Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Enhancement of Magneto-Optic Effect in Optical Isolator with Semiconductor Guiding Layer by Selective Oxidation of AlInAs

Selective oxidation of an AlInAs layer was investigated for enhancement of magneto-optic effect in an optical isolator. Twelve times nonreciprocal phase shift enhancement was estimated from a measured AlInAs-oxide refractive index.     

Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

Chromium- and tungsten-triggered valence isomerism of cis-1-acyl-2-ethynylcyclopropanes via [3,3]sigmatropy of (2-acylcyclopropyl)vinylidene-metal intermediates.

The reaction of cis vicinal acetylethynylcyclopropanes 1 with a catalytic amount of M(CO)5(THF) (M = Cr or W) in the presence of Et3N at room temperature gave ortho-substituted phenols 7 in good yields as valence isomerized products. In the absence of Et3N the reactions did not work at all. The reaction of a cyclopropane having an ester or an amide instead of an acetyl moiety with M(CO)5(THF) did not take place, whereas an ethynylvinylcyclopropane gave a mixture of 1- and 2-substituted 1,3,5-cycloheptatrienes. These valence isomerization reactions are assumed to proceed via the formation of vinylidene-metal intermediates 2 from terminal alkynyl moieties followed by [3,3]sigmatropy of 2 to give seven-membered carbene complexes 3.     

Performance of throughout in-capillary derivatization capillary electrophoresis employing an on-line sample and run buffer loading device

We report on the effect on performance of varying the length of the capillary during throughout in-capillary derivatization (TICD) capillary electrophoresis (CE). Performance was evaluated by on-line coupling with a sample and CE runbuffer loading device that was newly introduced for this study. The device was assembled with a low cost using two 5 mm inner diameter (ID) disposable polyethylene syringes. First, a sequence was manually formed consisting of a 200 microL run buffer solution plug, a 100 microL sample plug and another 200 microL run buffer solution plug. Each plug was separated from its neighbor by a 100 microL air plug. When each plug reached the injection point where both a platinum-wire anode and the end of the separation capillary tube were located, 340 V/cm separation voltage (electrophoresis voltage) and 34 V/cm injection voltage were applied to the capillary for 3 s. Then the analytes were derivatized during migration in 50 microm ID capillaries filled with 2 mM o-phthalaldehyde (OPA)/N-acetylcysteine (NAC) in a 20 mM phosphate-borate buffer (pH 10), followed by separating and detecting of OPA derivatives by absorbance of 340 nm. Derivatization, separation, and detection were performed systematically using capillaries which varied in length from 5 to 80 cm. In the case of TICD-CE of a mixture containing 1 mM aspartic acid (Asp) and 20 mM m-nitorophenol (MNP) as a test solution, it was determined that peak area and peak width ratios of Asp to MNP did not depend on capillary length. Enantiomeric separations of DL-alanine (Ala) and Asp were examined using a run buffer consisting of a 45 microM beta-cyclodextrin (CD)-2 mM OPA/NAC-20 mM phosphate-borate buffer (pH 10). Even though the resolution of these enantiomeric pairs decreased with decreasing capillary length, as expected, the peaks corresponding to both enantiomeric amino acids were identified even when a 5 cm capillary was used. An 8-component amino acid mixture was also tested with 5 cm and 10 cm capillaries.     

Four new cycloartane glycosides from Aquilegia vulgaris

Four new cycloartane glycosides, named aquilegiosides G-J, were isolated from the dried aerial parts of Aquilegia vulgaris. Their structures were determined by spectroscopic analysis and chemical evidence.     

Studies on the mechanism of 1,2-dihydropyrazin-2-one ring formation from dipeptidyl chloromethyl ketone and its chemical properties: immediate deamination during catalytic hydrogenation

1,2-Dihydropyrazin-2-one derivatives, which have two aminoalkyl groups at the positions 3 and 6, were found to be efficient tools for the construction of potent, selective and long-acting opioid mimetics. During the course of preparation, we found that the catalytic hydrogenation of 3,6-bis(benzyloxycarbonylaminomethyl)-5-methyl-1,2-dihydropyrazin-2-one to remove the benzyloxycarbonyl groups resulted in a side reaction. By MS and NMR studies and by preparation of additional 1,2-dihydropyrazin-2-one derivatives, the structure of the by-product was identified as 3-aminomethyl-5,6-dimethyl-1,2-dihydropyrazin-2-one. Preparation of additional compounds substituted with deuterium provided us with sufficient information to confirm the structure of the product and to support a cyclization mechanism in its formation.     

Supramolecular chirogenesis in zinc porphyrins: interaction with bidentate ligands,formation of tweezer structures,and the origin of enhanced optical activity

The complexation behavior, binding properties, and spectral parameters of supramolecular chirality induction in the achiral host molecule, syn (face-to-face conformation) ethane-bridged bis(zinc porphyrin), upon interaction with chiral bidentate guests (diamines and amino alcohols) have been studied by means of UV-vis, CD, fluorescence, (1)H NMR, and ESI MS techniques. It was found that the guest structure plays a decisive role in the chirogenesis pathway. The majority of bidentate ligands (except those geometrically unsuitable) exhibit two major equilibria steps: the first guest ligation leading to formation of the 1:1 host-guest tweezer structure (K(1)) and the second guest molecule ligation (K(2)) forming the anti bis-ligated species (1:2). The second ligation is much weaker (K(1) > K(2)) due to the optimal geometry and stability of the 1:1 tweezer complex. The enhanced conformational stability of the tweezer complex ensures an efficient chirality transfer from the chiral guest to the achiral host, consequently inducing a remarkably high optical activity in the bis-porphyrin.