An electron-catalyzed cope cyclization. The structure of the 2,5-dicyano-1,5-hexadiene radical anion in the gas phase

The radical anion of 2,5-dicyano-1,5-hexadiene is shown to undergo Cope cyclization in a flowing afterglow-triple quadrupole apparatus. The cyclic structure of the 2,5-dicyano-1,5-hexadiene radical anion was established by using chemical reactivity. The ion reacts with CO2 and CS2 by addition, whereas the radical anions of closed-shell molecules such as fumaronitrile do not react with these reagents. The ion exhibits reactivity characteristic of a distonic ion in that it sequentially adds CO2 and NO or NO2. It reacts with NO by forming a product at m/z 135 corresponding to addition followed by loss of HCN. The reactivity and CID spectrum of the product ion at m/z 135 agrees with that of oximate ion, which requires a cyclic precursor ion. Attempts to generate radical anions of acrylonitrile and 2,6-dicyano-1,6-heptadiene were unsuccessful, providing additional evidence against a linear structure as a stable structure for 2,5-dicyano-1,5-hexadiene radical anion. The cyclization of the radical anion of the 2,5-dicyano-1,5-hexadiene is the first example of an electron-catalyzed Cope cyclization.     

Low-temperature formation and characterization of Cu2O nanoparticles in the binary gold alloys

Thermal analyses, using differential scanning calorimetry (DSC) and dilatometry, reveal an important anomaly at low temperature for Au-25 wt.% Cu composition after homogenization at 700°C during 2 hours under vacuum followed by heating up to 160°C before water quenching. This anomaly has been already observed and not explained. Surface characterization, using scanning electron microscopy (SEM), atomic force microscopy (AFM), and scanning tunneling microscopy (STM), exhibits a specific topography, consisting of a nanostructured surface. The precipitates of nanostructured particles are homogeneously scattered all over the surface for this 18-carat gold alloy. Moreover, X-ray photoelectron spectroscopy (XPS) shows that the composition of the observed particles corresponds to cuprous oxide phase (Cu₂O). The formation of such material can be explained by the diffusion of copper atoms from the lattice to the surface at 160°C. Pulsed radio-frequency glow discharge optical emission spectroscopy (RF GD-OES) further proves the proposed Cu₂O formation through a diffusion process. The appearance of such cuprous oxide nanoparticles on the Au-Cu alloy surface explains the low-temperature DSC and dilatometry anomaly and affects directly the surface electrical resistance at low temperature. These results might open a large gate for new ideas to investigate in catalytic, electronic, and antimicrobial activities.     

The Nephroprotective Effect of Zizyphus lotus L. (Desf.) Fruits in a Gentamicin-Induced Acute Kidney Injury Model in Rats: A Biochemical and Histopathological Investigation

Zizyphus lotus L. (Desf.) (Z. lotus) is a medicinal plant largely distributed all over the Mediterranean basin and is traditionally used by Moroccan people to treat many illnesses, including kidney failure. The nephrotoxicity of gentamicin (GM) has been well documented in humans and animals, although the preventive strategies against it remain to be studied. In this investigation, we explore whether the extract of Zizyphus lotus L. (Desf.) Fruit (ZLF) exhibits a protective effect against renal damage produced by GM. Indeed, twenty-four Wistar rats were separated into four equal groups of six each (♂/♀ = 1). The control group was treated orally with distilled water (10 mL/kg); the GM treated group received distilled water (10 mL/kg) and an intraperitoneal injection of GM (80 mg/kg) 3 h after; and the treated groups received ZLF extract orally at the doses 200 or 400 mg/kg and injected intraperitoneally with the GM. All treatments were given daily for 14 days. At the end of the experiment, the biochemical parameters and the histological observation related the kidney function was explored. ZLF treatment has significantly attenuated the nephrotoxicity induced by the GM. This effect was indicated by its capacity to decrease significantly the serum creatinine, uric acid, urea, alkaline phosphatase, gamma-glutamyl-transpeptidase, albumin, calcium, sodium amounts, water intake, urinary volume, and relative kidney weight. In addition, this effect was also shown by the increase in the creatinine clearance, urinary creatinine, uric acid, and urea levels, weight gain, compared to the rats treated only with the GM. The hemostasis of oxidants/antioxidants has been significantly improved with the treatment of ZLF extract, which was shown by a significant reduction in malondialdehydes levels. Histopathological analysis of renal tissue was correlated with biochemical observation. Chemical analysis by HPLC-DAD showed that the aqueous extract of ZLF is rich in phenolic compounds such as 3-hydroxycinnamic acid, catechin, ferulic acid, gallic acid, hydroxytyrosol, naringenin, p- coumaric Acid, quercetin, rutin, and vanillic acid. In conclusion, ZLF extract improved the nephrotoxicity induced by GM, through the improvement of the biochemical and histological parameters and thus validates its ethnomedicinal use.     

