Microchip capillary electrophoresis/electrochemistry

Microfabricated fluidic devices have generated considerable interest over the past ten years due to the fact that sample preparation, injection, separation, derivatization, and detection can be integrated into one miniaturized device. This review reports progress in the development of microfabricated analytical systems based on microchip capillary electrophoresis (CE) with electrochemical (EC) detection. Electrochemical detection has several advantages for use with microchip electrophoresis systems, for example, ease of miniaturization, sensitivity, and selectivity. In this review, the basic components necessary for microchip CEEC are described, including several examples of different detector configurations. Lastly, details of the application of this technique to the determination of catechols and phenols, amino acids, peptides, carbohydrates, nitroaromatics, polymerase chain reaction (PCR) products, organophosphates, and hydrazines are described.     

p-aminophenyl phosphate: an improved substrate for electrochemical enzyme immnoassay

An alternative substrate is described for enzyme immunosaasay with electrochemical detection. Alkaline phosphatase (EC.3.1.3.1) activity is determined by using p-aminophenyl phosphate as the enzyme substrate. Enzyme-generated p-aminophenol is detected amperometrically at a glassy carbon electrody by liquid chromatography with electrochemical detection. The oxidation potential obtained for the detectionof p-aminophenol is lower than that for phenol, the previously used substrate product. The detection limit for p-aminophenol is 0.20pmol. A detection limit of 30 pg ml^-1 for digoxin and a 5-min incubationtime for the enzyme reaction were obtained with the new system.     

Fabrication and evaluation of a carbon-based dual-electrode detector for poly(dimethylsiloxane) electrophoresis chips

The first carbon-based dual-electrode detector for microchip capillary electrophoresis (CE) is described. The poly(dimethylsiloxane) (PDMS)-based microchip CE devices were constructed by reversibly sealing a PDMS layer containing separation and injection channels to another PDMS layer containing carbon fiber working electrodes. End-channel amperometric detection was employed and the performance of the chip was evaluated using catechol. The response was found to be linear between 1 and 600 microM with an experimentally determined limit of detection (LOD) of 500 nM and a sensitivity of 30 pA/microM. Collection efficiencies for catechol ranged from 36.0 to 43.7% at field strengths of 260-615 V/cm. The selectivity that can be gained with these devices is demonstrated by the first CE-based dual-electrode detection of a Cu(II) peptide complex. These devices illustrate the potential for a rugged and easily constructed microchip CE system with an integrated carbon-based detector of similar scale.     

Determination of cannabinoids in hair using high-pH* non-aqueous electrolytes and electrochemical detection. Some aspects of sensitivity and selectivity

Non-aqueous capillary electrophoresis with electrochemical detection (NACE-ED) was applied to the determination of cannabinoids in hair. The effect of different electrolyte compositions on the selectivity of the separation of tetrahydrocannabinol (THC), cannabinol (CBN), cannabidiol (CBD) and tetrahydrocannabinol carboxylic acid (THCA) was studied. Complete electrophoretic resolution was obtained using a strongly basic background electrolyte consisting of 5 mM sodium hydroxide dissolved in acetonitrile-methanol (1:1). Electrochemical detection yielded well defined signals in the oxidation mode. In order to obtain low limits of detection experimental parameters, which determine the sensitivity and the noise level, were optimized. A crucial parameter for sensitive measurements using a wall-tube flow cell as end-column detector is the distance between the capillary outlet and the working electrode. The highest signal-to-noise ratio using a 50 microm I.D. capillary was obtained at a distance of 25 microm. When the capillary outlet was moved away from the working electrode, thus reducing the strength of the separation field present at the working electrode, a large low frequency noise developed. This rise was attributed to disturbances of the hydrodynamic pattern in the flow cell. Analytical aspects such as sensitivity, reproducibility and selectivity were addressed in this work. The precision of NACE-ED regarding migration time and peak height for a sample containing 1 microg/ml THC was 0.4% and 1.1% (RSD), respectively (n=5). The calibration curve was linear for concentrations ranging between 0.1 and 10 microg/ml (r=0.998). The limit of detection for THC was 37 ng/ml, which is almost two orders of magnitude lower when compared with on-column UV detection. The method was evaluated using hair samples containing cannabinoids as sample material.     

