detection 3.42 μg l⁻¹), and was inexpensive, rapid and convenient. Tolerance of excess of iodate has permitted the application of this method in the determination of ethylene glycol in motor oil; the average recovery on spiked sample was 98.6% with R.S.D. of 4.2%.     

Water-Mediated Synthesis of Benzazole and Thiourea Motifs by Reacting Naturally Occurring Isothiocyanate with Amines

An efficient, green, and facile method has been developed for the synthesis of benzazole and thiourea analogues from naturally occurring erucin in moderate to good yields. The reaction was carried out in water without using any metal catalyst or base. The present method tolerated the various functional groups on aromatic rings and also applicable for other isothiocyanates.     

Validated liquid chromatography–tandem mass spectrometry method for simultaneous quantitation of bendamustine and copanlisib in mouse plasma: Application to a pharmacokinetic study in mice

In this study, we report the development and validation of an LC–tandem mass spectrometry method for the simultaneous quantitation of bendamustine and copanlisib in mouse plasma as per the US FDA regulatory guidelines. The sample processing involves extraction of bendamustine and copanlisib along with internal standard (IS; warfarin) from 50 μL mouse plasma using a liquid–liquid extraction method. The chromatographic separation of bendamustine, copanlisib and the IS was achieved on an Atlantis dC₁₈ column using an isocratic mobile phase (5 mM ammonium acetate:methanol, 20:80 v/v). Bendamustine, copanlisib and the IS eluted at 0.88, 1.39 and 0.74 min, respectively, with a total run time of 2.5 min. The calibration curve ranged from 3.99–2996 and 4.33–3248 ng/mL for bendamustine and copanlisib, respectively. Inter- and intra-day precision and accuracy, stability in processed samples and upon storage, dilution integrity and incurred sample reanalysis were investigated for both the analytes. The intra- and inter-day precisions were in the ranges of 2.01%–5.05% and 2.74%–6.13% and 1.98%–7.64 and 8.62%–9.04% for bendamustine and copanlisib, respectively. Stability studies showed that both analytes were stable on bench top for 6 h, in auto-sampler for 24 and at −80°C for 30 days. The validated method was successfully applied to a pharmacokinetic study in mice.     

A Robust numerical approach for singularly perturbed time delayed parabolic partial differential equations

We consider the numerical solution of a initial boundary value problem with a time delay. The problem under consideration is singularly perturbed from the mathematical perspective. Assuming that the coefficients of the differential equation are smooth, we construct and analyze the finite difference method whose solutions converge pointwise at all points of the domain independently of the singular perturbation parameter. The method permits its extension to the case of adaptive meshes, which may be used to improve the solution. Numerical examples are presented to demonstrate the effectiveness of the method. The convergence obtained in practice satisfies the theoretical predictions.