Susceptibility to Effects of UVB Irradiation on Induction of Contact Sensitivity, Relevance of Number and Function of Langerhans Cells and Epidermal Macrophages

Sensitization on skin exposed to acute low-dose UVB irradiation separates normal humans into two phenotypically distinct groups: One group, following sensitization on UVB-irradiated skin, develops contact sensitivity, designated UVB resistant (UVB-R) and the second group, following sensitization on UVB-irradiated skin, fails to develop contact sensitivity, designated UVB susceptible (UVB-S). To investigate whether UVB susceptibility in humans is related to antigen-presenting activity in the skin we studied the effect of UVB irradiation on the number and function of the epidermal antigen-presenting cells in volunteers identified as UVB-R and UVB-S. Single cell suspensions of epidermal cells from control skin and skin exposed to 3 minimal erythema doses (MED) of UVB 3 days previously were stained for Langerhans cells (CD1a+HLA-DR+) and epidermal macrophages (CD1a-HLA-DR+). The UVB exposure of the skin significantly decreased the percentage of Langerhans cells (UVB-R: n = 7, P < 0.02, UVB-S: n = 6, P < 0.03) and increased the percentage of epidermal macrophages (UVB-R: n = 7, P < 0.03, UVB-S: n = 6, P < 0.03) however to the same degree in both the UVBR and the UVB-S group. To study the effect on Langerhans cell alloreactivity, epidermal cells were harvested immediately after UVB irradiation. However, in both UVB-R and UVB-S subjects the Langerhans cell alloreactivity was blocked to the same degree immediately after UVB irradiation compared to nonirradiated epidermal cells. To determine the effect of UVB irradiation on epidermal macrophages, epidermal cells were harvested 3 days after UVB irradiation. Irradiated epidermal cells from both UVB-R and UVB-S subjects demonstrated a strong antigen-presenting capacity compared to epidermal cells from control skin leading to activation of T cells that mainly secrete interferon (1FN)-γ and not interleukin (IL)-4. In conclusion we found that UVB susceptibility was not correlated with the number of Langerhans cells or epidermal macrophages in the skin at the same time of sensitization. Neither was it correlated with the capacity of Langerhans cells nor UVB-induced epidermal macrophages to activate T cells in vitro.     

Stainless steel modified with poly(ethylene glycol) can prevent protein adsorption but not bacterial adhesion

The surface of AISI 316 grade stainless steel (SS) was modified with a layer of poly(ethylene glycol) (PEG) (molecular weight 5000) with the aim of preventing protein adsorption and bacterial adhesion. Model SS substrates were first modified to introduce a very high density of reactive amine groups by the adsorption of branched poly(ethylenimine) (PEI) from water. Methoxy-terminated aldehyde-poly(ethylene glycol) (M-PEG-CHO) was then grafted onto the PEI layers using reductive amination at the lower critical solution temperature (LCST) of the PEG in order to optimize the graft density of the linear PEG chains. The chemical composition and uniformity of the surfaces were determined using X-ray photoelectron spectroscopy (XPS) and time-of-flight static secondary ion mass spectrometry (ToF-SSIMS) in the imaging mode. The effects of PEI concentration and different substrate pre-cleaning methods on the structure and stability of the final PEG layer was examined. Piranha solution proved to be the most effective method for removing adventitious hydrocarbon contamination, compared to cleaning with ultrasonication in organic solvents, and was the SS substrate that produced the most stable and thickest PEI layer. The surface density of PEI was shown to increase with increasing PEI concentration (up to 30 mg/ml), as determined from XPS measurements, and subsequently produced the PEG layer with the highest density of attached chains. In model experiments using β-lactoglobulin no protein adsorption was detected on the optimized PEG surface as determined by XPS and ToF-SSIMS analysis. However, neither the adhesion of a Gram-negative (Pseudomonas sp.) nor a Gram-positive (Listeria monocytogenes) bacterium was affected by the coating as equal numbers adhered to all surfaces tested. Our results show that preventing protein adsorption is not a prerequisite stopping bacterial adhesion, and that other mechanisms most likely play a role.     

Pseudochelin A,a siderophore of Pseudoalteromonas piscicida S2040

A new siderophore containing a 4,5-dihydroimidazole moiety was isolated from Pseudoalteromonas piscicida S2040 together with myxochelins A and B, alteramide A and its cycloaddition product, and bromo- and dibromoalterochromides. The structure of pseudochelin A was established by spectroscopic techniques including 2D NMR and MS/MS fragmentation data. In bioassays selected fractions of the crude extract of S2040 inhibited the opportunistic pathogen Pseudomonas aeruginosa. Pseudochelin A displayed siderophore activity in the chrome azurol S assay at concentrations higher than 50 μM, and showed weak activity against the fungus Aspergillus fumigatus, but did not display antibacterial, anti-inflammatory or anticonvulsant activity.     

