Structural and spectroscopic trends in mononuclear arylchalcogenolato-palladium(II) and -platinum(II) complexes: Crystal structures of [M(TeAr)2(dppe)] {M = palladium, platinum; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane}

A series of mononuclear [M(EAr)₂(dppe)] [M = Pd, Pt; E = Se, Te; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane] complexes has been prepared in good yields by the reactions of [MCl₂(dppe)] and corresponding ArE⁻ with a special emphasis on the aryltellurolato palladium and -platinum complexes for which the existing structural information is virtually non-existent. The complexes have crystallized in five isomorphic groups: (1) [Pd(SePh)₂(dppe)] and [Pt(SePh)₂(dppe)], (2) [Pd(TePh)₂(dppe)] and [Pt(TePh)₂(dppe)], (3) [Pd(SeTh)₂(dppe)], (4) [Pt(SeTh)₂(dppe)] and [Pd(TeTh)₂(dppe)], and (5) [Pt(TePh)₂(dppe)]. In addition, solvated [Pd(TePh)₂(dppe)] · CH₃OH and [Pd(TeTh)₂(dppe)] · 1/2CH₂Cl₂ could be isolated and structurally characterized. The metal atom in each complex exhibits an approximate square-planar coordination. The Pd-Se, Pt-Se, Pd-Te, and Pt-Te bonds span a range of 2.4350(7)-2.4828(7) Å, 2.442(1)-2.511(1) Å, 2.5871(7)-2.6704(8) Å, and 2.6053(6)-2.6594(9) Å, respectively, and the respective Pd-P and Pt-P bond distances are 2.265(2)-2.295(2) Å and 2.247(2)-2.270(2) Å. The orientation of the arylchalcogenolato ligands with respect to the M(E₂)(P₂) plane has been found to depend on the E-M-E bond angle. The NMR spectroscopic information indicates the formation of only cis-[M(EAr)₂(dppe)] complexes in solution. The trends in the ³¹P, ⁷⁷Se, ¹²⁵Te, and ¹⁹⁵Pt chemical shifts expectedly depend on the nature of metal, chalcogen, and aryl group. Each trend can be considered independently of other factors. The ⁷⁷Se or ¹²⁵Te resonances appear as second-order multiplets in case of palladium and platinum complexes, respectively. Spectral simulation has yielded all relevant coupling constants.     

Rational Development of Guanidinate and Amidinate Based Cerium and Ytterbium Complexes as Atomic Layer Deposition Precursors: Synthesis,Modeling, and Application

Owing to the limited availability of suitable precursors for vapor phase deposition of rare-earth containing thin-film materials, new or improved precursors are sought after. In this study, we explored new precursors for atomic layer deposition (ALD) of cerium (Ce) and ytterbium (Yb) containing thin films. A series of homoleptic tris-guanidinate and tris-amidinate complexes of cerium (Ce) and ytterbium (Yb) were synthesized and thoroughly characterized. The C-substituents on the N-C-N backbone (Me, NMe₂, NEt₂, where Me=methyl, Et=ethyl) and the N-substituents from symmetrical iso-propyl (iPr) to asymmetrical tertiary-butyl (tBu) and Et were systematically varied to study the influence of the substituents on the physicochemical properties of the resulting compounds. Single crystal structures of [Ce(dpdmg)₃] 1 and [Yb(dpdmg)₃] 6 (dpdmg=N,N'-diisopropyl-2-dimethylamido-guanidinate) highlight a monomeric nature in the solid-state with a distorted trigonal prismatic geometry. The thermogravimetric analysis shows that the complexes are volatile and emphasize that increasing asymmetry in the complexes lowers their melting points while reducing their thermal stability. Density functional theory (DFT) was used to study the reactivity of amidinates and guanidinates of Ce and Yb complexes towards oxygen (O₂) and water (H₂O). Signified by the DFT calculations, the guanidinates show an increased reactivity toward water compared to the amidinate complexes. Furthermore, the Ce complexes are more reactive compared to the Yb complexes, indicating even a reactivity towards oxygen potentially exploitable for ALD purposes. As a representative precursor, the highly reactive [Ce(dpdmg)₃] 1 was used for proof-of-principle ALD depositions of CeO₂ thin films using water as co-reactant. The self-limited ALD growth process could be confirmed at 160 °C with polycrystalline cubic CeO₂ films formed on Si(100) substrates. This study confirms that moving towards nitrogen-coordinated rare-earth complexes bearing the guanidinate and amidinate ligands can indeed be very appealing in terms of new precursors for ALD of rare earth based materials.     

Cobalt complexes of a selenium diimide and a tellurium diimide dimer

[CoCl₂{N,N′-Te₂(N^tBu)₄}] (1) was obtained in good yields by the reaction of equimolar amounts of (^tBu)NTe(μ-N^tBu)₂TeN(^tBu) and CoCl₂ in toluene under an argon atmosphere. The crystal structure of 1·CH₂Cl₂ showed that the dimeric tellurium diimide ligand is N,N′-chelated to cobalt. The related reaction of Se(N^tBu)₂ and CoCl₂ affords a green product tentatively identified as a 1:1 adduct [CoCl₂{N,N′-Se(N^tBu)₂}] (CHN analysis). However, recrystallization from thf produces the ion-separated complex [Co₂(μ-Cl)₃{N,N′-Se(N^tBu)₂}₂(thf)₂][CoCl₃{NH₂(^tBu)}]·1½thf (2·1½thf), in which the monomeric selenium diimide ligand is N,N′-chelated to cobalt in the cation. A pathway for the formation of 2 from [CoCl₂{N,N′-Se(N^tBu)₂}] in thf is proposed.     

