A high performance liquid chromatography – inductively coupled plasma-mass spectrometry interface employing desolvation for speciation studies of platinum in chemotherapy drugs

A novel interface between high performance liquid chromatography (HPLC) and inductively coupled plasma-mass spectrometry (ICP-MS) is described. The eluent from the HPLC is nebulised into a heated cyclone spray-chamber and the solvent removed using a Nafion membrane drier, held at 75 degrees C, and a cryogenic condenser. The condenser consists of 6 Peltier heat pumps connected to liquid cooled aluminium blocks. At a nebuliser gas flow rate of 0.6 l min(-1), the membrane drier removes 58% of the vapour and the Peltier condenser 75% of the remaining vapour, i.e. a total desolvation efficiency of 89%. This enables the use of HPLC solvents which otherwise would destabilise the ICP, e.g. 100% acetonitrile or methanol, and permits the use of solvent gradients with minimal baseline drift. The system has been applied to the determination of platinum species in an organoplatinum drug used for chemotherapy in human plasma ultrafiltrate of patients treated with this new drug (JM-216). The limit of detection for platinum species has been 0.6 ng nl(-1) (i.e. 120 pg of Pt) and several species have been separated with good resolution.     

The determination of lead in environmental samples by slurry atomization-graphite furnace-atomic absorption spectrophotometry using matrix modification

Lead has been determined in three certified reference materials (aquatic plant, olive leaves, and mussel tissue) by direct slurry atomization-graphite furnace atomic absorption spectrophotometry. The importance of using ascorbic acid as matrix modifier has been demonstrated, particularly to overcome calcium interferences. Using 0.05 M ascorbic acid and aqueous calibration standards excellent agreement was found with certified values. The method is proposed for general application in environmental analysis.     

SPOCC-194, a new high functional group density PEG-based resin for solid-phase organic synthesis

A novel polymer matrix for solid-phase synthesis, SPOCC(194) resin (1), was designed featuring a backbone of homogeneous tetraethylene glycol (TEG(194)) macromonomer linked by quaternary carbon junctions and terminating in primary alcohol functionality. Beaded SPOCC(194) resin was effectively prepared by suspension polymerization of oxetanylated TEG macromonomer 5 in stirred silicon oil. Mechanically stable and inert to a diverse range of reaction conditions, SPOCC(194) possessed a high hydroxyl group loading (0.9-1.2 mmol/g) for substrate attachment and swelled effectively ( approximately 2-4 mL/g) in a variety of organic and aqueous solvents. Developed for solid-phase synthesis at high reactant concentrations for driving organic and aqueous reactions to completion, SPOCC(194) exhibited high functional group density (mmol/mL) similar to that of low-loaded aminomethylated polystyrene-divinylbenzene copolymer (PS-1%DVB) yet significantly higher than that of PEGA(1900), SPOCC(1500), and TentaGel S. High-resolution MAS NMR spectra of Fmoc-derivatized SPOCC(194) indicate that monitoring of functional group transformation is possible. Moreover, by employment of a nonaromatic resin-linker combination, electrophilic chemistry, such as Lewis acid catalyzed glycosylation and Friedel-Crafts acylation, was selectively performed on substrate bound to SPOCC(194) resin. Such properties make SPOCC(194) resin a promising new polymer matrix for the support-bound construction of small organic molecules by parallel and combinatorial synthesis and the scavenging of solution-phase reactants or byproducts.     

Complete ozonolysis of alkyl substituted ethenes at -60 degrees C: distributions of ozonide and oligomeric products

The distribution of ozonide and oligomeric structures formed on complete ozonolysis of alkenes in a non-participating solvent at -60 degrees C is governed by the alkyl substitution around the carbon-carbon double bond. The ozonolysis of a 1,1-alkyl substituted ethene generally favours the formation of an ozonide (a 1,2,4-trioxolane). Whereas the ozonolysis of a 1,1,2-alkyl substituted ethene also produces ozonide, a considerable amount of the ozonised products are oligomeric in nature. For example, the ozonolysis of 3-methylpent-2-ene in solution to high conversion in pentane yields oligomers with structural units derived from the fragmentation products of the primary ozonide (a 1,2,3-trioxolane) which are namely butanone carbonyl oxide and acetaldehyde; these can be characterised by electrospray ionisation mass spectroscopy (ESI-MS) under soft ionisation conditions. The predominant oligomers formed are rich in carbonyl oxide units (80 + mol%) and are cyclic in nature. A small proportion of the oligomers formed are open chain compounds with end groups that suggest that chain termination is brought about either by water or by hydrogen peroxide. Residual water in the solvent will react with the carbonyl oxides to produce 2-methoxybut-2-yl hydroperoxide, which we propose readily decomposes generating hydrogen peroxide. A significant yield of oligomers also is obtained from the ozonolysis of a 1,2-alkyl substituted ethene. The ozonolysis of trans-hex-2-ene in pentane yields oligomers containing up to four structural units and are predicted to be mainly cyclic.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Ozonolysis of tetramethylethylene: characterization of cyclic and open-chain oligoperoxidic products