A Thioxanthone Sensitizer with a Chiral Phosphoric Acid Binding Site: Properties and Applications in Visible Light-Mediated Cycloadditions

A chiral phosphoric acid with a 2,2’-binaphthol core was prepared that displays two thioxanthone moieties at the 3,3’-position as light-harvesting antennas. Despite its relatively low triplet energy, the phosphoric acid was found to be an efficient catalyst for the enantioselective intermolecular [2+2] photocycloaddition of β-carboxyl-substituted cyclic enones (e.r. up to 93:7). Binding of the carboxylic acid to the sensitizer is suggested by NMR studies and by DFT calculations to occur by means of two hydrogen bonds. The binding event not only enables an enantioface differentiation but also modulates the triplet energy of the substrates.     

High Na+ Mobility in rGO Wrapped High Aspect Ratio 1D SbSe Nano Structure Renders Better Electrochemical Na+ Battery Performance

We chose to understand the cyclic instability and rate instability issues in the promising class of Na⁺ conversion and alloying anodes with Sb₂Se₃ as a typical example. We employ a synthetic strategy that ensures efficient rGO (reduced graphene oxide) wrapping over Sb₂Se₃ material. By utilization of the minimum weight of additive (5 wt.% of rGO), we achieved a commendable performance with a reversible capacity of 550 mAh g⁻¹ at a specific current of 100 mA g⁻¹ and an impressive rate performance with 100 % capacity retention after high current cycling involving a 2 Ag⁻¹ intermediate current step. The electrochemical galvanostatic intermittent titration technique (GITT) has been employed for the first time to draw a rationale between the enhanced performance and the increased mobility in the rGO wrapped composite (Sb₂Se₃-rGO) compared to bare Sb₂Se₃. GITT analysis reveals higher Na⁺ diffusion coefficients (approx. 30 fold higher) in the case of Sb₂Se₃-rGO as compared to bare Sb₂Se₃ throughout the operating voltage window. For Sb₂Se₃-rGO the diffusion coefficients in the range of 8.0×10⁻¹⁵ cm² s⁻¹ to 2.2×10⁻¹² cm² s⁻¹ were observed, while in case of bare Sb₂Se₃ the diffusion coefficients in the range of 1.6×10⁻¹⁵ cm² s⁻¹ to 9.4×10⁻¹⁵ cm² s⁻¹ were observed.     

Validation of a simple liquid chromatographic method for determination and quantitation of residual ivermectin and doramectin in pig liver

A rapid and quantitative method for the extraction, derivatization, and liquid chromatography with fluorescence detection of ivermectin (IVM) and doramectin (DOM) residues in porcine liver was developed and validated. IVM and DOM were extracted from the liver samples with acetonitrile, the supernatant was evaporated to dryness at 37 degrees C under nitrogen, and the residue was reconstituted in 1-methylimidazole solution. After 2 min at room temperature, IVM and DOM were converted to a fluorescent derivative and then separated on a Hypersil ODS column. The derivatives of IVM and DOM were detected and quantitated with high specificity by fluorescence (excitation: 365 nm, emission: 475 nm). Abamectin was used as an internal standard. The mean extraction efficiencies from fortified samples (15 ng/g) were 75% for IVM and 70% for DOM. The limit of detection was 0.8 ng/g for both IVM and DOM.     

Initial State Interaction in the (π+,3p) Reaction on N, Ar and Xe

The pion absorption reaction (π^{+,3 p} ) on Ar was studied at pion energies of 70, 118, 162 and 239 MeV, and on N and Xe at 239 MeV. The 3p cross section with a 50 MeV cut on the missing energy is presented. The existence of an initial state interaction (ISI) component to the reaction was investigated. The portion of the 3p cross section assigned to the ISI process is less than one half and at lower energies significantly so. Received: 11 December 1997     

Efficient copper-catalyzed Sonogashira coupling reactions and simulation studies

A practical copper-catalyzed I-substitutions of alkyl-2-iodobenzoates with alkynes have been developed using Cu powder as a catalyst under solvent, cocatalyst, and base-free conditions. This reaction system is new, facile, efficient, and economical that gives Sonogashira coupling products in excellent yields (up to 97%). The coupled products (A–J) were characterized by CHNS, ¹H NMR, and ¹³C NMR and are found soluble in ethyl acetate and dichloromethane. In addition, simulation studies of A–J were performed with aspulvinone dimethylallyltransferase enzyme and observe good binding affinity. The reported compounds may act as anti-cizmatics, anti-fobic in future and also have the inhibition of aspulvinone dimethylallyltransferase properties to control Alzheimer’s, Schizophrenia, etc. diseases.     

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.