A subdomain boundary element method for high‐Reynolds laminar flow using stream function‐vorticity formulation

The paper presents a new formulation of the integral boundary element method (BEM) using subdomain technique. A continuous approximation of the function and the function derivative in the direction normal to the boundary element (further ‘normal flux’) is introduced for solving the general form of a parabolic diffusion‐convective equation. Double nodes for normal flux approximation are used. The gradient continuity is required at the interior subdomain corners where compatibility and equilibrium interface conditions are prescribed. The obtained system matrix with more equations than unknowns is solved using the fast iterative linear least squares based solver. The robustness and stability of the developed formulation is shown on the cases of a backward‐facing step flow and a square‐driven cavity flow up to the Reynolds number value 50 000. Copyright © 2004 John Wiley & Sons, Ltd.     

Characterisations of function spaces of generalised smoothness

We investigate function spaces of generalised smoothness of Besov and Triebel–Lizorkin type. Equivalent quasi-norms in terms of maximal functions and local means are given. An atomic decomposition theorem for this type of spaces is proved. Mathematics Subject Classification (2000) 46E35     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Copolymerization of styrene. V. Copolymerization with α-cyanocinnamamide

Copolymers of styrene with α-cyanocinnamamide were prepared by free radical initiation in bulk and in DMF solution and also by thermal initiation in bulk. The copolymerization parameters were determined by the conventional scheme of copolymerization and by an improved scheme taking into account the penultimate unit. Different values of the copolymerization parameters were obtained at the above mentioned different polymerization conditions, indicating the existence of a solvent effect. The influence of the comonomer on some of the basic properties, like intrinsic viscosity, solubility, melting range, and glass transition temperature and on some mechanical and behavior properties of the copolymers was studied in comparison with homopolystyrene.     

Graft copolymerization. I. Grafting of hydroxyalkyl methacrylates on poly(vinyl alcohol)

New graft copolymers were synthesized by grafting hydroxyethyl methacrylate and hydroxpropyl methacrylate on poly(vinyl alcohol) in aqueous solution with Ce⁺⁴ions as initiator. The dependence of the percentage of grafting and monomer conversion on the concentration of the monomer, on the concentration of the initiator, on the total concentration of the reactants, and on temperature and duration of the reaction were investigated. Some basic properties of the graft copolymers and some preliminary permeation measurements of water vapors through films, made from these copolymers, are also reported.     

Bestimmung der molaren Masse und der Ladungszahl von Polymerelektrolyten mit der Ultrazentrifuge

Zusammenfassung In der vorliegenden Arbeit wird das Sedimentationsgleichgewicht der Systeme Na₆[H₂W₁₂O₄₀]—NaCI—H₂O und Na₆[H₂W₁₂O₄₀]—NaClO₄— H2O untersucht. Die scheinbare molare Masse Mapp des Natriummetawolframats wird in beiden Systemen als Funktion der Natriummetawolfrarnat-Anfangspartialdichte ₀ ^PX _z gemessen. Durch lineare Extrapolation der Funktion Mapp = Mapp (PP,, ) auf die Polymerelektrolyt-Anfangspartialdichte Null können die Grenzwerte der scheinbaren molaren Masse (Mapp)o ermittelt werden. Aus den (Mapp)o-Werten wird die Abhängigkeit der Größe (ln _PXz /m _BX ) _mPXz von der NaCI- bzw. NaClO₄-Molalität berechnet.Die Bestimmung der molaren Masse und der (stöchiometrischen) Ladungszahl eines Polymerelektrolyten aus den experimentell ermittelten (Mapp)o-Werten unter Anwendung der Lamm-Williams-Gleichung wird diskutiert. Zur Ermittlung der beiden Größen müssen mehrere Versuchsreihen mit zwei verschiedenen Fremdelektrolyten durchgeführt werden. Externe Messungen sind nicht erforderlich.Man erhält auf diese Weise verläßliche Werte so-wohl der molaren Masse als auch der (stächiometrischen) Ladungszahl.

