Expression ofAscaris suum malic enzyme in a mutantEscherichia coli allows production of succinic acid from glucose

Applied Biochemistry and Biotechnology - The malic enzyme gene ofAscaris suum was cloned into the vector pTRC99a in two forms encoding alternative arnino-termini. The resulting plasmids, pMEAl and...     

Capillary electrophoresis in aqueous-organic media. Ionic strength effects and limitations of the Hubbard-Onsager dielectric friction model

The mobilities of three aromatic sulfonates, ranging in charge from -1 to -3, were investigated by capillary electrophoresis using buffers containing 0 to 75% ethanol or 2-propanol. Absolute mobilities were determined by extrapolation of the effective mobilities to zero ionic strength according to the Pitts' equation. For all buffers studied, ions of higher charge experienced larger ionic strength effects. The resulting ionic strength-induced selectivity alterations were more dramatic when organic solvents were present in the media. Furthermore, for different organic modifier types and contents, the magnitude of the ionic strength effect was governed to a large extent by the 1/(eta epsilon 1/2) dependence in the electrophoretic effect of the Pitts' equation. Addition of ethanol or 2-propanol to the electrophoretic media resulted in changes in the absolute mobilities of the ions. These solvent-induced mobility changes are attributed to dielectric friction. As predicted by the Hubbard-Onsager model, dielectric friction increased with increasing organic content and with increasing analyte charge. As a result, dramatic changes in the relative absolute mobilities were observed, such as a reversal in migration order between sulfonates of -1 and -3 charge in 75% 2-propanol. Within the alcohols, the Hubbard-Onsager model was successful at predicting the relative mobility trends upon changing solvent. However, the relative trends observed between acetonitrile-water and alcohol-water media were not consistent with the model. This may be explained by the continuum nature of the model, whereby the different ion-solvent interactions characteristic to each solvent class are not taken into account.     

Structural basis for discriminative regulation of gene expression by adenine- and guanine-sensing mRNAs

Metabolite-sensing mRNAs, or "riboswitches," specifically interact with small ligands and direct expression of the genes involved in their metabolism. Riboswitches contain sensing "aptamer" modules, capable of ligand-induced structural changes, and downstream regions, harboring expression-controlling elements. We report the crystal structures of the add A-riboswitch and xpt G-riboswitch aptamer modules that distinguish between bound adenine and guanine with exquisite specificity and modulate expression of two different sets of genes. The riboswitches form tuning fork-like architectures, in which the prongs are held in parallel through hairpin loop interactions, and the internal bubble zippers up to form the purine binding pocket. The bound purines are held by hydrogen bonding interactions involving conserved nucleotides along their entire periphery. Recognition specificity is associated with Watson-Crick pairing of the encapsulated adenine and guanine ligands with uridine and cytosine, respectively.     

Use of long-chain alkylamines for preconcentration and determination of traces of molybdenum, tungsten and rhenium by atomic-absorption spectroscopy-II: molybdenum in soils, sediments and natural waters

Molybdenum is extracted as the thiocyanate complex with the quaternary long-chain aliphatic amine Aliquat 336 in chloroform, followed by evaporation of the solvent, dissolution in MIBK, and atomic-absorption spectroscopy. The method is simple, rapid and sensitive, with few interference problems for the determination of the Mo content of soils and sediments in the range 0.1-1.0 ppm with a relative standard deviation better than 5% when 1-g samples are used. Quantitative extraction from large volumes of aqueous solution has also been confirmed, allowing the determination of Mo in natural waters in the ppM range.     

Ruthenium bipyridyl compounds with two terminal alkynyl ligands

Compounds of the form Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)2(X2bipy = 4,4'-X(2)-2,2'-bipyridine, X = Me 3a, Br 3b, I 3c) have been synthesised from the mono-alkynyl precursors Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)Cl (X = Me 2a, Br 2b, I 2c); the former are the first ruthenium bis-alkynyl compounds that also contain a bipyridyl ligand. Spectroelectrochemical investigation of 3a shows that the metal is readily oxidised to form the ruthenium(III) compound 3a+, and will also undergo a single-electron reduction at each nitro group to form 3a2-. ESR and UV/visible spectra of these redox congeners are presented. We also report the synthesis of [Ru(Me2bipy)(PPh3)2(-C triple bond CBut)(N triple bond N)][PF6] during the attempted synthesis of Ru(Me2bipy)(PPh3)2(-C triple bond CBut)2, and report its X-ray crystal structure and IR spectrum. X-Ray crystal structures of 3b and 3c(as two different solvates) are presented, and the nature of the intermolecular interactions seen therein is discussed. Z-Scan measurements on Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, But, Ph, C6H4Me) are also reported, and show that Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, Ph) exhibit moderate third-order non-linearities.     