The ozonolysis of tetramethylethylene (TME) in solution to high conversion in nonparticipating solvents at -60 degrees C yields predominantly oligoperoxides. For the first time, these products have been characterized using electrospray ionization mass spectrometry (ESI-MS) under soft ionization conditions. The predominant structure formed in reactions carried out in pentane (up to 2.0 M TME) is shown to be the cyclic hexamer of acetone carbonyl oxide (oligocarbonyl oxide with degree of polymerization, n = 6), but cyclic structures with n up to 19 are observed. A small proportion of the oligoperoxides formed are open-chain compounds with end groups that suggest that chain termination of oligocarbonyl oxides can occur through reaction with either water or hydrogen peroxide. Ozonolysis in dried butyl acetate similarly produces mainly cyclic oligoperoxides. However, ozonolyses carried out in undried butyl acetate yield mainly open-chain oligoperoxides, confirming that propagating carbonyl oxide chains are readily terminated by water. Relative amounts of the open-chain oligomers so-formed suggest that undried butyl acetate contains ca. 0.1% w/w water. The ozonolysis of TME in the participating solvent, methanol, at -60 degrees C yields 2-methoxyprop-2-yl hydroperoxide via reaction of acetone carbonyl oxide with methanol; no oligoperoxidic products are formed in this case.     

Phosphate-selective electrodes containing immobilised ionophores

Phosphate selective electrodes have been produced based upon rubbery membranes containing heterocylic macrocycles as sensors covalently bound to a cross-linked polystyrene-block–polybutadiene-block–polystyrene (SBS) polymer. The membranes were robust and the best HPO₄²⁻-selective membrane fabricated was composed of 7.1% (m/m) dicumyl peroxide, 28.3% (m/m) 2-nitrophenyloctylether, 9.8% (m/m) 3-(10-undecenyl)-1,5,8-triazacyclodecane-2,4-dione, 31.0% (m/m) SBS and 23.8% (m/m) PoleStar™ 200R (clay-based filler). The characteristics of this electrode were a linear Nernstian range of 3.9×10⁻³ to 1×10⁻⁶ mol dm⁻³ HPO₄²⁻ with a limit of detection of 1.0×10⁻⁶ mol dm⁻³ HPO₄²⁻, a slope of −29.7±0.9 mV per activity decade and a pH range from 6 to 8. Selectivity coefficients for phosphate against various interfering anions (chloride, sulfate and nitrate) were determined. Response times were 2 min or under, stability of response and electrode lifetime in continuous use were also very satisfactory. The response behavior of HPO₄²⁻-ISEs based upon mobile and bound ionophores was comparable and suggests that mobility of the ionophore is not necessary to obtain a working ISE and that covalent binding of ionophores can be used to produce ISEs of increased stability and robustness.     

The determination of arsenic and selenium in coal by continuous flow hydride-generation atomic absorption spectrometry and atomic fluorescence spectrometry

Concentrated perchloric acid is used to digest coal for subsequent determination of arsenic and selenium by hydride-generation atomic absorption and fluorescence spectrometry. Arsenic and selenium are removed from potentially interfering metal ions by coprecipitation with lanthanum hydroxide. The detection limits, 58 and 36 ng g^?1 by atomic absorption and 25 and 10 ng g^?1 by atomic fluorescence, for arsenic and selenium in coal, respectively, are adequate for the normal levels of these metals.     

THE CHEMISTRY OF HETEROARYLPHOSPHORUS COMPOUNDS. PART XII.1 THE DIFFERENTIAL-PULSE POLAROGRAPHIC REDUCTION OF HETEROARYL-AND HETEROARYLMETHYLPHOSPHONIUM SALTS

Abstract

The polarographic reduction of series of heteroaryl- and heteroarylmethylphosphonium salts has been studied using a differential pulse polarographic technique, this having a number of advantages over classical dc polarography. For the salts Ar₃P⁺CH₂PhBr^-, the observed order of ease of reduction correlates with the electron-withdrawing ability of the heteroaryl group (i.e. Ar = 2-furyl > 2-thienyl > phenyl > 1-methylpyrrol-2-yl). In contrast, for the salts Ph₃P⁺CH₂ArBr^- (Ar = 2-furyl, 2-thienyl, phenyl, 1-methylpyrrol-2-yl, 3-thienyl and 3-furyl), the ease of reduction correlates best with the order of stability of the forming carbanions as established in earlier studies of the alkaline hydrolysis of these salts.