Mono-Aryl/Alkylthio-Substituted (Hetero)acenes of Exceptional Thermal and Photochemical Stability by the Thio-Friedel–Crafts/Bradsher Cyclization Reaction

The highly substituted mono-aryl/alkylthio-(hetero)acenes prepared in this study have been found to be thermally more stable (T_decomp.=331–354 °C) than the known di-aryl/alkylthio-substituted acenes by an average of 25 °C. They are also much more photostable at 254 and 365 nm (in both argon and air) than the parent anthracene and other reported anthracenes. The most photostable aryl/alkylthio-anthracenes at 254 nm were found to be 60–70 (in air) and 130 (in argon) times more stable in solution than the unsubstituted anthracene, and much more stable than known EDG/EWG-substituted anthracenes (EDG=electron-donating group, EWG=electron-withdrawing group) with an extended aromatic core. Furthermore, the acenes showed significantly higher photostability at 365 nm in both air and argon. The anthracenes were obtained by the novel thio-Friedel–Crafts/Bradsher cyclization reaction of hitherto unknown [o-(1,3-dithian-2-yl)aryl](aryl)methyl thioethers. The developed approach provides a general access to mono-aryl/alkylthio-substituted (hetero)acene frameworks containing at least three fused (hetero)aromatic rings. The characteristic feature of this approach, which leads to highly substituted acenes, is that the substituents, unlike in other methods, may be introduced at an early stage of the synthesis. DFT and TD-DFT calculations confirmed the stabilizing role of the aryl/alkylthio substituent in the mono-aryl/alkylthio-substituted anthracenes, which are the most stable anthracenes prepared to date. Their high photostability is mainly due to the quenching of singlet oxygen by the acene and the quenching of the acene S₁ state by molecular oxygen.     

Tracing Possible Structural Asymmetry of Silica Gel Used for Precoating Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - We have previously described unexpected two-dimensionality in the thin-layer chromatographic separation of pairs of enantiomers of...     

The mass spectra of 2- and 4-monohydroxy- and 2, 4-dihydroxy-1, X-naphthyridines

The mass spectra of 2-and 4-monohydroxy-and 2, 4-dihydroxy-1, 5-, -1, 6-, -1, 7-and 1, 8-naphthyridines are reported. Fragmentation mechanisms are proposed and discussed.     

Thermochemistry of interactions of Na+ with benzo-15-crown-5 ether in acetonitrile-water mixtures at 298.15 K

Enthalpies of dissolution of benzo-15-crown-5 ether (B15C5) in mixtures of acetonitrile with water and in solutions of NaI and NaBPh₄ (I=0.05 mol dm^–3) in these mixtures were measured at 298.15 K. From the obtained results and appropriate literature data, the thermodynamic functions of B15C5/Na⁺ complex formation in acetonitrile-water mixtures were determined. The enthalpies of transfer of the complex B15C5/Na⁺ from pure acetonitrile to the examined mixtures were calculated and are discussed.     

Determination of traces of cobalt in the presence of nioxime and cetyltrimethylammonium bromide by adsorptive stripping voltammetry

A sensitive method of Co(II) determination by adsorptive stripping voltammetry is presented. The method exploits the enhancement of cobalt peak current observed in the system Co(II)-nioxime-cetyltrimethylammonium bromide-piperazine-N,N′-bis(2-ethanesulfonic acid). The calibration plot for an accumulation time of 60 s is linear from 5 × 10⁻¹¹ to 3 × 10⁻⁹ mol L⁻¹. The relative standard deviation is 3.8% for Co(II) determination at concentration 1 × 10⁻⁹ mol L⁻¹. The detection limit is 1.7 × 10⁻¹¹ mol L⁻¹. The validation of the method is performed by the analyses of certified reference materials and comparing the result of Co(II) determination in river water sample by the proposed method with those obtained by ET AAS. The main advantage of this new system is the micro-trace Co(II) determination by adsorptive stripping voltammetry, as compared to those described before, a low concentration of the supporting electrolyte used, and so commercially available reagents without additional purification can be used.     

