Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques

The investigation of europium(III) sulphate hydrate and samarium(III) sulphate hydrate was performed by thermal analysis (TG-DTG) and simultaneous infrared evolved gas analysis-Fourier transformed infrared (EGA-FTIR) spectroscopy. The TG, DTG and DTA curves were recorded at the 25–1400 °C in the dynamic air atmosphere by TG/DTA analyser. The infrared evolved gas analysis was obtained on the FTIR spectrometer. Eu₂(SO₄)₃·nH₂O (n = 3.97) and Sm₂(SO₄)₃·nH₂O (n = 8.11) were analysed, the dehydration and decomposition steps were investigated and the water content was calculated. The formation of different oxysulphates was studied.

The trace rare earth elements in Eu and Sm sulphates were determined by ICP-MS. The concentration of trace Eu, Sm, La, Gd, Y and Ce ranged from 3.9 × 10⁻⁶ to 1.5 × 10⁻⁴% (m/m).     

Extension of the self-consistent spectrophotometric basicity scale in acetonitrile to a full span of 28 pKa units: unification of different basicity scales

The earlier compiled self-consistent spectrophotometric basicity scale in acetonitrile (AN) was expanded to range from 3.8 to 32.0 pK(a) units, that is 28 orders of magnitude. Altogether 54 new relative basicity measurements (DeltapK(a) measurements) were carried out and 37 new compounds were introduced to the scale (it now includes altogether 89 bases). The relative basicity of any two bases in the scale can be obtained by combining at least two independent sets of measurements. Multiple overlapping measurements make the results more reliable. The overall consistency (as defined earlier) of the measurements is s = 0.03 pK(a) units. Thorough analysis of all of our experimental data (DeltapK(a) values of this and earlier works) and experimental pK(a) data in AN available in the literature (works from the groups of Coetzee and Padmanabhan, Kolthoff and Chantooni, Jr., the Schwesinger group, Bren' et al. and some others, altogether 19 papers) was carried out. On the basis of this analysis the anchor point of the scale-pyridine-was shifted upward by 0.20 pK(a) units thereby also revising the absolute pK(a) values of all the bases on the scale. This way very good agreement between our relative data and the absolute pK(a) values of the abovementioned authors was obtained. The revised basicity scale was interconnected with the earlier published self-consistent acidity scale by DeltapK(a) measurements between acids and bases. The rms deviation between the directly measured DeltapK(a) values and the absolute pK(a) values of the compounds was 0.10 pK(a) units.     

An Organoruthenium Anticancer Agent Shows Unexpected Target Selectivity For Plectin

Organometallic metal(arene) anticancer agents require ligand exchange for their anticancer activity and this is generally believed to confer low selectivity for potential cellular targets. However, using an integrated proteomics-based target-response profiling approach as a potent hypothesis-generating procedure, we found an unexpected target selectivity of a ruthenium(arene) pyridinecarbothioamide (plecstatin) for plectin, a scaffold protein and cytolinker, which was validated in a plectin knock-out model in vitro. Plectin targeting shows potential as a strategy to inhibit tumor invasiveness as shown in cultured tumor spheroids while oral administration of plecstatin-1 to mice reduces tumor growth more efficiently in the invasive B16 melanoma than in the CT26 colon tumor model.     

Branches of positive solutions of quasilinear elliptic equations on non-smooth domains

We prove existence of an unbounded global branch (i.e. connected set) of weak solutions of a second order quasilinear equation depending on a real parameter λ$\lambda$ on an arbitrary (possibly non-smooth) bounded domain in R^N${\mathbb{R}}^N$, with a Leray–Lions operator as the leading part. Here, we can allow lower order nonlinearities which depend on first derivatives, satisfying appropriate growth conditions including the critical case. Furthermore, we give sufficient conditions for the existence of a branch consisting entirely of nonnegative solutions for positive λ$\lambda$. Our approach also yields a new existence result in the case of critical growth in derivatives of lower order.     

Uncertainty sources in UV-Vis spectrophotometric measurement

An overview is given of the most important uncertainty sources that affect analytical UV-Vis spectrophotometric measurements. Altogether, eight uncertainty sources are discussed that are expected to have influence in chemical analysis. It is demonstrated that the well-known intrinsic (or “physical”) sources of uncertainty that originate from the instrument itself (repeatability of spectrophotometer reading, spectrophotometer drift, stray light, etc.) often have significantly lower contributions to the combined uncertainty of the result than the “chemical” sources of uncertainty that originate from the object under study (interference from the constituents of the matrix, decomposition of the photometric complex, etc.). Although selectivity of a photometric procedure is often considered more a validation topic than an uncertainty topic, it is very often important to include it also in the uncertainty budget.Usually the most difficult part of uncertainty estimation of a chemical measurement result is to evaluate the magnitude of the actual uncertainty components, especially the chemical ones. For most of the uncertainty sources discussed in this paper, approaches for their evaluation are given. A generic uncertainty budget for absorbance is presented. Electronic Supplementary Material Supplementary material is available for this article at     

A comprehensive self-consistent spectrophotometric acidity scale of neutral Brønsted acids in acetonitrile

For the first time, the self-consistent spectrophotometric acidity scale of neutral Br?nsted acids in acetonitrile (AN) spanning 24 orders of magnitude of acidities is reported. The scale ranges from pK(a) 3.7 to 28.1 in AN. The scale includes 93 acids that are interconnected by 203 relative acidity measurements (DeltapK(a) measurements) and contains compounds with gradually changing acidities, including representatives from all of the conventional families of OH (alcohols, phenols, carboxylic acids, sulfonic acids), NH (anilines, diphenylamines, disulfonimides), and CH acids (fluorenes, diphenylacetonitriles, phenylmalononitriles). The CH acids were particularly useful in constructing the scale because they do not undergo homo- or heteroconjugation processes and their acidities are rather insensitive to traces of water in the medium. The scale has been fully cross-validated: the relative acidity of any two acids on the scale can be found by combining at least two independent sets of DeltapK(a) measurements. The consistency standard deviation of the scale is 0.03 pK(a) units. Comparison of acidities in many different media has been carried out, and the structure-acidity relations are discussed. The large variety of the acids on the scale, its wide span, and the quality of the data make the scale a useful tool for further acidity studies in acetonitrile.     

ISO 17025 quality system in a university environment

The experience of working under an ISO 17025 compliant quality system in a university environment is described in the example of the Testing Centre of University of Tartu. University-specific features of the quality system include that the Testing Centre acts as the “quality system server” for other units of the university and graduate students participate in the work carried out under the quality system. The benefits for the university and the graduate students are discussed. It is concluded that implementation of an ISO 17025 compatible quality system in a university is fully accomplishable and gives significant added value to the university by helping to destroy the ivory tower perception about universities and by introducing real-world flavour into the studies and broaden the minds (quality awareness) of the students.     

Thermal and infrared spectroscopic characterization of historical mortars

The characterization of historical mortars was performed by thermal analysis (TG-DTG), simultaneous infrared spectroscopy (TG-FTIR) and inductively coupled plasma atomic emission spectrometry (ICP-AES). The samples were taken from St. John Church (Tartu, Estonia), built in the 13th–14th centuries. The analyses are important for the restoration of the church.

In reality, mortar is a very difficult system, the lime is accompanied with different hydraulic components. TG-DTG analysis and FTIR methods can be used to identify various components of mortar and to observe the reactions associated with the controlled heating at 25–900°C in dynamic air and nitrogen atmosphere. The elemental composition of the acid-soluble components (ASC) was determined by using the ICP-AES techniques.