Analysis of cocaine and its principal metabolites in waste and surface water using solid-phase extraction and liquid chromatography–ion trap tandem mass spectrometry

A validated method based on solid-phase extraction (SPE) and liquid chromatography-ion trap tandem mass spectrometry (LC-MS/MS) is described for the determination of cocaine (COC) and its principal metabolites, benzoylecgonine (BE) and ecgonine methyl ester (EME), in waste and surface water. Several SPE adsorbents were investigated and the highest recoveries (95.7 +/- 5.5, 91.8 +/- 2.2 and 72.5 +/- 5.3% for COC, BE and EME, respectively) were obtained for OASIS HLB(R) cartridges (6 mL/500 mg) using 100 mL of waste water or 500 mL of surface water. Extracts were analysed by reversed-phase (RP) or hydrophilic interaction (HILIC) LC-MS/MS in positive ion mode with multiple reactions monitoring (MRM); the latter is the first reported application of the HILIC technique for drugs of abuse in water samples. Corresponding deuterated internal standards were used for quantification. The method limits of quantification (LOQs) for COC and BE were 4 and 2 ng L(-1), respectively, when RPLC was used and 1, 0.5 and 20 ng L(-1) for COC, BE and EME, respectively, with the HILIC setup. For COC and BE, the LOQs were below the concentrations measured in real water samples. Stability tests were conducted to establish the optimal conditions for sample storage (pH, temperature and time). The degradation of COC was minimal at -20 degrees C and pH = 2, but it was substantial at +20 degrees C and pH = 6. The validated method was applied to a set of waste and surface water samples collected in Belgium.     

Cobalt‐Catalyzed Coupling of Benzoic Acid C−H Bonds with Alkynes,Styrenes, and 1,3‐Dienes

A method for cobalt‐catalyzed, carboxylate‐directed functionalization of arene C?H bonds is reported. Alkynes, styrenes, and 1,3‐dienes can be coupled with benzoic acids to provide cyclic products in good yields. The reactions proceed in the presence of a cobalt(II) hexafluoroacetylacetonate catalyst, (TMS)₂NH base, Ce(SO₄)₂ cooxidant, and oxygen oxidant.     

Cobalt‐Catalyzed,Aminoquinoline‐Directed C(sp2)?H Bond Alkenylation by Alkynes

A method for cobalt‐catalyzed, aminoquinoline‐ and picolinamide‐directed C(sp²) H bond alkenylation by alkynes was developed. The method shows excellent functional‐group tolerance and both internal and terminal alkynes are competent substrates for the coupling. The reaction employs a Co(OAc)₂⋅4 H₂O catalyst, Mn(OAc)₂ co‐catalyst, and oxygen (from air) as a terminal oxidant.     

Real-time separation of natural products by ultrafast 2D NMR coupled to on-line HPLC

Hyphenated HPLC-NMR is an extremely efficient analytical tool, which makes it possible to perform on-flow experiments where 1D NMR spectra are obtained in real time as the analytes are separated and eluted from the chromatographic column. However, it is incompatible with multidimensional NMR methods that form an indispensible tool for the study of complex mixtures. Recently, Frydman and co-workers have proposed an ultrafast 2D NMR approach, where a complete 2D NMR correlation can be recorded in a single scan, thus providing a solution to the irreversibility of hyphenated techniques. This paper presents the first implementation of on-line ultrafast HPLC-NMR. Ultrafast COSY spectra are acquired every 12 s in the course of a chromatographic run performed on a mixture of natural aromatic compounds. The results, obtained on a commercial HPLC-NMR setup, highlight the generality of the ultrafast HPLC-NMR methodology, thus opening the way to a number of applications in the numerous fields in which HPLC-NMR forms a routine analytical tool.     

Metabolic phenotyping of human plasma by 1H‐NMR at high and medium magnetic field strengths: a case study for lung cancer

Accurate identification and quantification of human plasma metabolites can be challenging in crowded regions of the NMR spectrum with severe signal overlap. Therefore, this study describes metabolite spiking experiments on the basis of which the NMR spectrum can be rationally segmented into well‐defined integration regions, and this for spectrometers having magnetic field strengths corresponding to ¹H resonance frequencies of 400 MHz and 900 MHz. Subsequently, the integration data of a case–control dataset of 69 lung cancer patients and 74 controls were used to train a multivariate statistical classification model for both field strengths. In this way, the advantages/disadvantages of high versus medium magnetic field strength were evaluated. The discriminative power obtained from the data collected at the two magnetic field strengths is rather similar, i.e. a sensitivity and specificity of respectively 90 and 97% for the 400 MHz data versus 88 and 96% for the 900 MHz data. This shows that a medium‐field NMR spectrometer (400–600 MHz) is already sufficient to perform clinical metabolomics. However, the improved spectral resolution (reduced signal overlap) and signal‐to‐noise ratio of 900 MHz spectra yield more integration regions that represent a single metabolite. This will simplify the unraveling and understanding of the related, disease disturbed, biochemical pathways. Copyright © 2017 John Wiley & Sons, Ltd.     

Gerrymander-proof representative democracies

International Journal of Game Theory - This article is devoted to the analysis of electoral systems involving two step procedures. It appears that designers are able to manipulate the result of...     

The CONV method for pricing options

In this paper, we discuss a convolution based method, the CONV method, for pricing options with early-exercise features, in which the asset prices are modeled by Lévy processes. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

A review on the thermal stability of calcium apatites

High temperature processing is essential for the preparation of apatites for biomaterials, lighting, waste removal and other applications. This requires a good understanding of the thermal stability and transitions upon heating. The most widely used is hydroxyapatite (HAp), but increasing interest is being directed to fluorapatite (FAp) and chlorapatite (ClAp). The structural modifications for substitutions are discussed to understand the temperature processing range for the different apatites. This is based on a review of the literature from the past few decades, together with recent research results. Apatite thermal stability is mainly determined by the stoichiometry (Ca/P ratio and structural substitutions) and the gas composition during heating. Thermal stability is lowered the most by a substitution of calcium and phosphate, leading to loss in phase stability at temperatures less than 900?°C. The anions in the hexagonal axis, OH in HAp, F in FAp and Cl in ClAp are the last to leave upon heating, and prevention of the loss of these groups ensures high temperature stability. The information discussed here will assist in understanding the changes of apatites during heating in calcination, sintering, hydrothermal processing, plasma spraying, flame pyrolysis, and other high-temperature processes.