An improved enzymatic assay for glucose determination in blood serum using a l,1′-dimethylferricinium dye

l,l′-dimethylferricinium (DMFe⁺),a stable and pH-insensitive blue dye, was prepared via enzymatic oxidation of a 1,1′-dimethylferrocene (DMFe):2-hydroxypropyl-β-cyclodextrin (HPCD) watersoluble inclusion complex, using bilirubin oxidase immobilized onto porous aminopropyl glass beads via glutaraldehyde activation. In the presence of glucose, DMFe⁺ was reduced to DMFe by reacting with the reduced glucose oxidase (FADH₂), and the absorbance decrease was followed at 650 nm. In acetate pH 5.2 buffer, the response to glucose in blood serum was nonlinear, especially in the low concentration range, because of a competition for the reduced glucose oxidase between the DMFe⁺ dye and oxygen. At this pH, endogenous ceruloplasmin was also observed to oxidize residual DMFe (16%) in the dye preparation, causing an increase in absorbance at 650 nm. An assay protocol was then developed using maleate buffer, pH 6.5, to overcome these interferences as well as mutarotation of α-D-glucose. The results obtained for glucose in the blood serum samples agreed well with those of the reference hexokinase/glucose-6-phosphate dehydrogenase method.     

Analysis of insecticidal proteins from Bacillus thuringiensis and recombinant Escherichia coli by capillary electrokinetic chromatography

Bacillus thuringiensis and recombinant Escherichia coli proteinaceous protoxins were subject to proteolysis and analyzed by capillary electrokinetic chromatography. Three resulting toxins (65 kDa) were baseline-resolved within 22 min using a 10 mM borate, pH 11 separation buffer consisting of 25 mM sodium dodecyl sulfate (SDS) and 30 mM phytic acid. The toxins displayed differential interactions with the SDS and phytic acid phases to effect their separation. The ion-pairing interaction between the analyte and phytic acid was also useful in preventing adsorption to the capillary walls and thus enhanced separation resolution and efficiency. The use of electrokinetic chromatography allows achievement of the separation in a significantly shorter time than conventional high-performance liquid chromatography (HPLC) using a diethylaminoethyl (DEAE) weak-anion exchanger.     

Isolation,purification, and further characterization of an L-phenylalanine oxidase fromMorganella morganii

A l-amino acid oxidase was isolated, purified, and characterized fromMorganella morganii 53187, a bacterium formerly known asProteus morganii. The synthesis of the enzyme by this bacterial strain was growth-associated and decreased sharply when the culture just reached the stationary phase. Based on this finding, the preparation of spheroplast by lysozyme-ethylene-diaminetetra-acetic acid (EDTA) disruption was carried out using the cells harvested during the exponential growth phase. Among several detergents tested, at the detergent-to-protein ratio of 2.5, 3-[(3-cholamidopropyl)dimethylammonio]-l-propane-sulfonate (CHAPS) was very effective in solubilizing most of the enzyme attached to the membranes while still preserving the activity of the solubilized enzyme. The resulting enzyme solution was then purified by hydrophobic interaction chromatography, followed by ion exchange chromatography and gel permeation. The enzyme was purified 19-fold with an overall recovery yield of 12%, corresponding to a specific activity of 252.2 U/mg protein. The selectivity of the purified enzyme toward l-amino acids was pH-dependent. At pH 6.35, the enzyme was very specific to l-leucine, whereas the selectivity for l-phenylalanine could be improved at pH 7.4. The enzyme exhibited a wide optimum temperature range 35–43?C and exhibited 1, l?dimethylferricinium reductase capability in the presence of l-phenylalanine.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Innovations in high-pressure liquid injection technique for gas chromatography: pressurized liquid injection system

In gas chromatography (GC), highly volatile liquefied hydrocarbons are commonly injected using devices such as high-pressure syringes, piston valves, liquid rotary sampling valves, or vaporizing regulators. Although these techniques are adequate in some cases, there are known deficiencies. A new generation of sampling valve has been recently innovated and commercialized. Some of the highlights of the pressurized liquid injection system (PLIS) include compact size, the capability to directly couple to an injection port without the need for preinjection vaporization and transfer lines, and sample sizes ranging from 0.2 to 2.0 micro L. Although the valve has a specification of helium leak-free rating of 82.7 bar (1200 psig), the valve passes a hydrostatic pressure test of up to 414 bar (6000 psig). In the unheated version of PLIS, vaporization of solutes occur mainly because of the sheering effect of carrier gas in combination with thermal energy drawn from an injection port or a heated adaptor. This was found to be adequate for solutes with high to medium volatility of up to nC14 hydrocarbon. A higher molecular weight range of up to nC44 hydrocarbon can be achieved with the implementation of a heated version of PLIS, in which the channel of the shaft can be resistively heated at a rate of up to 400 degrees C/s. With its first introduction in May 2002, PLIS has gained acceptance amongst practitioners in GC because it addresses a key unarticulated need in sample introduction/enrichment and by specifically targeting many deficiencies encountered in contemporary high-pressure injection devices. In this paper, the design and performance of the various valve systems of PLIS, as well as industrial chromatographic applications, is presented.     

Immobilizing a Fluorescent Dye Offers Potential to Investigate the Glass/Resin Interface

Silane coupling agents are commonly applied to glass fibers to promote fiber/resin adhesion and enhance durability in composite parts. In this study, a coupling agent multilayer on glass was doped with trace levels of the dimethylaminonitrostilbene (DMANS) fluorophore. The fluorophore was immobilized on the glass surface by tethering the molecule to a triethoxy silane coupling agent, creating the DMANS/silane coupling agent molecule (DMSCA). DMSCA was then diluted with commonly used coupling agents and grafted to a glass microscope coverslip to create a model composite interface. A 53-nm blue shift in fluorescence from the immobilized DMSCA can be followed during cure of an epoxy resin overlayer, giving this technique potential to monitor the properties of the fiber/resin interface during composite processing. Contact angle measurements on these coupling agent layers were similar in the presence or absence of the DMSCA molecule, suggesting that trace levels of the fluorescent probe did not affect the structure of the layer. The immobilized DMSCA molecule behaved similarly to the DMANS precursor in solution. Both showed longer wavelength fluorescence in more polar environments. Copyright 2000 Academic Press.