---

Summary The sedimentation equilibria of the systems sodium metatungstate-sodium chloride-water and sodium metatungstate-sodium perchlorate-water are investiated. In both systems the apparent molecular mass Mapp of sodium metatungstate (PX _z) is measured in dependence on partial density ₀ ^PX _z before centrifugation. By linear extrapolation of the function Mapp = Mapp ( ₀ ^PX _z the limiting value (Mapp)o for ₀ ^PX _z = 0 is obtained. The variation with sodium chloride and sodium perchlorate molality of the quantity (ln _{PX z} ^m _BX )mPX_z is calculated from (Mapp)o data.The determination of the molecular mass and the algebraic valency of a polymeric ion by means of the (Mapp)o values calculated by Lamm-Williams equation is discussed. In order to obtain these two quantities at least two series of experiments are required, each of which using a different supporting electrolyte. External measurements are not necessary. In this way reliable values for the molecular mass as well as for the stoichiometric valency are obtained.

---

---

Mit 5 Abbildungen und 3 Tabellen     

Trace-Aktivitätskoeffizienten und Ionenassoziation von Natriummetawolframat im System Natriummetawolframat-Natriumperchlorat-Wasser

Zusammenfassung In der vorliegenden Arbeit wird das Sedimentations-gleichgewicht des Systems Na₆[H₂W₁₂O₄₀]-NaClO₄-H₂O bei 25 °C untersucht. Die scheinbare Ladungszahl des Natriummetawolframats wird als Funktion der NaClO₄-MolalitätmNaClO₄ ermittelt. Aus dieser Abhängigkeit kann für die summarische Dissoziation des NatriummetawolframatsNa₂[H₂W₁₂O_4o] 6Na⁺ + [H₂W₁₂O₄₀]^6– die DissoziationskonstanteK in Gegenwart von NaClO₄ als Fremdelektrolyt zuK=0,08 mol⁶·kg^–6 bestimmt werden.Der Kreuzdifferentialquotient ( _PXz , ist der Trace-Aktivitätskoeffizient des Natriummetawolframats) wird ebenfalls als Funktion der NaClO₄-Molalität ermittelt.Die Konzentrationsabhängigkeit des Trace-Aktivitätskoeffizienten zeigt einen Verlauf, wie er unseres Wissens nach noch nicht von anderen Autoren beobachtet wurde.

---

Summary An ultracentrifugal study of the sedimentation equilibrium of the system Na₂[H₂W₁₂O₄₀]-NaClO₄-H₂Oat 25 °C is presented. The dependency of the apparent charge of the sodium metatungstate on NaClO₄-molality is investigated. From these data the dissociation constant for the dissociation of the sodium metatungstate in the presence of NaClO₄ according to the equationNa[H₂W₁₂O₄₀] 6Na⁺ + [H₂W₁₂O₄₀]^6– is calculated toK=0.08 mol⁶·kg^–6. The cross differential quotient ( _PXz is the trace activity coefficient of the sodium metatungstate) shows a behavior in its dependence on NaClO₄-molality which to our knowledge has not yet been reported by other authors.

---

---

Mit 5 Abbildungen und 1 Tabelle     

Enzymatic polyesterification in organic media. Enzyme-catalyzed synthesis of linear polyesters. I. Condensation polymerization of linear hydroxyesters. II. Ring-opening polymerization of ϵ-caprolactone

With the object to synthesize polyesters by enzymatic catalysis in organic media, two directions have been investigated: (1) the condensation polymerization of linear ω-hydroxyesters and (2) the ring-opening polymerization of lactones. The commercially-available crude porcine pancreatic lipase (PPL), suspended in organic solvents, was the preferred enzyme for the reactions. In order to determine the optimal conditions for the condensation polymerization, the bifunctional methyl 6-hydroxyhexanoate was used as a model compound to study the influence of the following parameters: type of the enzymecatalyst, kind of solvent, concentration, temperature, duration, size of the reaction mixture, and stirring. Film-forming polyesters with a degree of polymerization (DP) up to about 100 were obtained from linear aliphatic hydroxyesters in n-hexane at reflux temperature (69°C). Yet concurrently with the intermolecular condensation polymerization, macrolactones were also formed by intramolecular reaction. Two aromatic hydroxyesters did not react under these conditions. For the ring-opening polymerization of lactones the reaction of ?-caprolactone with methanol as the preferred nucleophile, was studied. Polyesters with a DP of up to 35 were obtained in n-hexane at temperatures between 25 and 40°C. The degrees of polymerization of the polyesters were determined by comparative analyses of the end groups in the ¹H-NMR spectra and by determination of molecular weights either by vapor phase osmometry, gel permeation chromatography, or intrinsic viscosity. © 1993 John Wiley & Sons, Inc.