Techniques of differential scanning calorimetry for quantification of low contents of amorphous phases

Differential scanning calorimetry (DSC) is one of the most frequently used techniques for analyzing small concentrations of amorphous phases in a crystalline matrix. In recent years novel enhanced DSC approaches have been intensively looked for to improve parameters such as sensitivity, accuracy, and detection limit of the technique. Low levels of amorphous phases can be quantitatively determined in DSC by measuring the heat capacity change associated with the glass transition. In this short review the potentials provided by the HyperDSC and StepScan DSC techniques are discussed. Examples illustrate the advantages and disadvantages of the techniques and compare their abilities to detect small glass transitions and determine low contents of amorphous phases in samples which are mostly crystalline.     

Characterisation of proanthocyanidin aglycones and glycosides from rose hips by high-performance liquid chromatography-mass spectrometry, and their rapid quantification together with vitamin C

Fifteen individual proanthocyanidin aglycones and 19 glycosides, together with a complex mixture of chromatographically non-separated tetra- to octameric proanthocyanidin glycosides were detected--the non-separated glycosides being novel natural products--and characterised from dog rose hips using high-performance liquid chromatography-electrospray ionisation mass spectrometry (HPLC-ESI-MS). Along with these phenolics, a 50% aqueous ethanol extract of rose hips was found to contain high levels of Vitamin C. A simple and rapid HPLC method assisted by diode array detection for the estimation of the total concentration of proanthocyanidin aglycones and glycosides, as well as Vitamin C, in rose hip extracts was developed.     

UV photolysis products of propiolic acid in noble-gas solids

Photolysis (193 nm) of propiolic acid (HCCCOOH) was studied with Fourier transform infrared spectroscopy in noble-gas (Ar, Kr, and Xe) solid matrixes. The photolysis products were assigned using ab initio quantum chemistry calculations. The novel higher-energy conformer of propiolic acid was efficiently formed upon UV irradiation, and it decayed back to the ground-state conformer on a time scale of approximately 10 min by tunneling of the hydrogen atom through the torsional energy barrier. In addition, the photolysis produced a number of matrix-isolated 1:1 molecular complexes such as HCCH...CO2, HCCOH...CO, and H2O...C3O. The HCCH...CO2 complex dominated among the photolysis products, and the computations suggested a parallel geometry of this complex characterized by an interaction energy of -9.6 kJ/mol. The HCCOH...CO complex also formed efficiently, but its concentration was strongly limited by its light-induced decomposition. In this complex, the most probable geometry was found to feature the interaction of carbon monoxide with the OH group via the carbon atom, and the computational interaction energy was determined to be -18.3 kJ/mol. The formation of the strong H2O...C3O complex (interaction energy -21 kJ/mol) was less efficient, which might be due to the inefficiency of the involved radical reaction.     

Packing dimension and Ahlfors regularity of porous sets in metric spaces

Let X be a metric measure space with an s-regular measure μ. We prove that if A ì X{A\subset X} is r{\varrho} -porous, then dim_p(A) ￡ s-cr^s{{\rm {dim}_p}(A)\le s-c\varrho^s} where dim_p is the packing dimension and c is a positive constant which depends on s and the structure constants of μ. This is an analogue of a well known asymptotically sharp result in Euclidean spaces. We illustrate by an example that the corresponding result is not valid if μ is a doubling measure. However, in the doubling case we find a fixed N ì X{N\subset X} with μ(N) = 0 such that dim_p(A) ￡ dim_p(X)-c(log\tfrac1r)^-1r^t{{\rm {dim}_p}(A)\le{\rm {dim}_p}(X)-c(\log \tfrac1\varrho)^{-1}\varrho^t} for all r{\varrho} -porous sets A ì X\ N{A \subset X{\setminus} N} . Here c and t are constants which depend on the structure constant of μ. Finally, we characterize uniformly porous sets in complete s-regular metric spaces in terms of regular sets by verifying that A is uniformly porous if and only if there is t < s and a t-regular set F such that A ì F{A\subset F} .     

The [U2F12]2− Anion of Sr[U2F12]

The D_2h‐symmetric dinuclear complex anion [U₂F₁₂]^2? of pastel green Sr[U₂F₁₂] shows a hitherto unknown structural feature: The coordination polyhedra around the U atoms are edge‐linked monocapped trigonal prisms, the U^V atoms are therefore seven‐coordinated. This leads to a U–U distance of 3.8913(6) Å. A weak U^V–U^V interaction is observed for the dinuclear [U₂F₁₂]^2? complex and described by the antiferromagnetic exchange J_exp of circa ?29.9 cm^?1. The crystalline compound can be easily prepared from SrF₂ and β‐UF₅ in anhydrous hydrogen fluoride (aHF) at room temperature. It was studied by means of single crystal X‐ray diffraction, IR, Raman and UV/VIS spectroscopy, magnetic measurements, and by molecular as well as by solid‐state quantum chemical calculations.     

Layer-engineering of high-Tc superconductors: (Cu,Mo)Sr2(Ce,Y)4Cu2O13+delta with a quadruple-fluorite-layer block between CuO2 planes

Among high-Tc superconductive copper oxides, there have been known phases that contain fluorite-structured layers as an additional "blocking block" between adjacent CuO2 planes. Here, we report that even a phase with the CuO2 planes separated by a 12-A thick quadruple-fluorite-layer block can be synthesized in a single phase and strongly oxygenated form to exhibit superconductivity with a Tc value as high as 55 K. The new phase is the fourth member of the (Cu,Mo)Sr2(Ce,Y)sCu2O(5+2s+delta) or (Cu,Mo)-12s2 homologous series. Comparison with the previously known s = 1, 2, and 3 members of the series reveals the amazing conclusion that Tc remains essentially unaffected upon inserting additional fluorite-structured layers between the two CuO2 planes as long as the hole-doping level of the planes is kept constant.