Determination of zwitterionic and cationic surfactants by high-performance liquid chromatography with chemiluminescenscent nitrogen detection

The use of chemiluminescent nitrogen specific detection (CLND) combined with an HPLC separation allows for the identification and quantification of cationic and zwitterionic surfactants. The CLND provides equimolar responses, based on the amount of nitrogen within any compound. This allows for the detection of any nitrogen containing surfactant. Reversed-phase separation methods using cyano columns are developed for cationic and zwitterionic (sulfobetaine) surfactant mixtures. The limits of detection for these surfactants are in the single micromolar range (1 ng N). A linear response was obtained (R2=0.9981) between 50 microM and 5 mM. The methodology was then applied to the determination of an industrial zwitterionic surfactant, Rewoteric AM CAS U [coco(amidopropyl)hydroxyldimethylsulfobetaine].     

SSZ-53 and SSZ-59: two novel extra-large pore zeolites

The syntheses, structure solutions, and physicochemical and catalytic characterizations of the novel zeolites SSZ-53 and SSZ-59 are described. SSZ-53 and SSZ-59 were synthesized under hydrothermal conditions with the [1-(4-fluorophenyl)cyclopentylmethyl]trimethyl ammonium cation and 1-[1-(4-chlorophenyl)cyclopentylmethyl]-1-methyl azocanium cation, respectively, as structure-directing agents. The framework topology of SSZ-53 was solved with the FOCUS method, and the structure of SSZ-59 was determined by model building. Rietveld refinement of synchrotron X-ray powder diffraction data confirms each proposed model. SSZ-53 and SSZ-59 each possess a one-dimensional channel system delimited by 14-membered rings. Results from transmission electron microscopy, electron diffraction, catalytic experiments (spaciousness index and constraint index tests), and argon and hydrocarbon adsorption experiments are consistent with the proposed structures.     

Spectrophotometric and fluorometric determination of traces of molybdenum in soils and plants

The reaction of the molybdenum oxypentathiocyanate ion with the dyestuff Rhodamine B (RhB) produces the ternary complex. MoO(SCN)(5)(RhB)(2) The formation of this complex is accompanied by a colour change and by extinction of the fluorescence of RhB. A spectrophotometric and fluorometric method for the determination of Mo has been developed from these observations. The method is free from interferences and has detection limits of 0.1 mug and 0.05 mug of Mo for absorption and fluorescence measurements, respectively. The spectrophotometric method is applicable to the determination of Mo in soils and the fluorometric method is suited to the determination of Mo in plants.     

Selective fluorometric detection of polyamines using micellar electrokinetic chromatography with laser-induced fluorescence detection

The polyamines putrescine, cadaverine, spermine and spermidine were separated and quantified by micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence detection. The derivatization reagent, 1-pyrenebutanoic acid succinimidyl ester (PSE), allowed for the selective detection of the polyamines at 490 nm. Multiple labeling of the polyamines with PSE allows the formation of intramolecular excimers that emit at longer wavelengths (450-520 nm) than mono-labeled analytes (360-420 nm). Optimal separation of the labeled polyamines was achieved using a separation buffer consisting of 10 mM phosphate pH 7.2, 30 mM cholate, and 30% acetonitrile. Using these conditions, the four polyamines were separated in under 10 min. Limits of detection for putrescine, cadaverine, spermine and spermidine were 6, 5, 15 and 13 nM, respectively. These are superior or comparable to those previously reported in the literature using fluorescence detection.     

Vapoluminescent Behavior and the Single-Crystal-to-Single-Crystal Transformations of Chloroform Solvates of [Au2(μ-1,2-bis(diphenylarsino)ethane)2](AsF6)2

The mono- and di-chloroform solvates of [Au₂(μ-1,2-bis(diphenylarsino)ethane)₂](AsF₆)₂ undergo single-crystal-to-single-crystal transformations that result in gain (over 12 hours) or slow loss (over five years) of only one chloroform molecule. The change in solvation results in changes in the structure and luminescence of the digold cation. The cation consists of a pair of slightly bent As-Au-As units that are connected through the two bridging dpae ligands and by aurophilic interactions with Au⋅⋅⋅Au contacts of 3.05152(15) Å in the disolvate or 2.9570(5) Å in the monosolvate.