Application of the DFT Theory to Study Cobalamin Complexes

The aim of present study is to select the best methodology in the frame of the Density Functional Theory (DFT), which may be employed to study the cobalamin complexes. Our discussion is limited to two approaches, one in which hybrid B3LYP and UB3LYP functionals are used, and the second in which geometry parameters are calculated within LDA-VWN functional, and energies of the investigated systems are computed within RPBE functional. Results of performed calculations show that both methodologies can be successfully applied to study cobalamin derivatives. Probably because of the small ligand binding energies in the studied complexes, the B3LYP and UB3LYP functionals may be used only to predict the pattern of changes in the binding energies. The use of the RPBE functional, originally parameterized to reproduce in a proper way the chemisorption energies of the small molecules on the metallic surfaces, allows to improve their values so as they fit into experimental data. Geometry parameters of the investigated complexes computed within both approaches are in good agreement with the experimental values. Interatomic distances are a little overestimated while calculated within both hybrid functionals, what is in contrast to VWN functional results. The latter, in general, gives shorter distances as observed experimentally.     

SINGLE- and DOUBLE-STRAND BREAK FORMATION IN DOUBLE-STRANDED DNA UPON NANOSECOND LASER-INDUCED PHOTOIONIZATION

Double-stranded (ds) calf thymus DNA (0.4 mM), excited by 20 ns laser pulses at 248 nm, was studied in deoxygenated aqueous solution at room temperature and pH 6.7 in the presence of a sodium salt (10 mM). The quantum yields for the formation of hydrated electrons (phi c-), single-strand breaks (phi ssb) and double-strand breaks (phi dsb) were determined for various laser pulse intensities (IL). phi c- and phi ssb increase linearly with increasing IL; however, phi ssb has a tendency to reach saturation at high IL (greater than 5 X 10(6) Wcm-2). The ratio phi ssb/phi c-, representing the number of ssb per radical cation, is about 0.08 at IL less than or equal to 5 X 10(6) Wcm-2. For comparison, the number of ssb per OH radical reacting with dsDNA is 0.22. On going from argon to N2O saturation, phi ssb and phi dsb become larger by factors of approximately 5 and 10-15, respectively. This enhancement is produced by attack on DNA bases by OH radicals generated by N2O-scavenging of the photoelectrons. While phi ssb is essentially independent of the dose (Etot), phi dsb depends linearly on Etot in both argon- and N2O-saturated solutions. The linear dependence of phi dsb implies a square dependence of the number of dsb on Etot. This portion of dsb formation is explained by the occurrence of two random ssb, generated within a critical distance (h) in opposite strands. For both argon- and N2O-saturated solutions h was found to be of the order of 40-70 phosphoric acid diester bonds. On addition of electron scavengers such as 2-chloroethanol (or N2O plus t-butanol), phi dsb is similar to that in neat, argon-saturated solutions. Thus, hydrated electrons are not involved in the chemical pathway leading to laser-pulse-induced dsb of DNA.     

Mathematical models of solute retention in gas chromatography as sources of thermodynamic data. Part III. Alkylbenzenes as the test analytes

Direct determination of thermodynamic data has always been a complicated and troublesome experimental task. Gas chromatography is among long-established working tools well suited to performing this particular task indirectly. Our own results were first presented in the papers by Ciazynska-Halarewicz and Kowalska (1,2), and this article is Part III in the series. Present experiments are carried out on low- and medium-polarity stationary phases at five different temperatures ranging from 323K to 423K. They enable determination of two thermodynamic properties of the alkylbenzenes, molar enthalpy of vaporization (DeltaH(vap)), and the chemical potential of partitioning of the methylene group between the two phases of the chromatographic system (Delta micro (p(-CH2-))). These properties are obtained from eight nonempirical models and, as is apparent from their derivation (3-7), the terms of the models have clearly defined physical meaning, which enables calculation of thermodynamic properties.     

Determination of “solvent” concentration in “chromatographic solutions” on the cellulose sorbents

An attempt was undertaken to furnish an entirely quantitative characteristics to the thermodynamic model of the chromatographic system presented in (2). The attempt proved to be successful and one managed to establish simultaneously a new method enabling direct determination of the hydrogen-bond enthalpy from the PC experimental results.     

Preparation,lithiation and transformation of N-(benzotriazol-1-ylmethyl) heterocycles

Indole, carbazole, pyrrole, imidazole, benzimidazole, 2-methyl- and 2-phenylbenzimidazole, and 1, 2, 4-triazole have each been converted into their N-(benzotriazol-1-ylmethyl) derivatives. The pyrrole, indole, and carbazole adducts undergo smooth lithiation at the inter-ring methylene group and subsequent reaction there with electrophiles. For the imidazole, benzimidazole, and triazole systems, lithiations at other molecular positions competed.