A virtual instrumentation based protocol for the automated implementation of the inner field compensation method

One influential parameter which mediates interactions between many types of molecules and biological membranes stems from the lumped contributions of the transmembrane potential, dipole potential and the difference in the surface potentials on both sides of a membrane. With relevance to cell physiology, such electrical features of a biomembrane are prone to undergoing changes as a result of interactions with the aqueous surrounding. Among the most useful tools devoted to exploring changes of electrical parameters of a lipid membrane induced by certain extracellular ions, lipid composition, and embedded membrane peptides and proteins, are spectroscopic imaging and the inner field compensation (IFC) method. In this work we layout the principles of a fully computerized version of the IFC method, which makes it more readily available to users. As a direct application, we deployed this improved version of the IFC method to time-resolve changes induced by alamethicin monomers upon membrane dipole potential, following their aggregation within an artificial lipid membrane. Intriguingly, even prior crossing the membrane core, the membrane-bound alamethicin monomers are shown to significantly increase the dipole potential of the monolayer they reside in. Such data further emphasize the yet less-explored interplay between membrane-based protein and peptides, and the membrane dipole potential.     

Colloidal nano-MOFs nucleate and stabilize ultra-small quantum dots of lead bromide perovskites

The development of synthetic routes to access stable, ultra-small (i.e. <5 nm) lead halide perovskite (LHP) quantum dots (QDs) is of fundamental and technological interest. The considerable challenges include the high solubility of the ionic LHPs in polar solvents and aggregation to form larger particles. Here, we demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites. Cr₃O(OH)(H₂O)₂(terephthalate)₃ (Cr-MIL-101), made of large mesopore-sized pseudo-spherical cages, allows fast and efficient diffusion of perovskite precursors within its pores, and promotes the formation of stable, ∼3 nm-wide lead bromide perovskite QDs. CsPbBr₃, MAPbBr₃ (MA⁺ = methylammonium), and (FA)PbBr₃ (FA⁺ = formamidinium) QDs exhibit significantly blue-shifted emission maxima at 440 nm, 446 nm, and 450 nm, respectively, as expected for strongly confined perovskite QDs. Optical characterization and composite modelling confirm that the APbBr₃ (A = Cs, MA, FA) QDs owe their stability within the MIL-101 nanocrystals to both short- and long-range interfacial interactions with the MOF pore walls.

We demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites.     

An optimized sampling and GC-MS analysis method for benzene in exhaled breath, as a biomarker for occupational exposure

Benzene is known to be toxic and carcinogenic: therefore, in case of exposure to benzene vapours, a reliable biological monitoring procedure is needed, particularly in the field of occupational hygiene. The determination of the concentration of benzene in the exhaled air 8 h after the exposure has been demonstrated to be a significant biomarker, even for low concentrations of airborne benzene vapours. This work presents a sampling and analysis method that optimizes previously described procedures: in the sampling phase, a double-step sample collection in Tedlar bags is used, in order to remove the breath moisture and to standardise the sample volumes. The analytical phase uses a cryogenic trap for the concentration of the air samples to be injected in the GC-MS, without the need for trapping materials, significantly reducing time and costs of the analysis and improving sensitivity. The presented method has been successfully applied to the biological monitoring of a mixed population (occupationally exposed and not exposed subjects, smokers and non-smokers), with a lower detection limit of 1.5 ng of benzene per litre of exhaled air, that is 1/200 of the biological exposure index recommended by the American Conference of Governmental Hygienists.     

Reverse micellar aggregates: effect on ketone reduction. 2. Surfactant role

Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface.     

Synthesis of 4H-3,1-benzoxazines, quinazolin-2-ones, and quinoline-4-ones by palladium-catalyzed oxidative carbonylation of 2-ethynylaniline derivatives

An effective and straightforward approach to the synthesis of 4H-3,1-benzoxazines 3 and 4, quinazolin-2-ones 5, and quinoline-4-one derivatives 6 and 7 is provided by palladium-catalyzed cyclization-alkoxycarbonylation of variously substituted 2-(trimethylsilanyl)ethynylaniline amide or urea derivatives 2. Reactions are carried out in 7:1 MeCN/MeOH at 65 or 75 degrees C in the presence of catalytic amounts of 10% Pd/C in conjunction with Bu(4)NI and KF and under 2.4 MPa of a 3:1 mixture of CO and air. Anti and syn 6-exo-dig cyclization modes account for the formation of the two stereoisomers. Isomerization of the vinylpalladium intermediate may occur as well. Formation of a double carbonylation product 7r and of a gem-dimethoxycarbonylation product 6s, whose structures have been determined by X-ray diffraction analysis, is justified through an unusual type of rearrangement.     

High resolution electrospray and electrospray tandem mass spectra of rotenone and its isoxazoline cycloadducts

An evaluation of the gas-phase ion chemistry of rotenone (1) by electrospray ionisation (ESI) mass spectrometry (MS) and tandem mass spectrometry (MS2) is presented, aiming at providing tools for its determination in natural and biological matrices. The behaviour of its cycloadducts with benzonitrile-N-oxide (2) and 2,4,6-trimethylbenzonitrile-N-oxide (3) was also evaluated and the MS data thus obtained have provided evidence into the mechanism of formation of the key product ion at m/z 192 which can be considered a marker in the MS and MS2 spectra of rotenone and its derivatives.     

Effects of the shutdown of a nuclear fuel reprocessing plant on nearby streams

In a study conducted in 1971, levels of tritium were found in Cattaraugus-Creek, a stream in Western New York State. This material was attributed to the operation in West Valley, New York of the world's first commercial nuclear fuels reprocessing plant. Several fission fragment isotopes in addition to tritium were also observed in Buttermilk Creek, one of the tributaries of Cattaraugus Creek that runs through the reprocessing plant grounds. The plant ceased processing nuclear fuel in December 1971, and a new set of measurements in these streams were made to assess the effect of the ending of the plant's operation. Substantially lower concentrations of tritium and no fission produced isotopes have been observed.     

Synthesis of novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]‐pyrazoles and 5H‐pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines as potential antiproliferative agents

The synthesis of new planar derivatives characterized by the presence of a pyridothiopyranopyrazole or pyridothiopyranopyrimidine nucleus, carrying a substituted aryl group, is reported. The novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]pyrazole derivatives were obtained by condensation of 2,3‐dihydro‐3‐hydroxymethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones with appropriate hydrazines. The preparation of 2‐substituted pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines was accomplished from the intermediate 2,3‐dihy‐dro‐3‐dimethylaminomethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones by reaction with the appropriate binucleophile amidines. The antiproliferative activity of some new products was tested by an in vitro assay on human tumour cell lines (HL‐60 and HeLa), but none of them showed any significant effects in the tests performed. Accordingly, linear flow dichroism measurements indicated their inability to form a molecular complex with DNA.     

Simple and efficient chemoselective mild deprotection of acetals and ketals using cerium(III) triflate

A new and chemoselective method for the cleavage of alkyl and cyclic acetals and ketals at room temperature in wet nitromethane by using catalytic cerium(III) trifluoromethane sulfonate is presented. The high yields, the observed selectivity, the very gentle reaction conditions, and the almost neutral pH make this procedure particularly attractive for multistep synthesis.