Determination of bupivacaine and metabolites in rat urine using capillary electrophoresis with mass spectrometric detection

A method using capillary electrophoresis-mass spectrometry (CE-MS) was developed for the structural elucidation of bupivacaine and metabolites in rat urine. Prior to CE-MS analysis, solid-phase extraction (SPE) was used for sample cleanup and preconcentration purposes. Exact mass and tandem mass spectrometric (MS/MS) experiments were performed to obtain structural information about the unknown metabolites. Two instruments with different mass analyzers were used for mass spectrometric detection. A quadrupole time-of-flight (Q-TOF) and a magnetic sector hybrid instrument were coupled to CE and used for the analysis of urine extracts. Hydroxybupivacaine as well as five other isomerically different metabolites were detected including methoxylated bupivacaine.     

Optimization of the conditions for biuret complex formation for the determination of peptides by capillary electrophoresis with ultraviolet detection

Capillary electrophoresis with UV detection was utilized to optimize copper complexation conditions for the analysis of neuropeptides. Complexation was confirmed by monitoring the response at a visible wavelength. Four complexation strategies were used to compare the UV response of native peptides and their respective copper complexes. All four strategies resulted in complete complexation, but on-capillary complexation provided significant advantages over precapillary and pre-/on-capillary. An increase in UV absorbance along with peak stacking resulted in a significantly greater response using the on-capillary technique. Also, on-capillary complexation does not require dilution of the sample. The effects of temperature and copper concentration were also investigated. The utility of this method for the separation of an enkephalin peptide mixture is presented.     

Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.     

Choosing an equivalent replacement column for a reversed-phase liquid chromatographic assay procedure

The column selectivity parameters (H, S*, A, B and C) described in the preceding paper [L.R. Snyder, A. Maule, A. Heebsch, R. Cuellar, S. Paulson, J. Carrano, L. Wrisley C.C. Chan, N. Pearson, J.W. Dolan, J.J. Gilroy, J. Chromatogr. A 1057 (2004) 49-57] can be used to compare columns in terms of selectivity. A detailed procedure for such column comparisons is presented here, and evaluated by its use in finding suitable replacement columns for 12 different routine separations performed in five different pharmaceutical analysis laboratories.     

pH-mediated field-amplified sample stacking of pharmaceutical cations in high-ionic strength samples

Capillary electrophoretic separation of samples of physiological origin typically have both poor resolution and efficiency due to destacking. We have previously reported a stacking method for concentration of catecholamines in artificial dialysate, or Ringer's solution. However, pH-mediated sample stacking of other cations has not been investigated. In this report, pH-mediated stacking has been extended to eletripan, dofetilide, doxazosin, sildenafil, UK-103,320, UK-202,581, and CP-122,288. These compounds were chosen without prior structural screening except that they were cationic at the pH of our background electrolyte (BGE). Capillary electrophoretic behavior of samples in BGE is compared with those of samples in Ringer's solution with and without pH-mediated acid stacking. Results indicate that the peak heights and efficiencies for acid-stacked samples are increased compared to the unstacked samples in Ringer's solution or BGE. For example, the peak efficiencies for 5 s injections of eletriptan in BGE and Ringer's solution are 138,000 and 72,000 plates, respectively. In contrast, a 10 s injection of eletriptan followed by acid injection for 16 s produces a peak with 246,000 plates. Evaluation of the stacking effect was performed by comparison of the peak height at similar peak efficiencies for samples in Ringer's solution with and without stacking. Using this method, pH-mediated acid stacking provides a 10- to 27-fold sensitivity enhancement for the seven cations.     

Detection of a urinary biomaker for oxidative DNA damage 8-hydroxydeoxyguanosine by capillary electrophoresis with electrochemical detection

8-Hydroxydeoxyguanosine (8-OHdG) is present in urine as a result of oxidative DNA damage associated with age-related diseases such as cancer. In this report a method is presented for the detection of 8-OHdG in human morning urine utilizing capillary electrophoresis with electrochemical detection (CEEC). The limit of detection for a aqueous standard of 8-OHdG is 50 nM (signal to noise ratio S/N = 3). A single solid-phase extraction (SPE) step with a C18 column is used for sample cleanup and 20-fold preconcentration of the urine before analysis by CEEC. Optimized conditions for analysis of extracted urine are E(app) = 0.5 V vs. Ag/AgCl with 20 mM sodium borate/20% MeOH v/v, pH 9, as the background electrolyte, and a separation voltage of 22 kV. The concentration of 8-OHdG varied from 6 to 86 nM with an average value of 42 +/- 26.9 nM for four healthy female and four healthy male subjects between the ages of 23 and 43.