Fast liquid chromatography separation and multiple‐reaction monitoring mass spectrometric detection of neurotransmitters

We describe here the fast LC‐MS/MS separation of a mixture of neurotransmitters consisting of dopamine, epinephrine, norepinephrine, 3,4‐dihydroxybenzylamine (DHBA), salsolinol, serotonin, and γ‐aminobutyric acid (GABA). The new UltiMate® 3000 Rapid Separation system (RSLC) was successfully coupled to the 4000 QTRAP mass spectrometer operating in multiple‐reaction monitoring (MRM) mode. The separation was attained using a 100 mm length, 2.2 μm particle size Acclaim column at a flow rate of 0.5 mL/min. The column back pressure was 350 bar, while the total run time including column re‐equilibration was 5.2 min. The peak resolution was minimally affected by the fast separation. The RSLC‐MRM separation was found to have a precision range based on peak area for 50 replicate runs of 2–5% CV for all analytes, and the reproducibility of the retention time for all analytes was found to range from 0–2% CV. The described method represents an almost seven times shorter analysis time of neurotransmitters using LC/MRM which is very useful in screening large quantities of biological samples for various neurotransmitters.     

Semiconducting and photoelectrochemical properties of the ilmenite CoTiO3 prepared by wet method and its application for O2 evolution under visible light

Journal of Solid State Electrochemistry - The ilmenite CoTiO3 was synthesized by chemical route, and the decomposition of nitrates was followed by thermal analysis (TG/DTA). The intermediate...     

Rapid and efficient glycoprotein identification through microwave-assisted enzymatic digestion

Identification of protein glycosylation sites is analytically challenging due to the diverse glycan structures associated with a glycoprotein. Mass spectrometry (MS)-based identification and characterization of glycoproteins has been achieved predominantly with the bottom-up approach, which typically involves the enzymatic cleavage of proteins to peptides prior to LC/MS or LC/MS/MS analysis. However, the process can be challenging due to the structural variations and steric hindrance imposed by the attached glycans. Alternatives to conventional heating protocols, that increase the rate of enzymatic cleavage of glycoproteins, may aid in addressing these challenges. An enzymatic digestion of a glycoprotein can be accelerated and made more efficient through microwave-assisted digestion. In this paper, a systematic study was conducted to explore the efficiency of microwave-assisted enzymatic (trypsin) digestion (MAED) of glycoproteins as compared with the conventional method. In addition, the optimum experimental parameters for the digestion such as temperature, reaction time, and microwave radiation power were investigated. It was determined that efficient tryptic digestion of glycoproteins was attained in 15 min, allowing comparable if not better sequence coverage through LC/MS/MS analysis. Optimum tryptic cleavage was achieved at 45°C irrespective of the size and complexity of the glycoprotein. Moreover, MAED allowed the detection and identification of more peptides and subsequently higher sequence coverage for all model glycoprotein. MAED also did not appear to prompt a loss or partial cleavage of the glycan moieties attached to the peptide backbones.     

Ultrasonication-assisted sorption of cadmium from aqueous phase by wheat bran

In the present study, the sorption of cadmium from aqueous phase by wheat bran was investigated with and without the assistance of ultrasound. Kinetic data and sorption equilibrium isotherms were carried out in batch conditions. The influence of different operating parameters such as ultrasonic power, cadmium initial concentration, sorbent mass, temperature, and the combination of ultrasound and mechanical stirring on the kinetics of cadmium removal was studied. The obtained results show that the ultrasonic irradiation significantly enhances and improves the efficiency of the removal of cadmium, especially in the combined method. The sorption kinetic data were found to be well-represented by the pseudo-second-order rate equation, both in the absence and presence of ultrasound as well as in the combined process (stirring and ultrasonication). Ultrasonic power played a key role in the removal of cadmium. Equilibrium isotherm results could be well described by the Langmuir model both with and without the assistance of ultrasound. The effect of temperature on the sorption isotherms of cadmium in the absence and presence of ultrasound has been also studied and the thermodynamic parameters DeltaG degrees, DeltaH degrees, and DeltaS degrees were determined. The monolayer sorption capacities were 51.81, 35.09, and 22.78 mg g(-1) for experiments conducted by the combined process, in the presence of ultrasound, and in passive conditions, respectively. The combination ultrasound-stirring for the sorption process was shown to be of interest for the treatment of wastewaters contaminated with cadmium.     

