Organotin and tin(IV) derivatives of dimethyldithioarsinic acid

Organotin derivatives of dimethyldithioarsinic (dithocacodylic) acid have been obtained from the appropriate organotin chloride and the sodium salt of the latter. Tin(IV) chloride and NaS₂AsMe₂ · 2 H₂O yielded only two products, namely Cl₂Sn(S₂AsMe₂)₂ and Sn (S₂AsMe₂)₄, regardless of the reagent ratio. Spectroscopic characterization of the compounds (infrared and¹H NMR) provides structural information suggesting that the dimethyldithioarsinato group behaves as monodentate (or anisobidentate) ligand in Me₂Sn(S₂AsMe₂)₂, Bu₂Sn-(S₂AsMe₂)₂ and Cy₃Sn(S₂AsMe₂), as bidentate in Ph₂Sn(S₂AsMe₂)₂, Ph₃Sn(S₂AsMe₂) and Cl₂As(S₂AsMe₂)₂, whereas Sn(S₂AsMe₂)₄ contains both mono- and bidentate ligands, presumably in a six-coordinate structure.     

Resolution enhancement in multidimensional solid-state NMR spectroscopy of proteins using spin-state selection

We show that the resolution of homonuclear multidimensional solid-state NMR correlation experiments can be significantly improved using transition selection and spin-state-selective polarization transfer techniques. The selection and transfer of single states allow the removal of the J-coupling contribution from the line width in both the direct and indirect spectral dimensions. This is demonstrated with a new spin-state-selective CO-Calpha correlation experiment, applied to a microcrystalline 85-residue protein. With this new sequence, all four components of the CO-Calpha cross-peaks are separated into different spectra, obtained by linear combination of four recorded data sets. Line narrowing of up to 44% was obtained on the protein sample for the spin-state-selective CO-Calpha spectrum compared to a standard spin-diffusion experiment. The new technique also allows an easy distinction between "direct" and "relayed" transfer cross-peaks.     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Sol–Gel SiO2-ZrO2 Coatings for Optical Applications

SiO₂-ZrO₂ based nanostructured multilayers films have been prepared by sol–gel processing from metallorganic precursors by low temperature inorganic polymerization reactions. Simultaneous gelation of both precursors was realized. Homogeneous and transparent films were obtained at room temperature by dip- and spin-coating on glass and silicon wafer substrates. Samples with successively deposited layers (1–3 layers) and successive thermal treatments have been also studied. Each deposited layer was thermally treated for 1 h at 300°C. The coatings were characterized by XRD, spectroellipsometry (SE), UV-VIS spectroscopy and AFM methods. The influence of substrates, number of coatings and number of thermal treatments on the optical and structural properties of the films was established. The thickness of three deposited SiO₂-ZrO₂ layers is about 496 nm on glass substrates and 413 nm on the silicon wafer substrate. The films deposited on glass are more porous than those deposited on silicon. The properties of optical waveguide prepared from SiO₂-ZrO₂ layers on silicon substrates will be discussed.     

Stereochemistry of cyclobutanone resulted from cycloadditions of t-butylcyanoketene to bicyclo[2.2.1]heptene derivatives, as evidence for a π2s+π2a reaction mode

The stereochemistry of the cyclobutanones 1-7, resulted from the reaction of t-butylcyanoketene with bicyclo[2.2.1]heptene, bicyclo[2.2.1]heptadiene, 1,4 - dihydro - 1,4 - methanonaphthalene, 1,4 - dihydro - 9 - (1 - methylethylidene) - 1,4 - methanonaphthalene, 1,4 - dihydro - 1,4 - epoxynaphthalene, l,4,4a,8b - tetrahydro - 1,4 - methanobiphenylene (l,4,4a,8b) and 1,4,4a,8b - tetrahydro - 1,4 - methanobiphenylene(1,4,4aβ,8bβ) was established as having the cyclobutanone ring exo and the t-Bu group in the configuration. These findings represent a stereochemical argument in favour of a _π2_s + _π2_a reaction mode of t-butylcyanoketene to the above mentioned bicyclo[2.2.1]heptene derivatives. Observations regarding preservation of the original configurations of alkenes as well as the geometrical distorsion of the cyclobutanones are shortly discussed.     

New symmetric azomethinic dimer: the influence of structural heterogeneity on the liquid crystalline behaviour

The paper deals with the study of the thermotropic liquid crystalline properties of a new azomethinic symmetric dimer and some of its structural heterogeneous mixtures with one of its reagents. Their thermotropic behaviour was monitored by polarised light microscopy, differential scanning microscopy and variable temperature X-ray diffraction measurements. The influence of the structural heterogeneity on the mesomorphic behaviour was established and some similarities with the mesomorphic behaviour of the polydisperse polymers were underlined.     

Synergistic effect between TiO2 sol–gel and Degussa P25 in dye photodegradation

The TiO₂ powders were synthesized by versatile and low cost sol–gel process using HNO₃ and titanium tetra-isopropoxide (volumetric ratio of 4:1) following by the hydrolysis reaction. The powders show the two polymorphs of TiO₂: 96 % anatase and 4 % brookite, due to acidic condition (pH = 3). Thin films of titanium oxide were obtained by dip-coating, using the sol–gel of titanium oxide mixed with commercial Degussa P25 into a weight ratio 1:1 or 1:1.5, to enhance the synergistic effect of anatase/rutile ratio aiming at increasing the efficiency of the TiO₂ photocatalyst in dyes degradation. The thin film surface (charge and morphology) was controlled by polymer (poly-ethylene glycol) and surfactant (Sodium dodecyl sulphate, Triton X100) addition. The titanium oxide was characterized by particle size analyzer, contact angle measurements, X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The photocatalytic properties of powders and coatings were evaluated based on the degradation efficiency of two reference dyes (methyl orange and methylene blue). The results outline that poly(ethylene glycol) and films morphologies are the most influential factors that affecting the photocatalytic activity.     

Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.     

A Theoretical Model for Release Dynamics of an Antifungal Agent Covalently Bonded to the Chitosan

The aim of the study was to create a mathematical model useful for monitoring the release of bioactive aldehydes covalently bonded to the chitosan by reversible imine linkage, considered as a polymer–drug system. For this purpose, two hydrogels were prepared by the acid condensation reaction of chitosan with the antifungal 2-formyl-phenyl-boronic acid and their particularities; influencing the release of the antifungal aldehyde by shifting the imination equilibrium to the reagents was considered, i.e., the supramolecular nature of the hydrogels was highlighted by polarized light microscopy, while scanning electron microscopy showed their microporous morphology. Furthermore, the in vitro fungicidal activity was investigated on two fungal strains and the in vitro release curves of the antifungal aldehyde triggered by the pH stimulus were drawn. The theoretical model was developed starting from the hypothesis that the imine-chitosan system, both structurally and functionally, can be assimilated, from a mathematical point of view, with a multifractal object, and its dynamics were analyzed in the framework of the Scale Relativity Theory. Thus, through Riccati-type gauges, two synchronous dynamics, one in the scale space, associated with the fungicidal activity, and the other in the usual space, associated with the antifungal aldehyde release, become operational. Their synchronicity, reducible to the isomorphism of two SL(2R)-type groups, implies, by means of its joint invariant functions, bioactive aldehyde compound release dynamics in the form of “kink–antikink pairs” dynamics of a multifractal type. Finally, the theoretical model was validated through the experimental data.