A multi-channel bioluminescent bacterial biosensor for the on-line detection of metals and toxicity. Part II: technical development and proof of concept of the biosensor

This research study deals with the on-line detection of heavy metals and toxicity within the context of environmental pollution monitoring. It describes the construction and the proof of concept of a multi-channel bioluminescent bacterial biosensor in immobilized phase: Lumisens3. This new versatile device, designed for the non-stop analysis of water pollution, enables the insertion of any bioluminescent strains (inducible or constitutive), immobilized in a multi-well removable card. The technical design of Lumisens3 has benefited from both a classical and a robust approach and includes four main parts: (1) a dedicated removable card contains 64 wells, 3 mm in depth, arranged in eight grooves within which bacteria are immobilized, (2) this card is incubated on a Pelletier block with a CCD cooled camera on top for bioluminescence monitoring, (3) a fluidic network feeds the card with the sample to be analyzed and finally (4) a dedicated computer interface, BIOLUX 1.0, controls all the elements of the biosensor, allowing it to operate autonomously. The proof of concept of this biosensor was performed using a set of four bioluminescent bacteria (Escherichia coli DH1 pBzntlux, pBarslux, pBcoplux, and E. coli XL1 pBfiluxCDABE) in the on-line detection of CdCl₂ 0.5 μM and As₂O₃ 5 μM from an influent. When considering metals individually, the “fingerprints” from the biosensor were as expected. However, when metals were mixed together, cross reaction and synergistic effects were detected. This biosensor allowed us to demonstrate the simultaneous on-line cross detection of one or several heavy metals as well as the measurement of the overall toxicity of the sample.     

Profiling and quantification of Drosophila melanogaster lipids using liquid chromatography/mass spectrometry

We present here the findings of global profiling of Drosophila lipids using liquid chromatography/tandem mass spectrometry (LC/MS/MS) on an LTQ-Orbitrap instrument. In addition, we present a multiple reaction monitoring (LC-MRM) method for the absolute quantification of the major phosphatidylethanolamine (PE) and phosphatidylcholine (PC) lipids of Drosophila. Using both normal- and reversed-phase LC followed by accurate mass analysis and MS/MS on an LTQ-Orbitrap instrument, we evaluated the lipid composition of the fruit fly Drosophila melanogaster. A total of 74 lipid species were identified consisting of glycerphospholipids belonging to the PE, PC, phosphatidylglycerol (PG), phosphatidylinositol (PI) and phosphatidylserine (PS) classes including several plasmanyl PE species, as well as triacylglycerides, cardiolipins, ceramides, and PE ceramides. Individual PE and PC phospholipids were then quantified using an LC-MRM approach. Reversed-phase chromatography followed by monitoring on a QTrap 4000 instrument of 21 MRM transitions combined with calibration curves constructed using internal standards enabled the absolute quantification of 28 PE and PC lipid species with limits of quantification of 3 and 5 pg/μL, respectively. Internal standards accounted for the differences in ionization efficiencies of PE and PC phospholipids, facilitating more accurate lipid abundance measurements. The method presented here builds on previous Drosophila work by making the quantification of absolute lipid abundance possible and will be of interest to scientists who study variation and changes in the degree of unsaturation, fatty acid carbon length, and head-group concentration among individuals of different genotypes in response to environmental, genetic, or physiological perturbation in small insects. It will also be particularly useful to biologists interested in adaptation and acclimation of cellular membranes in response to thermal heterogeneity.     

Multiple-reaction monitoring liquid chromatography mass spectrometry for monosaccharide compositional analysis of glycoproteins

A simple, sensitive, and rapid quantitative LC-MS/MS assay was designed for the simultaneous quantification of free and glycoprotein bound monosaccharides using a multiple reaction monitoring (MRM) approach. This study represents the first example of using LC-MS/MS methods to simultaneously quantify all common glycoprotein monosaccharides, including neutral and acidic monosaccharides. Sialic acids and reduced forms of neutral monosaccharides are efficiently separated using a porous graphitized carbon column. Neutral monosaccharide molecules are detected as their alditol acetate anion adducts [M + CH₃CO₂]⁻ using electrospray ionization in negative ion MRM mode, while sialic acids are detected as deprotonated ions [M − H]⁻. The new method exhibits very high sensitivity to carbohydrates with limits of detection as low as 1 pg for glucose, galactose, and mannose, and below 10 pg for other monosaccharides. The linearity of the described approach spans over three orders of magnitudes (pg to ng). The method effectively quantified monosaccharides originating from as little as 1 μg of fetuin, ribonuclease B, peroxidase, and α ₁-acid glycoprotein human (AGP) with results consistent with literature values and with independent CE-LIF measurements. The method is robust, rapid, and highly sensitive. It does not require derivatization or postcolumn addition of reagents.